Polymers Mixtures
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Liquid-liquid equilibria in aqueous two-phase ethanol/salt systems at different temperatures and their application to anthocyanins extraction
Abstract Aqueous two-phase systems (ATPS) are formed by mixtures of chemical species that, under certain conditions, separate into two immiscible phases, with water as the major component in global terms and, at lower concentrations, polymers, salts, ionic liquids and alcohols, depending on the system type. Different parameters influence ATPS equilibrium suc
Food Sci. Technol. Publicado em: 16/05/2019
-
2. Influence of Moringa oleifera derivates in blends of PBAT/PLA with LDPE
Abstract There are few studies about Moringa oleifera derivates in polymer developments where vegetable oil was used as a plasticizer and a biodegrading agent. The polymerization of moringa oil (MO) was carried out assisted by microwaves without catalysts presence. There aren’t studies about the polymerization of MO using microwaves technology. Moringa’
Polímeros. Publicado em: 28/06/2018
-
3. Modification of thermal and rheological behavior of asphalt binder by the addition of an ethylene-methyl acrylate-glycidyl methacrylate terpolymer and polyphosphoric acid
Abstract This study evaluated the modification effects of adding ethylene-methyl acrylate-glycidyl methacrylate terpolymer (EMGMA) in the presence of polyphosphoric acid (PPA) to an asphalt binder graded as 50/70 (0.1mm) in the Brazilian penetration grade specification (AC 50/70). The EMGMA terpolymer has been presented as a new alternative to modify asphalt
Polímeros. Publicado em: 2017-12
-
4. Effects of Aging on Chlorinated Plasma Polymers
Thin films deposited from propanol-chloroform-argon mixtures by plasma enhanced chemical vapor deposition at different partial pressures of chloroform in the feed, CCl, were characterized after two years of aging and their characteristics compared with their as-deposited properties. Film thickness decreased and surface roughness increased with aging. Surface
Mat. Res.. Publicado em: 20/03/2017
-
5. A novel approach in mucoadhesive drug delivery system to improve zidovudine intestinal permeability
ABSTRACT Zidovudine (AZT) mucoadhesive solid dispersions (SD) were prepared using a sodium starch glycolate (SSG) and hypromellose phthalate (HPMCP) mixtures as carrier to enhance the intestinal permeability and bioavailability of zidovudine. SDs were prepared using the co-precipitation method followed by solvent evaporation and characterized according to th
Braz. J. Pharm. Sci.. Publicado em: 2016-12
-
6. Biobased additive plasticizing Polylactic acid (PLA)
Polylactic acid (PLA) is an attractive candidate for replacing petrochemical polymers because it is from renewable resources. In this study, a specific PLA 2002D was melt-mixed with two plasticizers: triethyl citrate (TEC) and acetyl tributyl citrate (ATBC). The plasticized PLA with various concentrations were analyzed by differential scanning calorimetry (D
Polímeros. Publicado em: 2015-12
-
7. Strategies to improve the mechanical properties of starch-based materials: plasticization and natural fibers reinforcement
Biodegradable polymers are starting to be introduced as raw materials in the food-packaging market. Nevertheless, their price is very high. Starch, a fully biodegradable and bioderived polymer is a very interesting alternative due to its very low price. However, the use of starch as the polymer matrix for the production of rigid food packaging, such as trays
Polímeros. Publicado em: 20/05/2014
-
8. Effect of compatibilization and reprocessing on the isothermal crystallization kinetics of polypropylene/wood flour composites
Numerous studies have focused on polymer mixtures aimed at the potential applications of these materials. This work analyzed the effect of polymer reprocessing and the type and concentration of compatibilizer on the isothermal crystallization kinetics of polypropylene/wood flour composites. The composites, which were polypropylene grafted with acrylic acid (
Polímeros. Publicado em: 28/05/2013
-
9. Otimização do meio de cultura para a fermentação direta de melaço de cana para produção de ácido láctico por Lactobacillus delbrueckii spp. bulgaricus / Optimization of medium for direct fermentation of sugarcane molasses for lactic acid production by Lactobacillus delbrueckii spp. bulgaricus
The interest in lactic acid has grown strongly in the last years since the discovery of its properties of application in production of biodegradable and biocompatible polylactate polymers and their application as "green solvent¿ or ¿safety solvent¿ to processes of mixtures of solvents in the chemical industry. Considering the commercial potential of lacti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/09/2011
-
10. New PHA products using unrelated carbon sources
Polyhydroxyalkanoates (PHA) are natural polyesters stored by a wide range of bacteria as carbon source reserve. Due to its chemical characteristics and biodegradability PHA can be used in chemical, medical and pharmaceutical industry for many human purposes. Over the past years, few Burkholderia species have become known for production of PHA. Aside from tha
Braz. J. Microbiol.. Publicado em: 2011-12
-
11. Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending these materials are added to PLA in an melting procedure. We investigate ternary mixtures of PLA / PVA / chitosan system both the PVA / chit
Publicado em: 2010
-
12. Efeito de fibras sintéticas nas propriedades de ligantes e concretos asfálticos
The asphalt cement plays a major role in hot mix asphalts (HMA) by bonding the mineral aggregates and conferring impermeability. Despite the relatively small percentage of asphalt cement in hot mixes, the mechanical properties of asphalt layers are highly dependent on the quality of the binder. The physical and rheological properties of asphalt binders can b
Publicado em: 2010