Polymerization
Mostrando 13-24 de 1992 artigos, teses e dissertações.
-
13. Concomitant Production of Hydrogen, Sodium Acetate, and Polymerized Species from Non-Catalytic Ethanol Dehydrogenation
A detailed study of the production of hydrogen and high added-value liquid products from the ethanol dehydrogenation reaction in the presence of sodium hydroxide (10% m m-1) was undertaken. Experiments were carried out in a batch reactor under different reaction conditions (temperature of 240 ºC and autogenous pressure between 45 and 72 bar), with analysis
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
14. Influence of Modulated Photo-Activation on Shrinkage Stress and Degree of Conversion of Bulk-Fill Composites
Resumo O presente estudo teve como objetivo avaliar as propriedades de polimerização de materiais bulk-fill (baixa e alta viscosidade) utilizando luz contínua de alta intensidade e fotoativação intermitente em relação ao estresse de contração de polimerização e grau de conversão (DC). As seguintes resinas compostas Bulk-fill e nanohíbridas conve
Braz. Dent. J.. Publicado em: 28/11/2019
-
15. The use of a liner under different bulk-fill resin composites: 3D GAP formation analysis by x-ray microcomputed tomography
Abstract Gap formation of composite resin restorations is a serious shortcoming in clinical practice. Polymerization shrinkage stress exceeds the tooth-restoration bond strength, and it causes bacterial infiltration within gaps between cavity walls and the restorative material. Thus, an intermediate liner application with a low elastic modulus has been advis
J. Appl. Oral Sci.. Publicado em: 25/11/2019
-
16. Weathering Resistance of Waterborne Polyurethane Coatings Reinforced with Silica from Rice Husk Ash
Abstract: Waterborne polyurethanes (WPUs) are interesting materials for coatings when compared to solvent-based polyurethanes, once that reducing the concentration of volatile organic compounds that are harmful for human health and the environment. However, the WPU has low weathering resistance. In order to improve this behavior among others properties, ino
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
17. Influence of doping with Sm3+ on photocatalytic reuse of ZnO thin films obtained by spin coating
ABSTRACT The difficulty in the powder reuse favors the study of materials in the form of thin films. ZnO based films have high photocatalytic potential. In this work, ZnO:xSm3+ (x = 0, 1, 2 and 4 %mol) thin films were prepared by spin coating method. The resins obtained to manufacture the thin films were prepared by complex polymerization method. The samples
Matéria (Rio J.). Publicado em: 25/11/2019
-
18. EFEITO DO PH, ESPÉCIE E CONCENTRAÇÃO IÔNICA NA ABSORÇÃO DE ÁGUA DE HIDROGÉIS BIONANOCOMPÓSITOS CONSTITUÍDOS DE CMC/PAAM/LAPONITA RDS
The objective of this paper was to study the effect of pH, concentration and ionic species on the water absorption of the bionanocomposite hydrogels based on carboxymethylcellulose polysaccharide and laponite nanoclay. Bionanocomposite hydrogels were obtained via free radical polymerization. It was possible to observe that the swelling degree (Q) and kinetic
Quím. Nova. Publicado em: 21/10/2019
-
19. Gold Nanoparticles and [PEDOT-Poly(D,L-Lactic Acid)] Composite: Synthesis, Characterization and Application to H2O2 Sensing
Biocompatible electrochemical devices are challenging to develop due to the toxicity of many advanced electrode materials and the difficulty to degrade the discarded material. Few recent advances were made in the synthesis of conducting biodegradable composites of polymers for electrode materials. In this article we describe the synthesis of two new inorgani
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
20. Influence of graphene oxide on ‘in situ’ preparation of nanocomposites with polyvinyl butyral
ABSTRACT In this work, polyvinyl butyral (PVB) nanocomposites reinforced with 0.5 to 2.5 wt% of graphene oxide (GO) were synthesized via ‘in situ’ polymerization. PVB was obtained by condensation of hydroxyl groups of polyvinyl alcohol (PVA) with butyraldehyde (BU) Thermogravimetric analyzes (TGA) showed the increase in the thermal conductivity of the na
Matéria (Rio J.). Publicado em: 16/09/2019
-
21. Efeito dos ácidos itacônico e fumárico na copolimerização em emulsão do estireno com acrilato de n-butila para produção de argamassa cimentícia
RESUMO Monômeros carboxílicos são frequentemente empregados em formulações de polímeros obtidos via polimerização em emulsão e miniemulsão visando melhorar ás propriedades de aplicação dos látexes. O objetivo deste trabalho foi avaliar o efeito dos ácidos itacônico IAI), fumárico (AF) e metacrílico (AMA) na copolimerização em emulsão do
Matéria (Rio J.). Publicado em: 16/09/2019
-
22. Influência da concentração dos monômeros de acrilato e metacrilato de hidroxipropila na copolimerização em emulsão do estireno com acrilato de n-butila e acrilonitrila para produção de adesivos.
RESUMO Monômeros acrílicos contendo grupos hidroxila são frequentemente empregados na produção de polímeros, especialmente para aplicações em diferentes substratos ou mesmo em reações posteriores de modificação química com grupos isocianato ou carboxila. Este trabalho tem como objetivo estudar o efeito da concentração dos monômeros de acrilat
Matéria (Rio J.). Publicado em: 16/09/2019
-
23. Obtenção e caracterização de copolímeros de Poliacrilonitrila (PAN) para uso em processos de fiação em extrusora
RESUMO A disponibilidade de novos materiais, processos e equipamentos sempre traz perspectivas favoráveis ao mercado. A busca por processos alternativos e pela redução do custo da obtenção de precursores de materiais de alto desempenho tem se tornado primordial para o desenvolvimento do setor industrial de produtos com valores mais acessíveis, visando
Matéria (Rio J.). Publicado em: 16/09/2019
-
24. Numerical Simulation of Atom-Transfer Radical Polymerization of tert-butyl Methacrylate
Block copolymers based on tert-butyl methacrylate (tBMA) have many uses, such as thermo‐responsive polymers, amphiphilic copolymers, and many applications in the medical field. Atom-transfer radical polymerization (ATRP) is the main technique to produce these controlled macromolecular architectures. This paper provides a simplified kinetic modeling and com
Mat. Res.. Publicado em: 02/09/2019