Polymeric Materials
Mostrando 1-12 de 271 artigos, teses e dissertações.
-
1. ATIVIDADE ANTIMICROBIANA DE QUITOSANAS E SEUS DERIVADOS: INFLUÊNCIA DAS CARACTERÍSTICAS ESTRUTURAIS
In recent years, there has been an increasing interest in the development of antimicrobial materials for different applications, especially in the biomedical field. In this context, chitosan is one of the most employed materials due to its highly attractive properties, such as biocompatibility, biodegradability, non-toxicity, and antimicrobial activity again
Química Nova. Publicado em: 2022
-
2. Otimização da extração de antocianinas presentes no feijão-preto e impregnação do extrato em matriz polimérica natural para uso como indicador de pH
OPTIMIZATION OF THE EXTRACTION OF ANTHOCYANINS PRESENT IN BLACK BEANS AND IMPREGNATION OF THE EXTRACT IN NATURAL POLYMERIC MATRIX FOR USE AS A pH INDICATOR. In this work, a method of extracting natural indicators, anthocyanins, present in black beans was optimized. The best extraction condition was obtained with 50 g of beans and 93 g of water, under agitati
Química Nova. Publicado em: 2022
-
3. BIONANOCOMPÓSITOS POLIMÉRICOS À BASE DE MONTMORILLONITA – MATERIAIS DE INTERESSE CONTÍNUO
Polymeric bionanocomposites are versatile materials that have many practical applications. The wide use of these materials is mainly due to their structure and properties, which combine at nanometric scale, the functionality of biopolymers with the excellent stability of inorganic solids, such as the clay minerals family. Montmorillonite is the most widely e
Quím. Nova. Publicado em: 2020-12
-
4. Assessment of Reaction Parameters in the Polymeric Carbon Nitride Thermal Synthesis and the Influence in Photocatalytic Hydrogen Production
In this work, the reaction parameters for polymeric carbon nitride synthesis by thermal polycondensation were assessed, such as type of precursor, heating rate and time of thermal treatment, in order to obtain crystalline materials with high photocatalytic performance. All synthesized materials were tested as photocatalysts in hydrogen production using ethyl
J. Braz. Chem. Soc.. Publicado em: 2020-05
-
5. Halogen Determination in Polymeric Waste of Electrical and Electronic Equipment: Overcoming Limitations in Sample Preparation
Sample preparation of polymers for halogen determination requires special attention because they are difficult to bring into solution and due to the risk of analyte losses when using acid digestion. A method using microwave-induced combustion (MIC) was optimized for accurate determination of halogens in polymeric parts obtained in waste of electrical and ele
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Efeito da temperatura de sinterização e da adição de fibras poliméricas em cerâmica porosa obtida a partir de resíduos do processo Kraft
Resumo O processo Kraft gera resíduos que podem ser aplicados em diversos processos produtivos, substituindo matérias-primas comerciais, como lama de cal e areia, ricos em carbonato de cálcio e sílica, respectivamente. Neste trabalho foi realizado um estudo para obtenção de cerâmicas porosas a partir da valorização desses resíduos, utilizando-se fi
Cerâmica. Publicado em: 15/08/2019
-
7. Tribology of natural Poly-Ether-Ether-Ketone (PEEK) under transmission oil lubrication
Abstract High performance polymeric materials such as poly-ether-ether-ketone (PEEK) are increasingly being used for challenging tribological applications in order to replace metal parts in vehicle engines and transmissions. The tribology of natural PEEK, under oil-lubricated conditions, was studied for different metal counterbody finishes. Two different fin
Polímeros. Publicado em: 04/07/2019
-
8. Biodegradable oil-based polymeric coatings on urea fertilizer: N release kinetic transformations of urea in soil
ABSTRACT: Polymer coatings are used to control the rate of release of plant available nutrients from fertilizers as well as to reduce nutrient losses such as ammonia (NH3) volatilization. Although the literature presents several examples of materials used to coat urea, little is known about nitrogen (N) release properties such as the mechanism involved and p
Sci. agric. (Piracicaba, Braz.). Publicado em: 01/07/2019
-
9. Hydrothermal Synthesis to Water-stable Luminescent Carbon Dots from Acerola Fruit for Photoluminescent Composites Preparation and its Application as Sensors
Carbon dots (C-dots) possess the attractive properties of high stability, low toxicity, good water solubility, simple synthetic routes as well as size and excitation-dependent photoluminescence (PL).The aim of this work was to synthesize photoluminescent C-dots by hydrothermal method using acerola fruit (Malpighiaemarginata) as a row material, since this fru
Mat. Res.. Publicado em: 06/06/2019
-
10. THE MULTIROLE OF MODIFIED NATURAL GUMS FOR MULTICOMPONENT POLYMERS: AS COUPLING AGENTS FOR POLYMERS REINFORCED WITH CELLULOSIC FIBERS OR COMPATIBILIZERS FOR BIODEGRADABLE POLYMER BLENDS
In this work, the capability to use pine rosin as a biodegradable coupling agent/compatibilizer is studied. To formulate composites, post-consumer polypropylene and discarded agave fibers (as reinforcing agent) are coupled with pine rosin (in pure or maleated form). Besides, poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) are comp
Quím. Nova. Publicado em: 02/05/2019
-
11. Application of ashes as filling in reprocessed polypropylene: thermomechanical properties of composites
Abstract The life cycle of a product depends to a great extent on its reuse and ease of recycling. This work had developed of composite materials of reprocessed polypropylene composites with rice husk ash (RHA) and sugarcane bagasse ash (SBA) through the coextrusion and injection processes as main purpose. The polymeric matrix was reprocesed until six gener
Polímeros. Publicado em: 28/03/2019
-
12. Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homoge
Cerâmica. Publicado em: 2019-01