Polymeric Compounds
Mostrando 1-12 de 105 artigos, teses e dissertações.
-
1. RAMAN STUDIES OF BIS(PHENYLTERPYRAZINE)IRON(II) AND SUPRAMOLECULAR SPECIES WITH PENTACYANIDOFERRATE(II) IONS
The chemistry and spectroscopy of the iron(II) phenylterpyrazine complex, [Fe(phtpz)2]2+, were investigated in comparison with the analogous phenylterpyridine species, Fe(phtpy)2]2+, and the results indicated a strong electronic delocalization on the Fe(II) terimine chromophore encompassing the lateral pyrazyl groups. The delocalized nature of the molecular
Quím. Nova. Publicado em: 05/12/2019
-
2. Use of Copper Microparticles in SEBS/PP Compounds. Part 1: Effects on Morphology, Thermal, Physical, Mechanical and Antibacterial Properties
An alternative for producing thermoplastic elastomers (TPEs) with antibacterial properties is to add copper to the polymeric matrices. This study investigates the effects of the addition of copper microparticles on the morphological, thermal, physical and mechanical behavior and antibacterial properties of a blend composed by styrene-(ethylene-butylene)-styr
Mat. Res.. Publicado em: 11/02/2019
-
3. Thermomechanical Properties of Corn Starch Based Film Reinforced with Coffee Ground Waste as Renewable Resource
Abstract Starches polymeric films offer several advantages for the replacement of synthetic polymers due to their biodegradability, non-toxicity, availability and low cost. However, the high biodegradation potential can cause fragility, considering some fundamental mechanical properties. Therefore, starch based polymeric films were reinforced incorporating l
Mat. Res.. Publicado em: 07/01/2019
-
4. Izod impact energy study of re-forced polisher matrix compounds with curaous fibers aligned and epoxy matrix reinforced with piassava fibers
ABSTRACT Polymer matrix composites have been applied in components such as helmets and shielding for which toughness is a major requirement. Natural fiber presents interfacial characteristics with polymeric matrices that favor a high impact energy absorption by the composite structure. The objective of this work was then to assess the Izod impact resistance
Matéria (Rio J.). Publicado em: 06/12/2018
-
5. Polydimethylsiloxane as a Matrix for the Stabilization and Immobilization of Zero-Valent Iron Nanoparticles. Applications to Dehalogenation of Environmentally Deleterious Molecules
A wet-synthetic method is described to obtain magnetic, air-stable, zero-valent iron nanoparticles coated with an alkanedioic acid. The particles can be immobilized in an amino-substituted polysiloxane matrix to provide materials capable of dechlorinating, debrominating, and deiodinating a wide variety of halogenated organic molecules dissolved initially in
J. Braz. Chem. Soc.. Publicado em: 2018-07
-
6. Damping of the Woodwind Instrument Reed Material Arundo donax L
The viscoelastic properties (E', G', tanΦ, δ) of Arundo donax (AD) and a polypropylene-beech fiber composite (PPC) were measured from RT to 580K for various frequencies and strains. E' of AD varies between 5250-6250MPa depending on ageing at RT while E'(RT)=2250MPa of PPC is signifcantly lower. E' of the AD is higher than E' of PPC in the whole investigate
Mat. Res.. Publicado em: 04/06/2018
-
7. POLÍMERO BIODEGRADÁVEL ANTIMICROBIANO ATRAVÉS DA ADITIVAÇÃO COM COMPOSTOS À BASE DE ZINCO
Antimicrobial packaging is a promising type of active packaging, which has an antimicrobial agent incorporated into the polymer matrix, capable to eliminate or inhibit deteriorating and/or pathogenic microorganisms. The zinc compounds are antimicrobial agents commonly used to confer this feature. The objective of this work was to evaluate the antimicrobial a
Quím. Nova. Publicado em: 2018-04
-
8. Efecto inhibidor del dióxido de germanio sobre el biofouling del puerto de Mar del Plata
ABSTRACT Marine biofouling on any new material immersed in seawater can lead to extra costs due to increased maintenance, or/and even mechanical wear, and/or biodeterioration that require costly antifouling measures. Fouling organisms growing on immersed manmade surfaces affect hulls, piers, buoys, aquaculture and pipes mainly. Following adsorption of a cond
Matéria (Rio J.). Publicado em: 05/03/2018
-
9. Evaluation of polymeric PLGA nanoparticles conjugated to curcumin for use in aPDT
ABSTRACT Antimicrobial photodynamic therapy (aPDT) involves the association of a photosensitizing agent with a light source with the goal of causing apoptosis or microbial lysing. The use of compounds with natural active principles is gaining prominence throughout the world. Several studies from groups that are linked to the development of innovations in the
Braz. J. Pharm. Sci.. Publicado em: 20/07/2017
-
10. Determination of Chlorophenol in Environmental Samples Using a Voltammetric Biosensor Based on Hybrid Nanocomposite
In this work, a simple electrochemical biosensor for 4-chlorophenol was developed based on laccase immobilized on a hybrid nanocomposite (ZnO nanoparticles/chitosan), and incorporated in a carbon paste electrode. There are few biosensors in the literature for this specific pollutant because it tends to form polymeric films on the electrode, causing surface p
J. Braz. Chem. Soc.. Publicado em: 2017-07
-
11. ANALYSIS OF THERMAL AND AQUEOUS SUSPENSION STABILITIES OF CHITOSAN BASED NANOENCAPSULATED VITAMINS
The food nutritional content is reduced as result of vitamins degradation. In order to minimize such losses, the encapsulation technique into polymeric nanoparticles (NPs) could offer an additional protection, extending the stability. The crosslinking formed by the ionic gelation process of chitosan and tripolyphosphate (Chi-TPP) has been widely used as an e
Quím. Nova. Publicado em: 2016-11
-
12. Spectroscopic Properties of pigment Li2-xZn1-xPrxTi3O8
Inorganic compounds doped with rare earths (Ce3+, Pr3+, Nd3+, Sm3+, Eu 3+, Gd 3+, Tb 3+, Tm3+) have been used in various applications including light-emitting devices such as fluorescent lamps, cathode ray tubes, lasers and inorganic pigments. In this study, Pr3+ is doped in spinel Li2ZnTi3O8 system and synthesized by the polymeric precursor method, which is
Mat. Res.. Publicado em: 14/06/2016