Polymeric Composites
Mostrando 1-12 de 122 artigos, teses e dissertações.
-
1. Preparation of Syntactic Foams made from Green Polyethylene and Glass Microspheres: Morphological and Mechanical Characterization
Polymeric syntactic foams are composites made from the mixture of Hollow Glass Microspheres (HGM) and polymer matrices. One of their main characteristics is their low density and the production of these composites using a matrix derived from renewable sources potentiates their development without neglecting sustainability. In this paper , the properties of H
Mat. Res.. Publicado em: 11/11/2019
-
2. Crosslinking starch/oat hull mixtures for use in composites with PLA
Abstract Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of subs
Polímeros. Publicado em: 10/10/2019
-
3. Hydrothermal Synthesis to Water-stable Luminescent Carbon Dots from Acerola Fruit for Photoluminescent Composites Preparation and its Application as Sensors
Carbon dots (C-dots) possess the attractive properties of high stability, low toxicity, good water solubility, simple synthetic routes as well as size and excitation-dependent photoluminescence (PL).The aim of this work was to synthesize photoluminescent C-dots by hydrothermal method using acerola fruit (Malpighiaemarginata) as a row material, since this fru
Mat. Res.. Publicado em: 06/06/2019
-
4. THE MULTIROLE OF MODIFIED NATURAL GUMS FOR MULTICOMPONENT POLYMERS: AS COUPLING AGENTS FOR POLYMERS REINFORCED WITH CELLULOSIC FIBERS OR COMPATIBILIZERS FOR BIODEGRADABLE POLYMER BLENDS
In this work, the capability to use pine rosin as a biodegradable coupling agent/compatibilizer is studied. To formulate composites, post-consumer polypropylene and discarded agave fibers (as reinforcing agent) are coupled with pine rosin (in pure or maleated form). Besides, poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) are comp
Quím. Nova. Publicado em: 02/05/2019
-
5. Application of ashes as filling in reprocessed polypropylene: thermomechanical properties of composites
Abstract The life cycle of a product depends to a great extent on its reuse and ease of recycling. This work had developed of composite materials of reprocessed polypropylene composites with rice husk ash (RHA) and sugarcane bagasse ash (SBA) through the coextrusion and injection processes as main purpose. The polymeric matrix was reprocesed until six gener
Polímeros. Publicado em: 28/03/2019
-
6. Izod impact energy study of re-forced polisher matrix compounds with curaous fibers aligned and epoxy matrix reinforced with piassava fibers
ABSTRACT Polymer matrix composites have been applied in components such as helmets and shielding for which toughness is a major requirement. Natural fiber presents interfacial characteristics with polymeric matrices that favor a high impact energy absorption by the composite structure. The objective of this work was then to assess the Izod impact resistance
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. Comparison of Cellulose Extraction from Sugarcane Bagasse Through Alkali
This article investigated the cellulose obtained from sugarcane bagasse by five different extraction mercerization methods. The comparison of the methods gives a clearer picture of that is more effective and feasible for production of SCB cellulose. All the celluloses were characterised by X-Ray Diffraction (XRD), Fourier Transform Infrared (FT-IR), Thermal
Mat. Res.. Publicado em: 29/10/2018
-
8. An Evaluation of the Dielectric Barrier Discharge Treatment on the Mechanical, Structural and Morphological Properties of Carbon Fibers
ABSTRACT: Carbon fibers (CFs) have been widely applied in the manufacture of polymeric composites. The mechanical properties of these composites depend on the adhesion in the matrix/CF interface. Since the CFs have poor adhesion properties, a surface treatment of the CFs becomes necessary. The plasma process used in this work was the dielectric barrier disch
J. Aerosp. Technol. Manag.. Publicado em: 29/03/2018
-
9. Use of Amphiphilic Composites based on Clay/Carbon Nanofibers as Fillers in UHMWPE
In this work, it is proposed a new strategy to improve the dispersion of inorganic fillers in polymeric matrices by producing surface carbon nanostructures. Clay/carbon nanofibers particles were prepared and used as fillers to improve the mechanical and thermal properties of ultra-high molecular weight polyethylene (UHMWPE). Thermogravimetry (TG), differenti
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
10. Influence of tribological test on the global conversion of natural composites
Abstract The vinyl ester resins and natural composites have emerged as a suitable alternative in tribological application due to mechanical behavior, which relates to the conversion of the double bonds. During tribological test the permanent contact between polymeric sample and counterpart can increase the temperature affecting the crosslinking of the sample
Polímeros. Publicado em: 2017-12
-
11. Nanostructured magnetic alginate composites for biomedical applications
Abstract This is a study of the preparation and characterization of polymeric-magnetic nanoparticles. The nanoparticles used were magnetite (Fe3O4) and the chosen polymers were alginate and chitosan. Two types of samples were prepared: uncoated magnetic nanoparticles and magnetic nanoparticles encapsulated in polymeric matrix. The samples were analyzed by XR
Polímeros. Publicado em: 2017-12
-
12. The use of Shearography technique to evaluate polymeric composite repairs - case study
ABSTRACT Pipelines are subject to a variety of defects such as wall thickness loss, grooves, dents and holes. To restore the pipe integrity, polymeric composite repairs can be used. The inspection of repaired pipes is of fundamental importance, not only to verify the initial integrity, but also to monitor their state over time. Shearography is a laser optica
Matéria (Rio J.). Publicado em: 09/10/2017