Polymer Nanocomposite
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Evaluation of the dispersion of carbon nanotubes in an elastomeric polyurethane and fatigue test
Abstract Two series of polyurethane (PU) and carbon nanotubes (CNT) based composites with 0.0, 0.25, 0.5 and 1.0 mass% of CNT were obtained from diluting a commercial masterbatch with 30 mass% CNT and using two different dispersion methods. The quality of the dispersions was assessed using optical microscopy, and scanning and transmission electron microscop
Polímeros. Publicado em: 18/03/2019
-
2. Preparation and Characterization of Clay-polymer Nanocomposite Having Covalently-bound poly(norbornenes) with Pendant Cholesterols
We have successfully prepared a clay-based polymer nanocomposite having grown cholesterol bearing poly(norbornene) brushes end-tethered from a naturally-occurring montmorillonite clay template. The synthesis of this hybrid material involved the treatment of the clay with first generation Grubbs catalyst, a ruthenium alkylidene, which induced a ring-opening m
Mat. Res.. Publicado em: 10/01/2019
-
3. Fabrication of poly(lactic acid) incorporated chitosan nanocomposites for enhanced functional polyester fabric
Abstract This study dealt with the fabrication and analysis of poly(lactic acid) (PLA) mediated chitosan nanocomposite. Such a novel nanobiocomposite may get future applications in drug delivery, and nanofinising of textile and polymer surfaces. Herein, this nanocomposite has been considered as an antibacterial finishing agent for a hydrophobic textile fabr
Polímeros. Publicado em: 21/05/2018
-
4. Preparation, Characterization and Photostability of Nanocomposite Films Based on Poly(acrylic acid) and Montmorillonite
Polyacrylic acid (PAA)/clay mineral (SWy-1) nanocomposites were prepared by intercalation in solution and their photostability was evaluated. For the nanocomposite films containing 5, 10 and 20 wt % in SWy-1 mass occurred intercalation along with some clay exfoliation, while for PAA/30%SWy-1, the intercalation of PAA chains into the clay interlayers was obse
Mat. Res.. Publicado em: 07/05/2018
-
5. HIDROGÉIS NANOCOMPÓSITOS DE POLISSACARÍDEO COM ZEÓLITA: AVALIAÇÃO DO PROCESSO DE ADSORÇÃO DO PESTICIDA PARAQUAT
In this work, nanocomposites formed from the natural polymer carboxymethylcellulose in combination with the polyacrylamide polymer and zeolite were obtained and characterized in relation to pesticide sorption capability. Hydrogels are three-dimensional network with large capacity of water or biological fluid adsorption. They have biocompatibility, biodegrada
Quím. Nova. Publicado em: 2018-04
-
6. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
7. Effect of clay incorporation in the dimensional stability of FKM nanocomposite
ABSTRACT In this work was studied the effect of nanoparticle incorporation in the dimensional stability of elastomer matrix. To avoid excessive swelling and consequently dimensional instability in the films, crosslinking has been shown to be an efficient and simple method for achieve the reducing membrane swelling and improving mechanical stability. The elas
Matéria (Rio J.). Publicado em: 20/07/2017
-
8. Characterization and Evaluation of Silver-Nanoparticle-Incorporated in Composite Graphite Aiming at their Application in Biosensors
Abstract Biosensors based on nanomaterial composites have been investigated for their potential to function as high sensitivity signal response devices. In the present study, we report the fabrication of silver nanoparticles (AgNPs) on a graphite epoxy composite electrode (GEC) and mixed with the polyaniline (a conductive emeraldine salt form polymer) compos
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
9. Effect of Dental Restorative Material Type and Shade on Characteristics of Two-Layer Dental Composite Systems
Abstract The purpose of this study was to investigate the effects of shade and material type and shape in dental polymer composites on the hardness and shrinkage stress of bulk and two-layered restoration systems. For this purpose, some bulk and layered specimens from three different shades of dental materials were prepared and light-cured. The experiments w
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
10. Nanocomposite of Poly(Lactic Acid)/Cellulose Nanocrystals: Effect of CNC Content on the Polymer Crystallization Kinetics
The barrier and mechanical properties of polymer matrices are affected by the polymer crystallization kinetics and the incorporation of nanoparticles can modify the nucleation density as well as the rate and mechanism of crystallization. In this study, a nanocomposite of poly(lactic acid) (PLA) containing cellulose nanocrystals (CNC) was prepared in order to
J. Braz. Chem. Soc.. Publicado em: 2016-05
-
11. 3D nanocomposite chitosan/bioactive glass scaffolds obtained using two different routes: an evaluation of the porous structure and mechanical properties
Porous synthetic substrates are developed through tissue engineering technologies to grow new tissue, restoring the function of tissue or an organ. For bone regeneration, these scaffolds must support the dynamic load exerted on this tissue, achieved primarily by increasing their compression strength, as established in the literature. The aim of this paper wa
Quím. Nova. Publicado em: 2016-05
-
12. Characterization of clay filled poly (butylene terephthalate) nanocomposites prepared by solution blending
Kaolin clay/poly (butylene terephthalate) (clay/PBT) composites films were prepared by solution casting technique. The scanning electron microscope (SEM) study showed that clay particles were well dispersed and embedded within the PBT matrix. The TGA thermograms showed that the thermal stability of PBT matrix was slightly improved by the incorporation of cla
Polímeros. Publicado em: 04/12/2015