Polymer Gel
Mostrando 1-12 de 206 artigos, teses e dissertações.
-
1. BIODEGRADABLE SODIUM CARBOXYMETHYL CELLULOSE MEMBRANES CONTAINING MELALEUCA ESSENTIAL OILS FOR WOUND CARE MATERIAL
NaCMC is a biocompatible polymer that can be crosslinked with citric acid to form a gel matrix. Melaleuca oils have antimicrobial and anti-inflammatory properties with potential for wound healing. The goal of this work was to investigate the characteristics of NaCMC-Melaleuca oils gels. The gels were characterized by FTIR, TGA, mechanical analysis, and in vi
Química Nova. Publicado em: 2022
-
2. Alcoholmeter as a Simple and Accessible Way for Ethanol Determination in Alcohol-Based Hand Sanitizers
Expensive and complex methodologies are available to determine the ethanol concentration in alcohol gel samples. The aim of this article was to demonstrate that alcoholmeter could be used as an alternative method to determine ethanol in gel formulations. Alcohol gel samples were produced using: hydroxypropylmethylcellulose (HPMC), hydroxyethylcellulose (HEC)
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
3. Hybrid Hydrogels Based on Polyethylene Glycol Bioconjugated with Silylated-Amyloidogenic Peptides
Hybrid-peptide hydrogel arrangements are a promising alternative to obtaining biocompatible structures at the nanoscopic scale. In this work, a new class of hybrid hydrogels was obtained through the sol-gel process based on the reaction between an amyloid-like octapeptide sequence [RF]4 (where R = arginine and F = phenylalanine) covalently bonded with glycin
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
4. Synthesis and Characterization of Hybrid Polymer Based on Functionalized Silica as Efficient Adsorbent for Heavy Metal Ions from Aqueous Solution
An organic-inorganic hybrid material based on a silica matrix and functionalized with imidazole group was successfully synthesized by the sol-gel process. The characterization techniques enabled the confirmation of the proposed structure as well as the effectiveness of the imidazole ring functionality in the structure of the material. It is insoluble in wate
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
5. Urea-based polymethacrylamide purification
ABSTRACT A purification procedure of polymethacrylamide (PMAm) based on the urea feature of being a powerful Hbond breaker is proposed here. Polymethacrylamide was synthesized in water and the final product presents itself as an insoluble gel what is an obstacle to purification. This physical gel, kept together by numerous interchain H-bonds between amide gr
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Fotodegradação de hidrogel de poliacrilamida na presença de substâncias químicas para o uso na agricultura
RESUMO Utilizado na agricultura como condicionante do solo, a poliacrilamida, constituinte básico do hidrogel, tem a característica de absorver, por processo físico, água e a estocar para as plantas conforme sua necessidade hídrica. Entretanto, a poliacrilamida sofre degradação de sua cadeia, devido à ação da radiação ultravioleta e de sais prese
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Propriedades de adesivo aplicado em painéis a partir da substituição por lignossulfonato do processo sulfito
Resumo Considerando a indústria de painéis aglomerados, a maior parte utiliza adesivos sintéticos, especialmente, à base de ureia-formaldeído, e nesse sentido, estudos que englobam as características de materiais alternativas para a indústria de painéis tornam-se importantes, especialmente quando se considera o custo final dos produtos gerados. O pre
Ciênc. Florest.. Publicado em: 30/05/2019
-
8. Preliminary analysis of N-vinylpyrrolidone based polymer gel dosimeter
Abstract This paper aims to evaluate the dosimetric characteristics of modified VIPARnd for radiotherapy dosimetry using optical investigations. The absorbance spectrum of the irradiated gel dosimeter was evaluated optically with spectrophotometer techniques and with a CMOS imaging system. The useful dose range for the peak value and the relative area under
Polímeros. Publicado em: 29/11/2018
-
9. Sulfonation degree effect on ion-conducting SPEEK-titanium oxide membranes properties
Abstract Polymeric membranes were developed using a SPEEK (sulfonated poly(ether ether ketone)) polymer matrix, containing titanium oxide (TiO2) (incorporated by sol-gel method). SPEEK with different sulfonation degrees (SD): 63% and 50% were used. The influence of sulfonation degree on membrane properties was investigated. The thermal analysis (TGA and DTGA
Polímeros. Publicado em: 21/09/2017
-
10. Calcium Phosphate Coatings by Sol-Gel on Acrylonitrile-butadiene-styrene Substrate
Additive manufacture is an effective technology to produce complex macrostructures from polymers. Sol-gel is a chemical process that affords multifunctional materials by functionalization of different substrates. This work reports on the use of acrylonitrile-butadiene-styrene polymer (ABS) as starting material to obtain a substrate by additive manufacture. C
J. Braz. Chem. Soc.. Publicado em: 2017-06
-
11. Waterborne hyperbranched alkyd-acrylic resin obtained by miniemulsion polymerization
Abstract Four waterborne hyperbranched alkyd-acrylic resins (HBRAA) were synthesized by miniemulsion polymerization from a hyperbranched alkyd resin (HBR), methyl methacrylate (MMA), butyl acrylate (BA) and acrylic acid (AA), by using benzoyl peroxide (BPO) and ammonium persulfate (AP) as initiators. The reaction between HBR and acrylic monomers was evidence
Polímeros. Publicado em: 08/12/2016
-
12. 3D nanocomposite chitosan/bioactive glass scaffolds obtained using two different routes: an evaluation of the porous structure and mechanical properties
Porous synthetic substrates are developed through tissue engineering technologies to grow new tissue, restoring the function of tissue or an organ. For bone regeneration, these scaffolds must support the dynamic load exerted on this tissue, achieved primarily by increasing their compression strength, as established in the literature. The aim of this paper wa
Quím. Nova. Publicado em: 2016-05