Polymer Composite Laminates
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Strain-deformation Reconstruction of Carbon Fiber Composite Laminates Based on BP Neural Network
The Carbon Fiber Reinforced Polymer (CFRP) laminate structural components used in the aerospace and military domains require high precision and strong stability. Usually the deformation of these structural components is difficult to be measured directly during operation, but the deformation of the CFRP laminate structure can be reconstructed with strain info
Mat. Res.. Publicado em: 14/11/2019
-
2. Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines
Abstract To simulate the progressive failure of pinned joint in quasi-isotropic [0/45/-45/90]s glass fiber reinforced polymer (GFRP) composite laminates used in pipeline, 3-D finite element model is employed in the present work. Hashin failure criterion as a progressive damage model associated with Virtual-Crack-Closing-Technique (VCCT) delamination model h
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
3. Ballistic Efficiency of Multilayered Armor Systems with Sisal Fiber Polyester Composites
The urban violence and the different types of global armed conflicts demand efficient protective systems against high energy ammunition. Multilayered Armor Systems (MAS) provide efficient protection by making use of lighter and more efficient materials. A typical MAS may be composed of three layers: a front ceramic followed by a composite, backed by a ductil
Mat. Res.. Publicado em: 15/01/2018
-
4. Polymer Composites Reinforced with Hybrid Fiber Fabrics
In an effort to show the influence of the hybridization method in hybrid fabric reinforced composites within the characteristic of the fracture and the mechanical properties, two laminate reinforced with bi-directional woven were developed, where one of them was reinforced with a hybrid strand (hybrid strand composite laminate) and the other with a different
Mat. Res.. Publicado em: 06/03/2017
-
5. Evaluating the mechanical properties of E-Glass fiber/carbon fiber reinforced interpenetrating polymer networks
A series of vinyl ester and polyurethane interpenetrating polymer networks were prepared by changing the component ratios of VER (Vinyl ester) and PU (Polyurethane) and the polymerization process was confirmed with Fourier Transform infrared spectroscopy. IPN (Inter Penetrating Polymer Network - VER/PU) reinforced Glass and carbon fiber composite laminates w
Polímeros. Publicado em: 2015-02
-
6. Comparação entre métodos de inspeção não-destrutiva aplicados a peças compósitas laminadas sólidas estruturais aeronáuticas / Comparing nondestructive inspection methods applied to aeronautical grade solid structural composite laminated parts
Diversos métodos de ensaios não-destrutivos (Ultrasom, Radiografia, Termografia e Shearografia) foram empregados na inspeção de peças laminadas estruturais compósitas sólidas de matriz polimérica manufaturadas pela indústria aeronáutica. Concluiu-se que Ultrasom pulso-eco convencional de contato foi a técnica mais abrangente na indicação de desc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/06/2011
-
7. Thermographic inspection of impact damage in solid fiber-reinforced polymer matrix composite laminates. / Inspeção termográfica de danos por impacto em laminados compósitos sólidos de matriz polimérica reforçada com fibras de carbono.
Continuous carbon fiber-reinforced thermosetting and thermoplastic composite laminates were exposed to single transversal impact with different energy levels. The damages marked to the structural materials were evaluated by active infrared thermography in transmission mode. In general, the thermoplastic laminate thermograms showed more clear and delineated d
Publicado em: 2010
-
8. A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures
Weight reduction and improved damage tolerance characteristics were the prime drivers to develop new family of materials for the aerospace/aeronautical industry. Aiming this objective, a new lightweight Fiber/Metal Laminate (FML) has been developed. The combination of metal and polymer composite laminates can create a synergistic effect on many properties. T
Materials Research. Publicado em: 2006-09