Polyester Resin
Mostrando 13-24 de 43 artigos, teses e dissertações.
-
13. Penetration of a resin-based filling material into lateral root canals and quality of obturation by different techniques
The aim of this study was to evaluate the penetration of a resin/polyester polymer-based material (Resilon Real Seal; SybronEndo Corp., Orange, USA) into simulated lateral canals, and the quality of obturations by different techniques. A total of 30 standardized simulated canals were divided into three groups according to the technique of obturation used: MS
Braz. oral res.. Publicado em: 02/12/2014
-
14. Laminated composite based on polyester geotextile fibers and polyurethane resin for coating wood structures
New environmental laws have restricted the use of hardwood trees in overhead power lines structures, such as, poles and cross-arms, leading companies to seek alternative materials. Reforested wood coated with polymeric resin has been proposed as an environmental friendly solution, with improved electrical properties and protection against external agents, e.
Mat. Res.. Publicado em: 21/06/2013
-
15. Square-wave voltammetric determination of rutin in pharmaceutical formulations using a carbon composite electrode modified with copper (II) phosphate immobilized in polyester resin
Descreve-se um eletrodo de carbono modificado com fosfato de cobre (II) imobilizado em uma resina de poliéster (Cu3(PO4)2-Poly) para a determinação de rutina em amostras farmacêuticas por voltametria de onda quadrada. O eletrodo modificado permite a determinação de rutina em potencial (0.20 V vs Ag / AgCl (3,0 mol L-1 KCl)) menor que o observado em um
Braz. J. Pharm. Sci.. Publicado em: 2012-12
-
16. Influence of glass and sisal fibers on the cure kinetics of unsaturated polyester resin
The effect of grinded glass and sisal fibers (25 vol%) on the cure kinetics of composites of unsaturated polyester resin (UPR) was investigated by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The DSC analysis was carried out at four different heating rates (5, 10, 20 and 40 °C/min), and the cure enthalpy and activation ene
Materials Research. Publicado em: 26/06/2012
-
17. Polyurethane structural adhesives applied in automotive composite joints
In recent years structural adhesives technology has demonstrated great potential for application due to its capacity to transform complex structures into solid unitary and monolithic assemblies using different materials. Thus, seams or joints integrate these structures providing, besides a reduction in weight, a considerable increase in the mechanical resist
Materials Research. Publicado em: 08/05/2012
-
18. Experimental investigation on the effects of recycled aggregate on fracture behavior of polymer concrete
The sustainable management of solid wastes stimulates metallurgic and metal mechanics industries to look for safety applications for these wastes. The present paper examines the fracture behavior of polymer concrete (PC) manufactured with recycled foundry waste in substitution of fresh one. The recycled foundry sand is contaminated with polymer resin from th
Materials Research. Publicado em: 26/08/2011
-
19. Bending in laminas of NFPR: type of reinforcement, fracture and properties
Natural fiber reinforced plastics (NFRP) have awakened considerable interest in the area of polymer composites, because of the need to develop new, environmentally friendly materials. One of the most complex ways of manufacturing this type of material is in the form of ultrathin laminar layers; however, this process hinders mechanical testing, mainly three a
Materials Research. Publicado em: 04/03/2011
-
20. RESTARTABILITY OF VISCOPLASTIC MATERIALS IN PIPES / REINÍCIO DE ESCOAMENTO DE MATERIAIS VISCOPLÁSTICOS EM UM TUBO
On of the main problems in the operation of subsea pipelines that convey paraffin oils is the flow startup after long stoppages. Along the path from the reservoir to the platform, the oil experiences significant heat losses, especially to the low-temperature water at the sea bottom. When there is no flow, the oil may reach very low temperatures. Cooling indu
Publicado em: 2011
-
21. Fracture mechanics of polymer mortar made with recycled raw materials
The aim of this work is to show that industrial residues could be used in construction applications so that production costs as well as environmental protection can be improved. The fracture properties of polymer mortar manufactured with recycled materials are investigated to evaluate the materials behaviour to crack propagation. The residues used in this wo
Materials Research. Publicado em: 2010-12
-
22. Effect of light-curing method and indirect veneering materials on the Knoop hardness of a resin cement
This study evaluated the Knoop hardness of a dual-cured resin cement (Rely-X ARC) activated solely by chemical reaction (control group) or by chemical / physical mode, light-cured through a 1.5 mm thick ceramic (HeraCeram) or composite (Artglass) disc. Light curing was carried out using conventional halogen light (XL2500) for 40 s (QTH); light emitting diode
Brazilian Oral Research. Publicado em: 2009-06
-
23. Fabricação de malha de trama utilizada como pré-formas na indústria de compósitos e avaliação das propriedades mecânicas
In the manufacture of composite, textile materials are being used as reinforcement. Generally, the combination of the matrix with the textile material in the form of fibres or yarns is used depending on their distribution in the web. In the present work, in place of fibres or yarns, a knitted structure in the form of the final product which is defined as pre
Publicado em: 2009
-
24. DEVELOPMENT OF FLOW PROCEDURES INVOLVING SOLID-PHASE REACTOR AND ANALYTICAL MICROSYSTEM CONSTRUCTED WITH LTCC (LOW TEMPERATURE CO-FIRED CERAMICS) TO DETERMINATION OF ANALYTES OF PHARMACEUTICAL INTEREST / Desenvolvimento de procedimentos em fluxo envolvendo reatores em fase sólida e microssistema analítico construído com LTCC (Low Temperature Co-fired Ceramics) para a determinação de analitos de interesse farmacêutico
The employment of flow injection systems to determination of N-acetylcysteine, captopril, dipyrone and fluoxetine hydrochloride in pharmaceutical formulations was investigated. The N-acetylcysteine was determinated employing a solid-phase reactor containing Zn3(PO4)2 immobilized in a polyester resin coupled to a flow injection system. The procedure was based
Publicado em: 2009