Polyamide
Mostrando 1-12 de 168 artigos, teses e dissertações.
-
1. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
2. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
3. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
4. INCORPORAÇÃO DE RODAMINA B EM MEMBRANA DE POLIAMIDA PELO MÉTODO DA ADSORÇÃO
We have incorporated rhodamine into polyamide membranes by additive manufacture selective laser sintering technology. Incorporation into 0.5 cm2 membranes was conducted at different pH values and constant temperature of 25 oC. The amounts of incorporated dye were determined by a calibration curve, and analyses showed rhodamine incorporation in the order of 1
Quím. Nova. Publicado em: 2021-02
-
5. Temporal Evolution of Roughness Development on Polymer Surfaces Exposed to Non-Thermal Plasma
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
6. COVID-19, Sistema Renina-Angiotensina, Enzima Conversora da Angiotensina 2 e Nicotina: Qual a Inter-Relação?
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
7. APLICAÇÃO DA FLUIDODINÂMICA COMPUTACIONAL (CFD) E ANÁLISE DE ACELERANTES NA INVESTIGAÇÃO DE INCÊNDIO
Fire investigation is a complex activity that involves skill, technology, knowledge and science and aims to elucidate fire-related events such as cause, origin, propagation, phenomena, etc. Chemical analysis to verify the presence of foreign substances in that location, as well as the use of fire simulation software are efficient and economical ways to study
Quím. Nova. Publicado em: 2020-05
-
8. MODELLING ION TRANSPORT IN AN AMINE SOLUTION THROUGH A NANOFILTRATION MEMBRANE
Abstract The performance of a flat sheet polyamide nanofiltration membrane in rejection of a binary mixture of heat stable salts (acetate and sulfate) from methyl-diethanolamine (MDEA) solution was investigated. The effects of pressure and concentration of MDEA solution on rejection of acetate and sulfate ions were studied. At MDEA concentration of 20% wt. a
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
9. Plasma Treatment of Polyamide Fabric Surface by Hybrid Corona-Dielectric Barrier Discharge: Material Characterization and Dyeing/Washing Processes
In this study, the hybrid corona-dielectric barrier discharge plasma treatment was employed to modify the physical, chemical and morphological characteristics of a half-knitted fabric composed of 92% polyamide 6.6 and 8% elastane (PA). These properties of the fabric were evaluated by the water contact angle, x-ray diffraction, infrared spectroscopy, scanning
Mat. Res.. Publicado em: 28/11/2019
-
10. Injection Shrinkage аnd Water Sorption of Some Thermoplastic Dental Materials
Abstract Objective: To evaluate the change of diameter of different injection-molded thermoplastic materials. Material and Methods: Four thermoplastic injection-molded materials were analyzed (Bre.flex 2nd edition, Vertex ThermoSens, Perflex Biosens and Polyan IC). A total of 432 test samples were made in the form of an "hourglass". All samples were divide
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
11. Acetabular ventroversion using the sacroiliac wedge, with or without pelvic osteotomies in dogs: an ex vivo study
RESUMO: A displasia coxofemoral (DCF) é afecção comum na clínica cirúrgica de pequenos animais. Entre as técnicas cirúrgicas para controle da DCF, a osteotomia pélvica tripla (OPT) e a cunha sacroilíaca (CSI), promovem rotação lateral acetabular no eixo axial (ventroversão), aumentando a cobertura acetabular e a estabilidade da articulação. Des
Pesq. Vet. Bras.. Publicado em: 14/10/2019
-
12. PREPARATION AND CHARACTERIZATION OF THIN-FILM COMPOSITE REVERSE OSMOSIS MEMBRANE ON A NOVEL AMINOSILANE-MODIFIED POLYVINYL CHLORIDE SUPPORT
ABSTRACT Herein, the influence of pure and modified polyvinyl chloride (PVC) support layers on the performance of thin-film composite (TFC) membranes was investigated in water desalination. Accordingly, the PVC support was modified using (3-Aminopropyl) triethoxysilane (APTES) through bulk modification. The supports were synthesized at different doses of APT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019