Poly Vinylidene Fluoride
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Application of a composite ultrafiltration membrane for biodiesel purification
ABSTRACT This study was carried out to investigate the potentialities of the application of membrane technology in biodiesel purification without need of the decantation step. A new composite UF membrane was prepared from poly(vinylidene fluoride) casting solution (17 wt%) containing a sulfonated Carbon (20 wt%). The assays were performed in a dead-end filtr
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. EFFECT OF POLY (N- VINYPYRROLIDONE) ON THE NON-ISOTHERMAL CRYSTALLIZATION KINETICS AND VISCOELASTIC PROPERTIES OF PVDF FILMS
Abstract Poly(vinylidene fluoride) (PVDF) and PVDF blends with various molecular weights of poly (N- vinylpyrrolidone) (PVP) films were prepared in dimethyl formamide through the solution casting method. Non-isothermal melt crystallization studies of PVDF films were carried out by cooling the molten samples at different temperatures using differential scanni
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
3. P(VDF-TrFE)/ZrO2 Polymer-Composites for X-ray Shielding
Poly(vinylidene fluoride – tryfluorethylene) [P(VDF-TrFE)] copolymers were mixed with zirconia nanoparticles. The investigation was conducted with the intention to produce nanocompounds with potential to be used as protective patient shielding in radiological procedures. Polymer based nanocomposites with 1, 2, 3, 5 and 10 wt% of ZrO2 nanoparticles were pre
Mat. Res.. Publicado em: 26/02/2016
-
4. Clay nanoparticles effects on performance and morphology of poly(vinylidene fluoride) membranes
In this study, a comparison between neat poly(vinylidene fluoride) (PVDF) membrane and composite (PVDF-Nanoclay and PVDF-PVP-Nanoclay) membranes is presented. All membranes were synthesized by the phase inversion process, using 18% PVDF, n-methylpyrrolidone as solvent and water as the non-solvent. Demineralized water cross-flow permeation tests were conducte
Braz. J. Chem. Eng.. Publicado em: 2014-03
-
5. Correlation between morphological properties and ionic conductivity in an electrolyte based on poly(vinylidene fluoride) and poly (2-hydroxyethyl methacrylate)
Materials based on a mixture of poly(vinylidene fluoride) (PVDF), poly(2-hydroxyethyl methacrylate) (PHEMA) and LiClO4 were produced to evaluate their ionic behavior and morphological structure to determine if they can be used as an electrolyte in electrical devices. FTIR chemical analysis results indicated the presence of interactions between PVDF, PHEMA an
Mat. Res.. Publicado em: 27/09/2013
-
6. Síntese e caracterização de misturas poliméricas condutoras para aplicação em membranas biodegradáveis e dispositivos eletroluminescentes / Synthesis and characterization of conducting polymeric blends for use in biodegradable membranes and electroluminescent devices
The electrical properties of some conducting polymers and their blends have contributed to the technological advancement in various areas such as medicine and microelectronics. Recently, photochemical synthesis and spinner techniques have been using to prepare polymeric blends with good conducting properties. In this study we report the preparation of conduc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/08/2012
-
7. Sulfonation and characterization of styrene-indene copolymers for the development of proton conducting polymer membranes
The aim of this work is to obtain polymer precursors based on styrene copolymers with distinct degrees of sulfonation, as an alternative material for fuel cell membranes. Acetyl sulfate was used to carry out the sulfonation and the performance of the polyelectrolyte was evaluated based on the content of acid polar groups incorporated into the macromolecular
Polímeros. Publicado em: 30/10/2012
-
8. Effect of non-solvents used in the coagulation bath on morphology of PVDF membranes
The aim of this paper was to prepare a poly (vinylidene fluoride) (PVDF) membrane using different non-solvents in the coagulation bath for the phase inversion method. In order to increase the mechanical strength of membranes, facing the pressure of work, was used a macro-porous polyester support. The morphology and structure of the resulting membranes were e
Mat. Res.. Publicado em: 13/09/2012
-
9. Estudo da viabilidade para fabricação de fibra óptica polimérica (FOP) por extrusão vertical / Study of the feasibility on manufacturing polymeric optical fiber (POF) by vertical extrusion
Polymeric optical fibers (POF) presents some advantages compared to the glass optical fibers as flexibility, higher numerical aperture (NA), ease in handling and connecting due to their larger diameter and lower cost manufacturing and installation. However, due to their larger transmission losses compared to the main applications of glass fibers, POF are lim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011
-
10. Modificação de poli(fluoreto de vinilideno) induzida por radiação gama para aplicação como compósito ionomérico de metal-polímero / Poly(vinylidene fluoride) modification induced by gamma irradiation for application as ionic polymer-metal composite
Gamma-radiation-induced grafting of styrene into poly(vinylidene fluoride) (PVDF) films with 0.125 mm thickness at doses from 1 to 100 kGy in the presence of a styrene/N,N- dimethylformamide (DMF) solution (1:1, v/v) and styrene/toluene (1:1, v/v) at dose rate of 5 kGy h-1 was carried out by simultaneous method under nitrogen atmosphere at room temperature,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/07/2011
-
11. Thermal and mechanical properties of PVDF/PANI blends
Poly(vinylidene fluoride)/polyaniline blends of different composition were synthesized by chemical polymerization of aniline in a mixture of Poly(vinylidene fluoride) and N,N-dimethylformamide and their thermal and mechanical behavior was investigated as a function of the polyaniline doping level and the composition using thermogravimetric analysis, differen
Materials Research. Publicado em: 2010-12
-
12. Characterization of a microvalve using the piezoelectric polymer poly(viniyidene fluoride) (PVDF) integrated to a micronozzle end / Caracterização de uma microválvula fabricada usando o polímero piezoelétrico poli(fluoreto de vinilideno) (PVDF) integrada a saída de um microbocal sônico
This work describes the fabrication and test of a microvalve integrated in a micronozzle. The technique used to fabricate the micronozzles was powder blasting using aluminum oxide powder and glass as substrate. The microvalves are actuators made from PVDF (poli(vinylidene fluoride)), that is a piezoelectric polymer. The micronozzles have convergent-divergent
Publicado em: 2007