Poly Vinyl Chloride
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. FASE SENSORA DE POLI(CLORETO DE VINILA) NA DETECÇÃO DE 17β-ESTRADIOL EM MEIO AQUOSO UTILIZANDO ESPECTROSCOPIA NO INFRAVERMELHO MÉDIO E QUIMIOMETRIA
In recent years, estrogens have gained notable attention among emerging pollutants, increasingly leading to the need for less laborious analytical methods. Optical sensors are a promising technology for the determination of chemical contaminants in water, acting as an alternative screening method. The aim of this work was to evaluate the performance of poly(
Quím. Nova. Publicado em: 2020-09
-
2. Single-Walled Carbon Nanotubes/Poly Vinyl Chloride Nanocomposites and its Properties
ABSTRACT The SWNTs was purified/functionalized by acid treatment method and the F-SWNTs were used as reinforcing materials. The acid treatment introduced carboxyl (–COOH) group to the SWNTs. The PVC and F-SWNTs/PVC films were prepared by solution casting method. The fractured surfaces of sample was analyzed through SEM and showed the dispersion of F-SWNTs
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Effect of The Incorporation of Micro and Nanoparticles of Calcium Carbonate in Poly (Vinyl Chloride) Matrix for Industrial Application
This study aimed at evaluating the effects of the incorporation of micro and nanoparticles of CaCO3 on the properties of poly(vinyl chloride) (PVC), intended to industrial application. The PVC compounds added with particles of different sizes were achieved in an intensive mixer. Rheological, microstructural, mechanical and thermal properties of the compounds
Mat. Res.. Publicado em: 14/10/2019
-
4. Thermal, dielectric and catalytic behavior of palladium doped PVC films
Abstract The present paper discusses the aspects of synthesizing palladium (Pd) doped (Pd+2 and Pd0) poly(vinyl chloride) (PVC) using simple solution cast technique. The Pd loading to PVC was altered from 2.5% to 10.0% and the material properties were studied using UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscop
Polímeros. Publicado em: 04/07/2019
-
5. Presence of iron in polymers extruded with corrosive contaminants or abrasive fillers
Abstract Off-site measurements of the dimensions of extruder screws are used to monitor their wear. This wear causes the presence of metals in the processed polymer. We detected the presence of iron in polymers processed with corrosive contaminants or abrasive fillers. To this end we processed poly(ethylene terephthalate), PET, pure or contaminated with poly
Polímeros. Publicado em: 10/06/2019
-
6. Bonding properties and crystallization kinetics of thermoplastic polyurethane adhesive
ABSTRACT The advantages of heterophasic thermoplastic polyurethanes (TPUs), such as their phase behavior and mechanical properties, make these materials an important class of adhesives. Whereas the amorphous phase contributes to good adhesion properties, the crystalline phase is responsible for the cohesive force of TPU adhesives. This work investigates the
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. A Novel Sensitive Bulk Optode Based on 5-Br Salophen as an Ionophore for Determination of Zinc Ion in Real Samples
An optical sensing film was fabricated for sensitive determination of zinc ion in aqueous solutions. The optical sensor was prepared by synthesized ionophore, 5-Br salophen, dioctyl sebacate (DOS) as a plasticizer, sodium tetraphenyl borate (NaTPB) as a lipophilic anionic additive in a poly(vinyl chloride) membrane. The optode response is based on the cation
J. Braz. Chem. Soc.. Publicado em: 2018-03
-
8. ZnS Nanocrystals as an Additive for Gamma-Irradiated Poly (Vinyl Chloride)
Zinc sulfide (ZnS) was synthesized by sonochemical method and nanoparticles with crystallite size around 2 nm were obtained. PVC containing ZnS nanoparticles at concentrations of 0.10; 0.30; 0.50; 0.7 and 1.00 wt% were gamma irradiated (60Co) at room temperature in air. No appreciable decrease in PVC Viscosity-Average Molar Mass (Mv) was observed for samples
Mat. Res.. Publicado em: 01/02/2018
-
9. Study of Coffee Grounds Oil Action in PVC Matrix Exposed to Gamma Radiation: Comparison of Systems in Film and Specimen Forms
The poly (vinyl chloride), PVC, undergoes changes in its physicochemical properties when it is exposed to gamma radiation. Thus, the radiolytic stabilization of PVC is one way for obtain a material with radiation resistance. In this work, we studied the coffee grounds oil as PVC radiolytic protection in two systems forms: PVC film and PVC specimen. The syste
Mat. Res.. Publicado em: 18/12/2017
-
10. Thermal and mechanical properties of bio-based plasticizers mixtures on poly (vinyl chloride)
Abstract The use of mixtures of nontoxic and biodegradable plasticizers coming from natural resources is a good way to replace conventional phthalates plasticizers. In this study, two secondary plasticizers of epoxidized sunflower oil (ESO) and epoxidized sunflower oil methyl ester (ESOME) were synthesized and have been used with two commercially available b
Polímeros. Publicado em: 21/09/2017
-
11. Structural, Thermal and Optical Properties of Pure and Mn2+ Doped Poly(Vinyl Chloride) Films
Pure and Mn2+ doped poly(vinyl chloride) (PVC) polymer films were prepared using the solution cast technique. The prepared samples have been characterized by X-ray diffraction (XRD), UV-Vis Spectroscopy (UV-Vis), Fourier transform infrared (FTIR) Spectroscopy, Thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Electron Paramagnetic Re
Mat. Res.. Publicado em: 19/09/2016
-
12. Biodegradation of films of low density polyethylene (LDPE), poly(hydroxibutyrate-co-valerate) (PHBV), and LDPE/PHBV (70/30) blend with Paecilomyces variotii
The increased consumption of plastics in the world has been a subject of great concern and special attention by the scientific community. The aim is to promote development of materials that are biodegradable in a shorter time upon disposal in the environment. The most used synthetic plastics are difficult to biodegrade because they are made of long hydrocarb
Polímeros. Publicado em: 2015-02