Polarization Microscopy
Mostrando 13-24 de 175 artigos, teses e dissertações.
-
13. Glycerol Effect on the Corrosion Resistance and Electrodeposition Conditions in a Zinc Electroplating Process
Zinc electrodeposition is an economical process of Zn coating compared to conventional galvanic process. The galvanizing process is used in various industrial sectors to protect ferrous alloys during the corrosion process. In buildings, the galvanizing process is widely used to coat mortar protective screens. The electrodeposition of zinc has a relatively lo
Mat. Res.. Publicado em: 19/08/2019
-
14. Microbiologically-Influenced Corrosion of 1020 Carbon Steel in Artificial Seawater Using Garlic Oil as Natural Biocide
This work aims evaluate the use of biocides in the microbiologically-influenced corrosion (MIC) of AISI 1020 carbon steel by sulfate-reducing bacteria (SRB) in artificial seawater. A natural biocide (garlic oil) and a commercial biocide (glutaraldehyde) were used to control the corrosion caused by these bacteria in artificial seawater. Microbial growth on th
Mat. Res.. Publicado em: 30/05/2019
-
15. Uso de técnicas electroquímicas para determinar la resistencia a la corrosión localizada de un acero inoxidable súper dúplex UNS S-32760
ABSTRACT Super duplex stainless steel UNS S-32760 is one of the most commonly used alloys in several industrial applications, due to its high corrosion resistance. However, this characteristic is affected when the alloy is exposed to aggressive environments. In this work, the effect of temperature on the critical potential of super duplex stainless steel was
Matéria (Rio J.). Publicado em: 20/05/2019
-
16. Avaliação Microestrutural e Resistência à Corrosão de uma Junta Dissimilar entre um Aço de Alta Resistência e Baixa Liga e Aço um Inoxidável Duplex
Resumo A união entre materiais dissimilares tem sido amplamente aplicada na indústria de petróleo e gás. Em geral, este tipo de soldagem é mais sensível às diferenças de composição química existente entre os metais envolvidos. Diante dessa perspectiva, este trabalho tem por objetivo avaliar, por união autógena, a microestrutura de uma junta sold
Soldag. insp.. Publicado em: 16/05/2019
-
17. Effect of Sn Addition in the Microstructure Refinement and Corrosion Resistance of Cu-Zr-Al-Ag Alloy
In this paper, a composition of known high glass-forming ability, Cu42Zr42Al8Ag8 and a novel Cu42Zr42Al8Ag4Sn4, were produced by suction-casting. After rapid solidification of both alloys, X-ray diffraction patterns along with crystallite size estimation by Scherrer equation and scanning electron microscopy images revealed a refined microstructure, composed
Mat. Res.. Publicado em: 04/04/2019
-
18. Barley Agro-industrial Residues as Corrosion Inhibitor for Mild Steel in 1mol L-1HCl Solution
The corrosion inhibition of mild steel in 1 mol L−1HCl by barley grains and malting process residue extracts was investigated by weight loss measurements, polarization curves, electrochemical impedance measurements and scanning electron microscopy. The inhibition efficiency exceeded 92% in the presence of 100 mg L−1 extracts after 24 h immersion time for
Mat. Res.. Publicado em: 01/04/2019
-
19. Anatomy, histochemistry and oxalic acid content of the leaflets of Averrhoa bilimbi and Averrhoa carambola
Abstract Averrhoa bilimbi L. and A. carambola L., Oxalidaceae, are the only two species of the genus Averrhoa L. Their leaves are widely used in folk medicine as an adjuvant in the treatment of diabetes. Some species may contain, for example, calcium oxalate crystals, which may lead to risk in its use when there is predisposition of individuals with reduced
Rev. bras. farmacogn.. Publicado em: 2019-02
-
20. A Comparative Investigation of the Corrosion Resistance and HIC Suceptibility of API 5L X65 and API 5L X80 Steels
High strength low alloy (HSLA) steels are used for the construction of pipelines for oil and natural gas transportation. For such applications pipelines must exhibit mechanical resistance and resistance to corrosion and hydrogen induced cracking (HIC). API 5L X65 steels are the main materials used for this purpose. However, for economic reasons, the use of s
Mat. Res.. Publicado em: 07/01/2019
-
21. Effect of Aging Heat Treatment H950 and H1000 on Mechanical and Pitting Corrosion Properties of UNS S46500 Stainless Steel
The effect of aging temperature on mechanical and pitting corrosion properties of UNS S46500 was investigated. Tensile and Hardness tests were carried out and the microstructure was analyzed by optical microscopy, scanning electron microscopy and X-ray diffraction; Thermo-Calc simulations helped in the phase identification. Pitting corrosion properties were
Mat. Res.. Publicado em: 08/11/2018
-
22. Anticorrosive Effect of PVP 40000 Against AISI 1020 Carbon Steel in HCl
Polymers have received considerable attention for replacing synthetic inorganic and organic anti-corrosion inhibitors since they are not as toxic for the environment, besides being cheaper. Polyvinylpyrrolidone (PVP) has been studied due to its applicability, solubility, very low toxicity, cost and efficiency in corrosion inhibition against metals, such as z
Mat. Res.. Publicado em: 29/10/2018
-
23. Enhancement of Pitting Corrosion Resistance of Austenitic Stainless Steel Through Deposition of Amorphous/Nanocrystalline Oxy-nitrided Phases by Active Screen Plasma Treatment
In this research, AISI 304 austenitic stainless steels were efficient treatment using active screen plasma oxy-nitriding technique. The modified layers were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopes, and atomic force microscopy. In addition, the pitting corrosion resi
Mat. Res.. Publicado em: 29/10/2018
-
24. Efecto de la composición sobre el comportamiento frente a la corrosión de aceros inoxidables austeníticos y martensíticos
ABSTRACT The aim of this work is to study the electrochemical behavior of a series of stainless steels in NaCl solution (10000 ppm Cl-) at room temperature. Considering the differences in structures (austenitic and martensitic) and the composition of alloys, a relationship between their electrochemical behavior and PREN (Pitting resistance equivalent number)
Matéria (Rio J.). Publicado em: 19/07/2018