Plaster
Mostrando 1-12 de 130 artigos, teses e dissertações.
-
1. Mesh reinforcement in masonry mortar coatings: a systematic literature review
Abstract Mortar coatings have a major influence on a building’s aesthetics, valorization, and habitability, with significant effects on the mechanical behavior of masonry walls. Multiple types of meshes can be embedded in plaster to enhance both masonry and coating’s mechanical behavior, restrain crack formation, enhance the bonding between layers, and i
Cerâmica. Publicado em: 2023
-
2. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
3. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
4. ASPECTOS QUÍMICOS NA INVESTIGAÇÃO DE ALGUNS TIPOS DE EFLORESCÊNCIAS EM BENS CULTURAIS
The preservation of Cultural Heritage is undoubtedly important for the society, and Conservation Science must dedicate itself to attempts to minimize the inherent processes of degradation to which cultural assets are susceptible. In this context, the evaluation of the chemical aspects of the composition of the objects and their relation with the environment
Quím. Nova. Publicado em: 05/12/2019
-
5. DISPARITY IN THE GROSS PRODUCTION VALUE OF NATIVE WOOD PRODUCTS OF THE PARAÍBA MESOREGIONS, BRAZIL (1994-2017)
RESUMO Este artigo analisou a disparidade do valor bruto de produção dos produtos madeireiros do extrativismo vegetal das mesorregiões da Paraíba, Brasil, no período de 1994 a 2017. Os indicadores empregados foram: o quociente locacional (QL), o coeficiente locacional (CL), o coeficiente de redistribuição (CRED), o coeficiente de associação geográf
Rev. Árvore. Publicado em: 25/11/2019
-
6. Caracterização mecânica do gesso para revestimento produzido no Polo Gesseiro do Araripe
Resumo O gesso é um material de grande uso na construção civil, destacando-se seu emprego como pasta de gesso para revestimento. No Brasil, o Polo Gesseiro do Araripe é o maior produtor. Percebe-se a necessidade de conhecimento das propriedades e características desse material, principalmente, com foco no produto acabado como revestimento interno em par
Ambient. constr.. Publicado em: 03/10/2019
-
7. Comparison of the Accuracy of Digital Radiography with Conventional Radiography and Visual Examination in the Detection of Permanent Teeth Interproximal Caries
Abstract Objective: To compared the accuracy of digital radiography in the diagnosis of interproximal caries in permanent teeth with conventional radiography and visual examination. Material and Methods: In this descriptive-analytical study, 78 human premolars, which seem normal in primary examination, are mounted on the plaster in a pair-wise manner and t
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 02/09/2019
-
8. Stability Analysis of Bitemarks in Different Conditions of Time and Temperature and Its Reliability as Evidence in Criminal Investigations
Resumo O objetivo deste estudo foi avaliar a estabilidade das marcas de mordida em alimentos em diferentes condições de tempo e temperatura e sua confiabilidade como evidência em investigações criminais. A amostragem foi composta por 20 indivíduos, que foram instruídos a morder cinco pedaços de queijo e cinco pedaços de chocolate. As mordidas foram
Braz. Dent. J.. Publicado em: 03/06/2019
-
9. Superimposition of 3D maxillary digital models using open-source software
Resumo Historicamente, a avaliação ortodôntica da movimentação dentária, seja com finalidade de pesquisa, seja para monitoramento clínico, tem sido feita por meio de modelos de estudo em gesso e radiografias em duas dimensões (2D). Entretanto, com o desenvolvimento da Ortodontia digital, novas fronteiras para o diagnóstico, planejamento e avaliaçã
Dental Press J. Orthod.. Publicado em: 20/05/2019
-
10. Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
Resumo A indústria da construção civil, grande influenciadora no desenvolvimento econômico e social do país, é responsável por um grande consumo de matéria prima e produção de resíduos. O gesso, em especial, apresenta crescimento expressivo, sobretudo na região Nordeste, devido ao Pólo Gesseiro do Araripe. Considerando os graves problemas de seu
Ambient. constr.. Publicado em: 2019-04
-
11. Recycled gypsum block: development and performance
Resumo O resíduo de gesso ainda é considerado um grave problema econômico e ambiental. Seu volume é alto e sua destinação é muitas vezes inadequada. Visando fornecer uma alternativa mitigatória, esta pesquisa pretende desenvolver blocos que incorporem o resíduo industrial de gesso a partir da logística reversa. Para isso foi realizado um processo d
Ambient. constr.. Publicado em: 2019-04
-
12. Utilização da termografia infravermelha para detecção de focos de umidade em paredes internas de edificações
Resumo O uso da termografia infravermelha tem se tornado alvo de estudos em várias áreas dentro da construção civil. Contudo, as pesquisas de detecção de presença de umidade em edificações ainda estão em desenvolvimento. O objetivo principal deste artigofoi estudar a viabilidadedo uso da termografia para a detecção de infiltrações devido a caus
Ambient. constr.. Publicado em: 2019-03