Plasma Welding
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
2. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
3. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Evaluation of Residual Stresses and Mechanical Properties of IF Steel Welded Joints by Laser and Plasma Processes
Interstitial free (IF) steel has an extensive application in the automotive industry where the Laser Beam Welding (LBW) process is widely used due to its high productivity. Similarly, the other used process, Plasma Arc Welding (PAW), is characterized by a greater energy concentration and current density and therefore lower distortion, higher welding speeds a
Mat. Res.. Publicado em: 29/04/2016
-
5. Development of a Powder-feed Device and Procedures for the Application of an Experimental Alloy in Overhead PTA-P Welding
Abstract: When they are damaged by cavitation, hydroelectric power plant turbine blades must be repaired using operations that could benefit from developments in welding technologies. In light of this, the LABSOLDA welding laboratory at the Federal University of Santa Catarina is making efforts to enhance the flexibility and robustness of the powder-fed plas
Soldag. insp.. Publicado em: 2015-12
-
6. Energía de ionización simple en la soldadura con electrodo revestido
The objective of the present work is to present to the international scientific community the conception of an estimation method of the simple ionization energy, indispensable for the establishment of the thermal plasma needed for covered electrode welding. Starting from the synthesis and the analysis of experimental and theoretical results established in th
Soldag. insp.. Publicado em: 2013-03
-
7. Mechanical strength and analysis of fracture of titanium joining submitted to laser and tig welding
This study compared the tensile strength and fracture mechanism of tungsten inert gas (TIG) welds in cylindrical rods of commercially pure titanium (cp Ti) with those of laser welds and intact samples. Thirty dumbbell-shaped samples were developed by using brass rods as patterns. The samples were invested in casings, subjected to thermal cycles, and position
Mat. Res.. Publicado em: 09/10/2012
-
8. Effect of current and atomized grain size distribution on the solidification of Plasma Transferred Arc coatings
Plasma Transferred Arc (PTA) is the only thermal spray process that results in a metallurgical bond, being frequently described as a hardfacing process. The superior properties of coatings have been related to the fine microstructures obtained, which are finer than those processed under similar heat input with welding techniques using wire feedstock. This ob
Mat. Res.. Publicado em: 16/08/2012
-
9. Application of design of experiments to plasma Arc Welding Process: a review
Design of Experiment commonly referred to as DOE is one of the extensively used methods for experimental study of many manufacturing processes in engineering. DOE is a statistical approach in which a mathematical model is developed through experimental runs. DOE predicts possible output based on the input parameters of the experimental setup. In the present
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-03
-
10. Effect of plasma welding parameters on the flexural strength of ti-6al-4v alloy
O objetivo deste estudo foi avaliar o efeito de diferentes parâmetros de solda a plasma verificando a resistência flexural de barras de liga de titânio (Ti-6Al-4V). Quarenta espécimes de Ti-6AL-4V e dez espécimes de liga de NiCr foram preparados (40 mm de altura e 3,18 mm de diâmetro) e divididos em 5 grupos (n=10). As barras de liga titânio do grupo
Braz. Dent. J.. Publicado em: 2012
-
11. Avaliação da resistência a flexão de ligas de Titânio (Ti6Al4V) soldadas com diferentes configurações pelo processo Plasma
Este trabalho teve por objetivo avaliar o comportamento mecânico de barras de Ti-6Al- 4V de 3,18mm de diâmetro soldadas em diferentes regulagens, para determinar os parâmetros ótimos na utilização da máquina de solda plasma e compará-los com corpos de prova de níquel cromo (NiCr) soldados pelo processo de brasagem. Os 50 corpos de prova (n=10) foram
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/02/2011
-
12. Soldadura de aceros dual phase en chapa fina: GMAW, PAW y RSW
Dual Phase steels (DP) have been used recently as an interesting option for structural elements, specialy in automotive industry, due to weight reduce requirements. Welding of these materials becomes particularly important considering their application as structural elements and the related manufacturing methods. In particular resistance spot welding (RSW) a
Soldagem & Inspeção. Publicado em: 2011-06