Photonic Crystal Fiber
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. Optical Fiber Coupler Analysis Using Daubechies Wavelets
Abstract This article presents the theoretical analysis of a signal coupling between a proposed Photonic Crystal Fiber (PCF) and a Conventional Fiber with Step Index (CFSI) system. In this analysis, the Finite Element Method (FEM) and Beam Propagation Method (BPM) are applied together with Daubechies wavelets as basis function and described in the mathematic
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
2. Highly birefringent do-octagonal photonic crystal fibers with ultra flattened zero dispersion for supercontinuum generation
Abstract Photonic crystal fiber (PCF) structures with do-octagonal geometry have been studied. These do-octagonal PCF structure have smaller circular holes arranged in rhombic fashion at its centre. Moreover, these small holes are doped with materials like butanol, ethanol, methanol and propanol. Do-octagonal PCF structures doped with methanol and air filled
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
3. Directional Coupler Based on a Photonic Quasi-Crystal Fiber with Extended Cores
Abstract In this paper, an optical coupler composed by a photonic quasi-crystal fiber (PQCF) with two cores is proposed. The structure is obtained by immersion of a quasi-periodic arrangement of air holes replicated twelve-fold in a conventional fiber optical constituted of pure silica. The cores are generated from defects caused due to absence of two air ho
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
4. Design and Modal Analysis of Photonic Crystal Fiber for Dispersion Compensation over Broadband Range
Abstract In this paper we have presented the four new investigations using different structures of Photonic Crystal Fiber (PCF) for broadband communication applications and narrows down on the design which can provide largest flat negative dispersion. The new structure model is optimized based on the combination of modal properties and dispersion compensatio
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-12
-
5. A new circular photonic crystal fiber for effective dispersion compensation over E to L wavelength bands
This paper presents a new circular photonic crystal fiber (C-PCF) for effective dispersion compensation covering E to L wavelength bands ranging from 1360-1625 nm. To investigate its guiding properties, finite element method (FEM) with a perfectly matched layer absorbing boundary condition is used. From our numerical simulation, it is found that the designed
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
6. Dispositivos baseados no preenchimento de fibras de cristal fotônico por líquidos e materiais nanoestruturados / Devices based on the filling of photonic crystal fibers by liquids and nanostructured materials
Esta tese descreve a demonstração experimental de dispositivos baseados em fibras de cristal fotônico (PCFs), que aproveitam a flexibilidade estrutural oferecida pela matriz de capilares que compõe a seção reta da fibra, de forma a preencher estes capilares com líquidos e materiais nanoestruturados. Para o caso de materiais nanoestruturados, uma vez p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/04/2012
-
7. Acopladores de cristais fotÃnicos e acesso mÃltiplo por divisÃo de cÃdigo Ãptico (OCDMA) com pulsos ultracurtos em fibras de Bragg / Photonic crystals couplers and optical code division multiple access (OCDMA) with optical ultra-short pulses in linear fiber Bragg gratings
This paper presents numerical simulation studies of propagation/switching of ultra-short pulses in photonic crystal couplers and Optical Code Division Multiple Access (OCDMA) using Fiber Bragg Grating (FBG). For coding were obtained analytically Gold codes. In the analysis of photonic crystal couplers (microstructured) investigated the properties of the prop
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/02/2012
-
8. Técnicas de pós-processamento em fibras de cristal fotônico
Nesse trabalho são descritas duas técnicas de pós-processamento em fibras de cristal fotônico (PCFs, do inglês Photonic Crystal Fibers) desenvolvidas para alterar suas propriedades de guiamento. A primeira consiste em fechar seletivamente buracos da microestrutura das PCF possibilitando assim, entre outras coisas, o preenchimento de alguns buracos com m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/01/2011
-
9. Comparative study of fundamental properties of honey comb photonic crystal fiber at 1.55µm wavelength
Fundamental properties such as mode field distribution, real effective refractive index, imaginary effective refractive index, confinement loss of two new kinds of honeycomb photonic crystal fibers are successfully studied by using Full-Vectorial Finite element method (FV-FEM). Low confinement loss 0.1×10-4dB/km is achieved at wavelength 1.55µm in hollow c
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-12
-
10. Polarization maintaining highly birefringent small mode area photonic crystal fiber at telecommunication window
In this paper a highly polarization maintaining birefringent photonic crystal fiber at telecommunication window is reported via Full-Vectorial Finite Element Method (FV-FEM). By taking triangular lattice of three ring hexagonal structure PCF with suitable designing parameters such as symmetrical elliptical hole along radial axis of ellipticity a/b=5µm, air
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-06
-
11. Applicability of low macrobending loss hollow-core PCF to FTTH applications
Fiber-To-The-Home (FTTH) technology has been significantly implemented in access networks, providing very high data rates transmission and a variety of digital content to subscribers. It involves an optical cable link being installed between the building entry point and each subscriber with the Multiple Dwelling Units (MDUs), i.e. flats and apartments. In ot
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-06
-
12. Modelagem por elementos finitos de dispositivos fotônicos e de RF / Finite element modeling of photonic and RF devices
Esta dissertação aborda a modelagem e análise de Dispositivos Fotônicos e de RF via códigos home-made e comerciais baseados no método dos elementos finitos (MEF) e, em alguns casos, resolução de problemas inversos com auxílio de AG. Primeiramente é feita uma breve revisão sobre elementos finitos e AG, bem como alguns fenômenos eletromagnéticos v
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/06/2010