Photocatalysis
Mostrando 13-24 de 120 artigos, teses e dissertações.
-
13. Solvothermal Synthesis of Cerium-Doped Titania Nanostructured Materials Modified with Acetylacetone for Solar-Driven Photocatalysis
This study reports the preparation of nanostructured cerium-doped titanium dioxide photocatalysts containing different cerium concentrations by a modified sol-gel route involving the use of acetylacetone. The nanocrystalline powders had their structural, morphological, and optical properties characterized by X-ray diffraction, vibrational and Raman spectrosc
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
14. Photodegradation study of TiO2 and ZnO in suspension using miniaturized tests
ABSTRACT Miniaturization has been a trend in the instrumentation of chemical analyzes. The interest in miniaturization stems from the perceived benefits of faster, easier, less expensive and less wasteful analyzes than the tradition analyses. Thus, this work proposes a miniaturization of photocatalytic tests using a microplate reader for the analysis of seve
Matéria (Rio J.). Publicado em: 25/11/2019
-
15. Interplay between Near-Field Properties and Au Nanorod Cluster Structure: Extending Hot Spots for Surface-Enhanced Raman Scattering
Materials science has observed a continuous increase in the use of metal nanoparticles in a wide range of studies, from fundamental physics to technological applications such as photocatalysis and optical communication devices. This broad scope has the same fundamental origin, the localized surface plasmons, whose excitation leads to strong light confinement
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
16. REMOVAL OF TRIBUTYL PHOSPHATE FROM AQUEOUS SOLUTIONS BY TiO2 HETEROGENEOUS PHOTOCATALYSIS SUPPORTED OVER A NEW METAL PLATE WITH KINETIC STUDY
Abstract The aim of this investigation was to study the degradation of tributyl phosphate (TBP) in aqueous solution by heterogeneous photocatalysis (UV-C/TiO2). To perform the investigation, aqueous solutions containing the contaminant were exposed to UV radiation in the absence or presence of TiO2 in suspension or supported on a Fe-Cr metal alloy plate. TBP
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
17. CHARACTERIZATION-PERFORMANCE OF ZnO AND ZnO/ZnFe2O4 CATALYST USING ARTIFICIAL AND SOLAR LIGHT FOR MERCURY (II) REDUCTION
Abstract This study describes the application of ZnO commercial oxide and ZnO/ZnFe2O4 mixed oxides to reduce the mercury ion (Hg2+) in the aqueous phase. The catalysts synthesized were characterized by thermogravimetric analysis, adsorption and desorption of N2, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, photoac
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
18. APPLICATION OF POLYCARBOXYLIC ACIDS AS BINDERS FOR TiO2 IMMOBILIZATION ON COTTON TEXTILES
ABSTRACT Immobilizing the photocatalyst on a support is an alternative solution to a critical issue in photocatalysis, which is the need for unit operations to remove the photocatalyst from the effluent. In this work, TiO2 was immobilized onto a cotton textile substrate by polycarboxylic acid binders (succinic and citric acids) using a solution deposition me
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
19. Advanced Oxidation Processes to the Remediation of Liquid Residue from the Thermal Treatment of Oily Sludge
This work reports the remediation of a liquid residue derived from the thermal treatment of petrochemical residues by advanced oxidation processes. Firstly, degradation studies of phenol aqueous solutions by heterogeneous photocatalysis, Fenton, and photo-Fenton were conducted. Fenton processes showed a higher efficiency, mainly in the UVA photo-assisted mod
J. Braz. Chem. Soc.. Publicado em: 04/07/2019
-
20. CaTiO3 Perovskite in the Photocatalysis of Textile Wastewater
Resumo O material CaTiO3 do tipo perovskita foi sintetizado pelo método dos precursores poliméricos e caracterizado. Os parâmetros da reação fotocatalítica foram otimizados pela metodologia de análise de superfície de resposta na degradação do azul de metileno sob radiação UV. Após a otimização, as águas residuais têxteis e de curtume foram
Rev. Ambient. Água. Publicado em: 03/06/2019
-
21. Study of the structural and morphological properties of copper catalysts supported on Al2O3 and TiO2 synthesized by the impregnation method
ABSTRACT Aluminum oxide and titanium oxide are widely used as catalytic support. Due to their characteristics and properties, they have several applications such as chemical processes, photocatalysis and pollution control. In this work, the catalytic supports of Al2O3 and TiO2 were impregnated with 2% of copper oxide by the method of impregnation. The cataly
Matéria (Rio J.). Publicado em: 20/05/2019
-
22. FOTOCATÁLISE MEDIADA POR TiO2 NO ESTADO NANOPARTICULADO: REVISÃO DA REATIVIDADE PELO CONCEITO DE TRAPS E ALGUMAS APLICAÇÕES EM QUÍMICA ANALÍTICA
TiO2 has been used as a white pigment and studied since the first decades of the XX century for the undesirable chalking of outdoor paintings exposed to sunlight. Since the first report of Honda and Fujishima (1972) of the water splitting by the harvesting of sunlight on a n-type single crystal TiO2 electrode, the engagement of researchers with the field has
Quím. Nova. Publicado em: 02/05/2019
-
23. Photodegradation of Rhodamine B catalyzed by ZnO pellets
Abstract This paper describes the development of ZnO semiconductors applied as photocatalysts for the degradation of water contaminants, with the shape of ceramic pellets thick enough to maintain their structures, prepared by slip casting and sintering. The samples presented porosities around 40% and densities around 3.4 g/cm3, which represented about 61% of
Cerâmica. Publicado em: 2019-01
-
24. Recubrimientos porosos de dióxido de titanio sintetizados por oxidación anódica
ABSTRACT Titanium dioxide is one of the most used materials in heterogeneous photocatalysis due to its commercial availability, low cost, chemical stability, low toxicity and high photocatalytic activity. One of the most efficient and economical methods to obtain TiO2 coatings is the plasma electrolytic oxidation. In this anodization process, a direct curren
Matéria (Rio J.). Publicado em: 19/07/2018