Phenol Formaldehyde
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Extraction and evaluation of tannin from green coconut mesocarp
RESUMO O desenvolvimento de alternativas para o aproveitamento da casca de coco possibilita a redução da disposição inadequada de resíduos sólidos e proporciona uma nova opção de rendimento junto aos locais de produção. O presente trabalho tem como objetivo avaliar o potencial de extração de taninos do mesocarpo de coco verde e sua capacidade ade
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
ABSTRACT The present study has the objective of evaluating the physical-mechanical properties of plywood produced with Acrocarpus fraxinifolius wood, as well as the effect of combining their veneer with Pinus veneer. The wood of Acrocarpus fraxinifolius and Pinus oocarpa were used in the production of the panels. The plywood was produced with five veneers; t
Floresta Ambient.. Publicado em: 05/09/2019
-
3. Production of Structural Particleboard of Mimosa Scabrella Benth With Lignin Phenol-formaldehyde Resin
RESUMO O objetivo do trabalho foi avaliar a viabilidade de uso da resina lignina-fenol-formaldeído na produção de painel aglomerado estrutural de Mimosa scabrella Benth (bracatinga). Os painéis foram produzidos com massa específica nominal de 750 kg.m-3 e 950 kg.m-3, 10 e 12% de resina fenol-formaldeído e lignina-fenol-formaldeído, e 10 e 12 minutos d
Floresta Ambient.. Publicado em: 30/05/2019
-
4. PARTICLEBOARD PRODUCTION WITH RESIDUES FROM MECHANICAL PROCESSING OF AMAZONIAN WOODS
RESUMO A falta de aproveitamento dos resíduos gerados pelo processamento mecânico da madeira e seu descarte inadequado são desafios para a indústria madeireira. Esses poderiam ser utilizados em produtos de maior valor agregado. O objetivo deste trabalho foi avaliar a utilização de resíduos gerados pelo processamento mecânico das madeiras amazônicas
Rev. Árvore. Publicado em: 20/05/2019
-
5. Evaluating the Effects of Removing Fines from Particleboards Manufactured from Amazonian Wood Residue
ABSTRACT The aim of this research was to evaluate the effects of removing fines on the physical and mechanical properties of high-density particleboard produced by mechanical processing of Caryocar villosum (pequiá), Tachigali myrmecophyla (tachi-preto) and Hymenolobium excelsum (angelim-da-mata) Amazonian woods. The panels were produced with nominal densi
Floresta Ambient.. Publicado em: 26/07/2018
-
6. Combined effect of thermoplastic and thermosetting adhesives on properties of particleboard with rice husk core
This study investigated the combined effect of adhesive type and content on the dimensional stability and mechanical properties of three-layer particleboards made from a mixture of wood particles (face layer: 30 wt %) and rice husk particles (core layer: 70 wt %). Two types of thermosetting adhesives, liquid urea-formaldehyde (UF) and phenol-formaldehyde (PF
Mat. Res.. Publicado em: 09/09/2014
-
7. Síntese e caracterização de nanocompósitos de fenol-formaldeído reforçados com argila montmorilonita / Synthesis and characterization of phenol-formaldehyde nanocomposites reinforced with montmorillonite clay
Ao contrário de muitos polímeros, as resinas fenólicas se caracterizam por possuir um grande número de aplicações por conta de sua superior resistência ao fogo e baixa emissão de fumos e ao seu excelente nível de resistência térmica e química, além de seu baixo custo. No entanto, devido à sua estrutura tridimensional, caracterizada pelo alto gr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/10/2010
-
8. Synthesis of a boron modified phenolic resin
Abstract: Phenolic resin has long been used as matrix for composites mainly because of its flame retardant behavior and high char yield after pyrolysis, which results in a self supporting structure. The addition of ceramic powders, such as SiC and B4C, as fillers to the phenolic resin, results in better thermo-oxidative stability, but as drawbacks, it has po
J. Aerosp. Technol. Manag.. Publicado em: 2010-08
-
9. Biocomposites of lignin-, tannin- and glyoxal- based polymeric matrices reinforced with natural fibers / Biocompósitos a partir de matrizes poliméricas baseadas em lignina, tanino e glioxal reforçadas com fibras naturais
The present study aimed at developing biocomposites combining polymeric matrices and reinforcement agents, employing the highest possible proportion of materials obtained from natural sources. Phenolic resins are widely known and used due to their excellent properties, such as dimensional and thermal stability, flame resistance and chemical resistance. Howev
Publicado em: 2010
-
10. Desenvolvimento de um novo material de pastilhas de freio baseado na substituição de resina fenol-formaldeído por lignosulfonato / Development of a new material for brake pads based in the replacement of phenol-formaldehyde resin by lignosulfonate
As pastilhas de freio são materiais compósitos que têm sido constantemente aperfeiçoadas, principalmente pela substituição por materiais que melhorem o desempenho destes elementos ou diminuam os impactos ao homem e ao meio ambiente. Com a procura de materiais de fontes renováveis para substituir materiais sintéticos, a lignina, uma macromolécula nat
Publicado em: 2010
-
11. Potential of Australian Cedar wood (Toona ciliata M. Roem var. australis) for the manufacturing of greater added value products / Potencial da madeira de Cedro Australiano (Toona ciliata M. Roem var. australis) na manufatura de produtos de maior valor agregado
The objective of this work was to study the potential of 4 and 18 years old wood of Australian Cedar (Toona ciliata) for the production of plywood, OSB, particleboard and cement-wood panels. The woods from four different places were compared: Campo Belo, Cana Verde, Santo Antônio do Amparo and Marechal Floriano. Plywood panels containing 5 veneers were prod
Publicado em: 2009
-
12. INFLUÊNCIA DE DIFERENTES COMBINAÇÕES DE LÂMINAS DE Eucalyptus saligna E Pinus taeda EM PAINÉIS ESTRUTURAIS LVL / THE INFLUENCE OF DIFFERENT COMBINATIONS OF Eucalyptus saligna AND Pinus taeda VENEERS IN LVL STRUCTURAL PANELS
This research aimed at investigating the influence of the positioning of Eucalyptus saligna and Pinus taeda wood veneers on the layers composing the Laminated Veneer Lumber (LVL) structural panels. The panels were manufactured in six different combinations of five veneers of 3,2 mm, glued with phenol-formaldehyde, resulting in treatments constituted of wood
Publicado em: 2009