Phase Transformation
Mostrando 1-12 de 574 artigos, teses e dissertações.
-
1. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
2. Effects of argon plasma and aging on the mechanical properties and phase transformation of 3Y-TZP zirconia
Resumo Avaliar a resistência à flexão (FS) e o módulo de flexão (FM) de uma cerâmica comercial 3Y-TZP após envelhecimento artificial, e com ou sem dois tempos de aplicação de plasma não térmico (NTP). Além disso, a transformação de fase cristalina e a nano-topografia de superfície após a aplicação de NTP, durante diferentes períodos de env
Brazilian Dental Journal. Publicado em: 2022
-
3. Ferrimagnetic to paramagnetic transition and dielectric relaxation in Ni1-xZnxFe2O4 ferrites
Abstract The spinel ferrite system Ni1-xZnxFe2O4 (x=0-0.7, Δx=0.1) was prepared by wet chemical co-precipitation method using sulfates of respective metal ions. The electrical resistivity and dielectric properties of the prepared samples have been studied as a function of temperature, frequency, and Zn content (x). The DC resistivity (ϱ) was measured in th
Cerâmica. Publicado em: 2021-06
-
4. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
5. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics
Abstract The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2-3 mol% Y2O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relativ
Cerâmica. Publicado em: 2021-03
-
6. Microstructural Evolution and Phase Transformation of a Ti-5Nb-5Al Alloy During Annealing Treatment
The microstructural evolution and phase transformation of a Ti-5Nb-5Al alloy during isothermal annealing treatment were studied in this paper. The microstructural evolution was analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) equipped with X-ray energy dispersive spectroscopy (EDS) and electron backscattering diffraction (EBSD). The fi
Mat. Res.. Publicado em: 05/12/2019
-
7. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
8. Enfrentando desigualdades na saúde: impasses e dilemas do processo de regionalização no Brasil
Resumo: Este trabalho busca retratar o renovado papel das políticas regionais frente aos processos de reconfigurações territoriais na fase recente da globalização - predominantemente neoliberal. Objetiva, ainda, identificar alguns dos impasses que tais transformações - em suas múltiplas escalas e dimensões - trazem para o fortalecimento das polític
Cad. Saúde Pública. Publicado em: 17/10/2019
-
9. Proposição de um Modelo Empírico para Determinação das Temperaturas Críticas Durante Resfriamento Contínuo em Zonas Termicamente Afetadas de Aços IF Soldados pelo Processo TIG
Resumo Aços IF são amplamente empregados na indústria automobilística. No decorrer das aplicações de soldagem, eles passam pela transformação de fase austenita (γ) → ferrita (α) que ocorre por nucleação e crescimento de grão e, em condições isotérmicas, é descrita pela equação JMAK. Todavia, as transformações de fases pós-soldagem ac
Soldag. insp.. Publicado em: 23/09/2019
-
10. Determination of phases and residual stresses after martensitic transformation induced by rolling in 304L stainless steel
RESUMO O aço inoxidável austenítico 304L é suscetível à transformação martensítica induzida por deformação. Esta transformação de fases depende da temperatura, assim como do modo, taxa e nível de deformação. Neste trabalho as fases e tensões residuais de um aço TRIP 304L, em que a transformação martensítica foi induzida por laminação a
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Efeitos da variação da concentração de solução polimérica aquosa a base de PVP na têmpera de aço AISI 4140
RESUMO A têmpera é um tratamento térmico que tem como principal objetivo a elevação de dureza e resistência mecânica dos aços por meio da sua transformação microestrutural. O processo se baseia na elevação da temperatura do material até a austenitização, seguida do arrefecimento por meio da imersão em um fluido, a qual precisa ser rápida o s
Matéria (Rio J.). Publicado em: 16/09/2019