Petroleum Well
Mostrando 1-12 de 177 artigos, teses e dissertações.
-
1. The Stabilization of Asphaltenes in Different Crude Fractions: A Molecular Approach
The conditions of petroleum extraction may allow asphaltenes to precipitate, causing deposition that clogs wells, pipes and equipment, consequently reducing productivity. In this work, the solubility parameters and precipitation onset of polar fractions of heavy crudes from Brazilian fields were estimated using a simplified system of n-heptane/toluene mixtur
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
2. Utilization of ferronickel slag in hot mix asphalt
Abstract The growing concern in minimizing the disorderly disposal of waste in nature has been influencing measures that seek to give new environmentally sustainable and economically viable purposes for these materials. The use of steel slag aggregate in road paving emerges as an alternative for reducing the storage of this material in industrial yards, as w
REM, Int. Eng. J.. Publicado em: 2021-01
-
3. HEAT-APPLICATOR MACHINE FOR WEED CONTROL
ABSTRACT Pesticide environmental risks and increased weed resistance have encouraged studies for alternatives to herbicides. Among these are weed thermal control methods by controlled heat application machines. Thus, this study aimed to test a prototype of heat-applicator machine as a function of changes in gas pressure, travel speed, and tire traffic effect
Eng. Agríc.. Publicado em: 2020-10
-
4. Editorial Comment: Effects of testicular dysgenesis syndrome components on testicular germ cell tumor prognosis and oncological outcomes
ABSTRACT Pesticide environmental risks and increased weed resistance have encouraged studies for alternatives to herbicides. Among these are weed thermal control methods by controlled heat application machines. Thus, this study aimed to test a prototype of heat-applicator machine as a function of changes in gas pressure, travel speed, and tire traffic effect
Int. braz j urol.. Publicado em: 2020-10
-
5. THE SUCCESS OF THE BRAZILIAN ALCOHOL PROGRAM (PROÁLCOOL) - A DECADE-BY-DECADE BRIEF HISTORY OF ETHANOL IN BRAZIL
ABSTRACT The National Alcohol Program (Proálcool) was a strategic policy of the Brazilian government to replace petroleum-based fuels with alcohol (ethanol). Based on the review, we can choose the 1960s as a start point for a leap in development. Over the 500 years of sugarcane history in Brazil, the crop enters the second decade of the 21st century with ex
Eng. Agríc.. Publicado em: 2020-04
-
6. Phyto- and Bio-Chemical evaluation of Diospyros kaki L. cultivated in Egypt and its biological activities
Resumo Diospyros kaki L. ou Costata é a principal variedade de caqui progressivamente consumida no mercado e exportação egípcia. O objetivo deste estudo foi investigar os efeitos bioprotetores do extrato alcoólico de frutos e folhas de D. kaki utilizando modelos de ratos “in vivo”. Extratos de éter de petróleo provenientes de frutos e folhas foram
Braz. J. Biol.. Publicado em: 05/08/2019
-
7. Depth effect on sandstone strength properties
Abstract The present article focuses on the study of different physical-mechanical parameters; it presents the results of a preliminary investigation aimed at experimental characterization. To simulate the mechanical behavior of the rock, a reference material needs to be chosen. The reference material selected is Sandstone, which is commonly used in this fie
REM, Int. Eng. J.. Publicado em: 2019-06
-
8. Model Molecules for Evaluating Asphaltene Precipitation Onset of Crude Oils
Predicting the compatibility of crude oils from different streams can be done by applying models that use the solubility parameter of the oils. The approximate solubility parameter value of a given crude oil can be calculated by observing the asphaltene precipitation onset caused by titration with n-heptane. For oils whose precipitation onset is not well def
J. Braz. Chem. Soc.. Publicado em: 23/05/2019
-
9. Combustibility behavior of PCI coals, green petroleum coke and charcoal fines used as fuel for injection into blast furnace tuyeres
Abstract Pulverized coal injection (PCI) into blast furnace tuyeres is widely used by integrated steel mills worldwide to reduce the consumption of coke and costs. High injection rates are desirable. The big challenge is to achieve them with cheaper and lower quality raw materials, without losing the quality of the hot metal and the productivity of the blast
REM, Int. Eng. J.. Publicado em: 2019-03
-
10. Evaluation of zinc removal and compressive strength of self-reducing pellets composed of Electric Arc Furnace Dust
Abstract The amount of Electric Arc Furnace Dust (EAFD) is continuously increasing in mini-mill steel plants. This dust is considered a hazardous waste because of the presence of elements like lead, cadmium and chromium. Among many different treatment processes for this issue, there is the possibility of returning the EAFD back to the Electric Arc Furnace. T
REM, Int. Eng. J.. Publicado em: 2019-03
-
11. Características e procedência da lenha usada na cocção no Brasil
RESUMO A lenha vem sendo substituída ao longo dos anos por novas formas de energia, como o gás liquefeito de petróleo (GLP) e a eletricidade. Porém, esse combustível ainda representa uma fração significativa da matriz energética brasileira, muito embora as pesquisas referentes ao seu uso ainda sejam limitadas e regionais. O objetivo deste estudo foi
Estud. av.. Publicado em: 2019-01
-
12. Study of the Corrosive Behavior of the AISI 1020 Steel in Acid Crude Oil by Microscopic Techniques (LM, AFM and SEM/EDX) and Raman Spectroscopy
Microscopic techniques were combined to study the influence of corrosion rate on the morphologic behavior of AISI 1020 steel specimens submitted to thermal degradation of a typical acid crude oil (total acid number (TAN) = 2.1390 mg KOH g-1 and total sulfur (S) = 0.7778 wt.%). The techniques used were light microscopy (LM), scanning electron microscopy/energ
J. Braz. Chem. Soc.. Publicado em: 2018-08