Perforacion
Mostrando 1-6 de 6 artigos, teses e dissertações.
-
1. Evaluación reológica de fluidos de perforación base agua con nanosílice
ABSTRACT Generally, drilling fluids may be defined as fluids with a composition that can assist the generation and removal of cuttings from the borehole to the surface. They are classified according to their base as water based mud (WBM), oil based mud (OBM) or gas. Polymers, densifiers, brines, surfactants, among others are the primary components of drillin
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Caracterización de semielaborados de aleaciones de titanio procesadas por extrusión y laminación perforación (proceso Mannesmann)
ABSTRACTFor the manufacture of seamless pipes and tubes are used, as raw materials, hollow bars from hot deformation processes like extrusion and rotary tube piercing (Mannesmann process). Starting from these semi-elaborated products and by means of successive cross sections reductions through tube drawing or tube rolling (cold pilgering) the requested final
Matéria (Rio J.). Publicado em: 2015-09
-
3. El cultivo de alfalfa utilizando agua de perforación, agua residual urbana y precipitaciones
The objective of this study was to analyse the production of alfalfa biomass, the efficiency of water use and the nutritional value of forage, inside an irrigation structure of an experimental facility that uses treated urban wastewater, artesian well water and rainfall, at the campus of the Universidad National de Rio Cuarto (Córdoba-Argentina). The irriga
Rev. bras. eng. agríc. ambient.. Publicado em: 2012-12
-
4. CHARACTERIZATION OF SHALES BASED ON DRILLING CUTTING SAMPLES, PRESERVED CORES AND WELL LOGS / CARACTERIZAÇÃO DE FOLHELHOS BASEADA EM AMOSTRAS DE CALHA, TESTEMUNHAS E INTERPRETAÇÃO DE PERFIS / CARACTERIZACIÓN DE FOLHELHOS BASADO EN MUESTRAS DE CANAL, TESTIGOS E INTERPRETACIONES DE PERFILES
Durante a perfuração de poços em seqüências argilosas, tais como os folhelhos, tem-se registrados sérios problemas operacionais e de estabilidade de poço. Estes problemas estão relacionados com as propriedades do fluido de perfuração, as condições de contorno e principalmente, com as propriedades da rocha perfurada. No estudo do comportamento da
Publicado em: 1999
-
5. ANÁLISIS DEL COMPORTAMIENTO DE COLUMNAS DE REVESTIMIENTO FRENTE AL MOVIMIENTO DE SAL EN POZOS DE PETRÓLEO / ANALYSIS OF CASING STRESSES IN OIL WELLS DUE TO THE CREEP OF ROCK SALT / ANÁLISE DO COMPORTAMENTO DE COLUNAS DE REVESTIMENTO FRENTE À MOVIMENTAÇÃO DE SAL EM POÇOS DE PETRÓLEO
Este trabalho apresenta procedimentos para análise dos esforços em colunas de revestimento instaladas em um poço de petróleo, sob a ação do fenômeno de fluência do sal, sendo também abordado os principais aspectos da estabilidade e deformabilidade das rochas salinas durante a fase de perfuração. Para a discretização e solução das equações di
Publicado em: 1999
-
6. EVALUATION OF DRILL BIT PERFORMANCE TAKING INTO ACCOUNT THE IN SITU STRESSES / EVALUACIÓN DEL DESEMPEÑO DE BROCAS DE PERFORACIÓN CONSIDERANDO EL ESTADO DE TENSIONES IN SITU / AVALIAÇÃO DO DESEMPENHO DE BROCAS DE PERFURAÇÃO LEVANDO EM CONTA O ESTADO DE TENSÕES IN SITU
The present dissertation describes a correlation between the bit performance and the state of stress acting upon the rock formation located immediately beneath the bottom of the wellbore. Bit performance data from 6 wells drilled offshore Brazil were collected and anlyzed. In order to reduce the empiricism associated with this type of data analysis, a study
Publicado em: 1998