Partition Of Unity
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Large deflection and initial instability analysis of anisotropic plates by the generalized finite element method
Abstract This paper presents investigations laminated plates under moderately large transverse displacements and initial instability, through the Generalized Finite Element Methods - GFEM. The von Kármán plate hypothesis are used along with Kirchhoff and Reissner-Mindlin kinematic plate bending models to approximate transverse displacements and critical bu
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
2. Numerical experiments with the Generalized Finite Element Method based on a flat-top Partition of Unity
Abstract The Stable Generalized Finite Element Method (SGFEM) is essentially an improved version of the Generalized Finite Element Method (GFEM). Besides of retaining the good flexibility for constructing local enriched approximations, the SGFEM has the advantage of presenting much better conditioning than that of the conventional GFEM. Actually, bad conditi
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
3. Comparative Analysis of Ck- and C0-GFEM Applied to Two-dimensional Problems of Confined Plasticity
AbstractFor many practical applications in engineering, a complex structure shows linear elastic behavior over almost all its extension, but exhibits confined plasticity contained in some small critical regions, e.g. stress concentrations in fillets and sharp internal corners. The behavior of C0- and Ck-GFEM is investigated in this class of problems. The fir
Lat. Am. j. solids struct.. Publicado em: 2015-05
-
4. Representação de superfícies livres utilizando partição da unidade implícita no sistema Freeflow / Free surface representation on freeflow using partition of unity implicits
Este trabalho consiste em introduzir uma nova abordagem de representação de superfície no ambiente de simulação Freeflow2D. Consiste em usar Partição da Unidade Implícita para estimar da superfície a geometria, normais e curvatura. Procurando se valer das vantagens de métodos do tipo meshless (sem malha) conservando no entanto a malha Lagrangiana,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2011
-
5. Estrutura de dados Mate Face e aplicações em geração e movimento de malhas / The Mate Face data structure and applications in mesh generation and movement
Topological data Structures (DS) oer several advantages when performing a deformation on a mesh. These DSs allow movement throughout the mesh without modifying its topology, are relatively simple to implement, and there is always the possibility of merging it to simulation/deformation cycle on a completely automatic and ecient form. The main goal of this wor
Publicado em: 2009
-
6. Least squares and point-based surfaces: new perspectives and Applications / Minimos-quadrados e aproximação de superfície de pontos: novas perspectivas e aplicações
Surface reconstruction from unorganized points has been one of the most promising scientific research areas in Computer Graphics. In addition, it has been used successfully for the definition of fluid interface in numerical simulation of fluid flow. There are several reasons to that fact: for instance, considering Computer Graphics, we have the handling of o
Publicado em: 2008
-
7. Regularized implicit surface reconstruction from points and normals
We consider the problem of surface reconstruction of a geometric object from a finite set of sample points with normals. Our contribution is to present a new scheme for implicit surface reconstruction. Similarly to the multilevel partition of unity (MPU) method we hierarchically divide the domain obtaining local approximation for the object on each part, and
Journal of the Brazilian Computer Society. Publicado em: 2007-12
-
8. Funciones termodinámicas relativas a la transferencia del ketoprófen desde el agua hasta algunos sistemas orgánicos
The thermodynamics of molal partitioning of ketoprofen (KTP) was studied in cyclohexane/buffer (CH/W), octanol/buffer (ROH/W), and dimyristoyl phosphatidylcholine (DMPC), dipalmitoyl phosphatidylcholine (DPPC), and egg lecithin (EGG/W) liposome systems. In all cases the partition coefficients (Kmo/w)were greater than unity; therefore the standard free energi
Química Nova. Publicado em: 2006-07
-
9. An extension of the partition of unity finite element method
Here, we propose an extension of the Partition of Unit Finite Element Method (PUFEM) and a numerical procedure for the solution of J2 plasticity problems. The proposed method is based in the Moving Least Square Approximation (MLSA) and is capable of overcoming singularity problems, in the global shape functions, resulting from the consideration of linear or
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2005-09
-
10. Balanço de energia e evapotranspiração de cafezal adensado em crescimento sob irrigação localizada. / Energy balance and evapotranspiration in a high density young coffee under located irrigation.
The objectives of this study were to evaluate the magnitude of global evapotranspiration (ETc) in a high density young coffee crop (3.5mx0.9m) under drip irrigation, the ETc partition considering hedgerows and interrows, and the partition of the available radiant energy between sensible and latent heat fluxes. The experiments were conducted from September 20
Publicado em: 2005
-
11. Finite element-based model for crack propagation in polycrystalline materials
In this paper, we use an extended form of the finite element method to study failure in polycrystalline microstructures. Quasi-static crack propagation is conducted using the extended finite element method (X-FEM) and microstructures are simulated using a kinetic Monte Carlo Potts algorithm. In the X-FEM, the framework of partition of unity is used to enrich
Computational & Applied Mathematics. Publicado em: 2004-12
-
12. Métodos sem malha e método dos elementos finitos generalizados em análise não-linear de estruturas / Meshless Methods and Generalized Finite Element Method in Structural Nonlinear Analysis
The Generalized Finite Element Method, GFEM, shares several features with the so called meshless methods. The approximation functions used in the GFEM are associated with nodal points like in meshless methods. In addition, the enrichment of the approximation spaces can be done in the same fashion as in the meshless hp-Cloud method. On the other hand, the par
Publicado em: 2002