Particles
Mostrando 1-12 de 9569 artigos, teses e dissertações.
-
1. Impact of fuel quantity on luminescence properties of Sr3Al2O6:Eu by combustion synthesis
Abstract The photoluminescent behavior of Eu-doped Sr3Al2O6 obtained by highly efficient solution combustion synthesis is reported. In order to understand the influence of the fuel on the synthesis, the stoichiometric quantity and an excess of fuel were evaluated. By adjusting the amount of fuel, different luminescence responses were obtained, allowing europ
Cerâmica. Publicado em: 2023
-
2. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
3. The BigFLUX Magnetic Matrix Technology
Abstract The Magnetic separation of ultra-fine ore particles has always posed a challenge to the JONES/WHIMS process. Despite many advances in this technology, no effective improvement has been made to its core component: The Magnetic Matrix. The current approach to separate ultra-fine particles teaches that the gap of the matrix and its teeth size must be s
REM - International Engineering Journal. Publicado em: 2022
-
4. Hybrid MAPbI3 Perovskite Growth Mechanism from Irregular Particles to Cuboid and Hopper-Type Morphologies
Methylammonium lead iodide (MAPbI3), used as light-harvesting layer in solar cell devices, has attracted great attention from scientific community due to its excellent photovoltaic performance. In this work, we have shown a comprehensive study on the hybrid organic-inorganic MAPbI3 perovskite growth mechanism from irregular small particles to cuboid shape fo
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. MICROPLÁSTICOS: USO NA INDÚSTRIA COSMÉTICA E IMPACTOS NO AMBIENTE AQUÁTICO
Environmental pollution from plastics and microplastics is currently one of the most relevant issues of the scientific community and cosmetic industry. In particular, microplastics are referred to as small pieces of plastic less than five millimeters (<5mm) and do not dissolve in water, can be harmful to the ocean and aquatic life. Microplastics can be desig
Química Nova. Publicado em: 2022
-
6. Thermostimulated crystal structure transformation of the polymineral clay submicron particles
Abstract Changes in the structure of phyllosilicate microparticles of submicron fractions of polymineral clay with an average size of 290 nm, as well as changes in the positions of impurity ions of transition metals in the crystal lattice, were studied by X-ray diffraction analysis, Fourier transform infrared spectroscopy, and high-resolution electron parama
Cerâmica. Publicado em: 2022
-
7. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
8. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
9. Per-Aqueous Liquid Chromatography for the Separation of Polar Compounds Preparation and Characterization of Poly(ethylene oxide co dimethylsiloxane) Based Stationary Phase
Poly(ethylene oxide-co-dimethylsiloxane) was thermally immobilized on silica particles-Si(PEO)-to separate small polar compounds with water-rich mobile phases. Poly(ethylene oxide-co-dimethylsiloxane) content on Si(PEO) stationary phase was optimized using a central composite design. Infrared spectroscopy, scanning electron microscopy, and thermogravimetric
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
10. Performance analysis of the beneficiation process of bauxite from the Juruti Mine. Industrial sampling and performance evaluation
Abstract Sampling campaigns were conducted at the industrial bauxite wash circuit of the Juruti Bauxite Mine in Pará, Brazil. The beneficiation circuit consisted of crushing, scrubber washing, wet screening, hydrocyclone classification, and fltration. Considering laboratory processing of samples and statistical analyses of historical operation databases, ma
REM - International Engineering Journal. Publicado em: 2022
-
11. Mix design formulation range for metakaolin-based geopolymer synthesis
Abstract This article presents a range of mix design formulations to obtain metakaolin-based geopolymer synthesis. Geopolymer samples were synthesized from metakaolin, a 10 M sodium hydroxide solution, and alkaline sodium silicate. These three components were mixed in different proportions to form a paste which was molded in a cylindrical shape, set at room
REM - International Engineering Journal. Publicado em: 2022
-
12. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022