Particle
Mostrando 1-12 de 5235 artigos, teses e dissertações.
-
1. Sedimentation and rheological behavior of reactive and non-reactive magnesium hydroxide pulps for industrial spray dryer processing
Abstract Two different reactive concentrated magnesium hydroxide (HM) pulps, produced in a lab reactor mill, and a synthetic and non-reactive HM-pulp, for comparative analyses, have been prepared and studied. Sodium polyacrylate was selected as a dispersant for improving the HM pulp fluidity, with concentrations varying from 0.42% to 2.0% on a dry basis. The
Cerâmica. Publicado em: 2023
-
2. Ultrafine quartz flocculation: Part I. System characterization and variables selection
Abstract A characterization study was performed to verify the more relevant physicochemical properties for quartz flocculation with polyacrylamide, as well as to define which variables should be further investigated regarding this flocculation system. Polyacrylamide was evaluated through molecular weight, radius of gyration, and infrared spectrometry. A natu
REM - International Engineering Journal. Publicado em: 2022
-
3. INTERFERENCE OF OPERATING SPEED AND PHYSICAL PROPERTIES OF GRANULATED FERTILIZERS WITH THEIR DEPOSITION
ABSTRACT Uniformity in the deposition of granulated fertilizers in the seed furrow is essential for crop development and productivity. Quantitative (dose and flow) and qualitative factors (segregation and formulation) influence granulated fertilizer distribution throughout its application. This experiment aimed to compare the deposition of two granulated fer
Engenharia Agrícola. Publicado em: 2022
-
4. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
5. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
6. Use of mineral particle film to protect ‘Okitsu’ tangerine and ‘Valencia’ orange against Anastrepha fraterculus and the effect on fruit quality
ABSTRACT The particle film technology has been reported as a promising tool in pest control. The objective of this work was to evaluate the efficiency of kaolin-based products against the oviposition of South American fruit fly, Anastrepha fraterculus (Dip.:Tephritidae), and its effect on the quality of citrus fruits. The experiment was conducted in orchards
Revista Ceres. Publicado em: 2022
-
7. MLA and optical microscopy as complementary techniques to the iron ore geometallurgical studies
Abstract Mineral liberation is an important variable to be considered in the iron ore geometallurgical studies, especially since it provides information leading to the understanding of the ore’s behaviour in the beneficiation process, mainly when harder ores are concerned. Nowadays, the professionals and researchers in the mineral industry have been using
REM - International Engineering Journal. Publicado em: 2022
-
8. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
9. Estimativa de Parâmetros e Solução de um Problema de Transferência de Calor Utilizando Métodos de Otimização Modificados
RESUMO Neste artigo é realizada a estimativa de parâmetros e solução de um problema de transferência de calor, onde os resultados numéricos são comparados com dados experimentais obtidos na literatura. O modelo matemático é resolvido numericamente utilizando o Método das Diferenças Finitas (MDF) com formulação implícita. Já a estimativa dos pa
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
10. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
11. Optimization Techniques and Mathematical Modeling Applied to Reluctance Motors
Abstract The present work aims at the application of different optimization strategies in the electromagnetic analysis of the Variable Reluctance Motor (VRM) through Finite Element (FE) simulation. Two case studies are investigated: the first one aims to optimize the geometry and electrical characteristics of windings of a single-phase VRM 6/6, minimizing co
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
12. Efficient Low-Complexity Optimized Channel Estimating Methods for OFDM-Based Low-Voltage Broadband Power Line Communication Systems
Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonlinear time-variant impulse response and noise interference effects introduced by the BB-PLC channel. In this paper, we append the Particle S
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022