Particle Size
Mostrando 1-12 de 1381 artigos, teses e dissertações.
-
1. Ultrafine quartz flocculation: Part I. System characterization and variables selection
Abstract A characterization study was performed to verify the more relevant physicochemical properties for quartz flocculation with polyacrylamide, as well as to define which variables should be further investigated regarding this flocculation system. Polyacrylamide was evaluated through molecular weight, radius of gyration, and infrared spectrometry. A natu
REM - International Engineering Journal. Publicado em: 2022
-
2. INTERFERENCE OF OPERATING SPEED AND PHYSICAL PROPERTIES OF GRANULATED FERTILIZERS WITH THEIR DEPOSITION
ABSTRACT Uniformity in the deposition of granulated fertilizers in the seed furrow is essential for crop development and productivity. Quantitative (dose and flow) and qualitative factors (segregation and formulation) influence granulated fertilizer distribution throughout its application. This experiment aimed to compare the deposition of two granulated fer
Engenharia Agrícola. Publicado em: 2022
-
3. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
4. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
5. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
6. MLA and optical microscopy as complementary techniques to the iron ore geometallurgical studies
Abstract Mineral liberation is an important variable to be considered in the iron ore geometallurgical studies, especially since it provides information leading to the understanding of the ore’s behaviour in the beneficiation process, mainly when harder ores are concerned. Nowadays, the professionals and researchers in the mineral industry have been using
REM - International Engineering Journal. Publicado em: 2022
-
7. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
8. Biphasic 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 nanopowders by in situ sol-gel synthesis
Abstract Nanopowders of the 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 (x=0, 0.25, 0.5, 0.75, and 1) were synthesized by the in situ sol-gel method using poly(acrylic acid) (PAA1800) as a chelating agent. The synthesis developed using PAA1800 ensured the simultaneous crystallization of two phases. The results provided a reliable method for producing biphasic nanopowders i
Cerâmica. Publicado em: 2022
-
9. An alternative route to extract nickel and cobalt from non-commercial laterite ore
Abstract Laterite ores, which represent around two-thirds of nickel reserves, became an important source of nickel and cobalt metals. The objective of the present study was to investigate the efficiency of a hybrid route to extract nickel and cobalt present in a laterite ore sample which was not commercially attractive to be processed through the current rou
REM - International Engineering Journal. Publicado em: 2022
-
10. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
11. Pretreatment and Enzymatic Saccharification of Water Hyacinth, Sugarcane Bagasse, Maize Straw, and Green Coconut Shell Using an Organosolv Method with Glycerol and FeCl3
A method to pretreatment of biomasses using glycerol as a green solvent was developed. Optimization of organosolv pretreatment was performed using a 23 factorial design, investigating synergism among the variables particle size (from < 0.85 to > 2.0 mm), FeCl3 concentration (0.025-0.175 mol L-1), and temperature (160-220 °C). Although the effects of the var
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022