Parametric Design
Mostrando 1-12 de 119 artigos, teses e dissertações.
-
1. Design and Simulation of Broadband Horn Nanoantennas for Nanophotonic Applications
Abstract Optical plasmonic nanoantennas have proven useful in nanoplasmonic applications, paving the way for more efficient wireless optical communications. In this work, we propose a parametric study of a plasmonic horn nanoantenna in flat H sectorial format and beveled horn, both designed to radiate in the three wavelengths of optical communications: [850
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Analysis of the Resonator Element in Different Positions in the Circular Patch Microstrip Antenna
Abstract In this article, a circular patch microstrip antenna with a metamaterial resonator for 4G applications is proposed. For the design of the circular antenna patch, an approximate calculation was performed. The circular resonator is inserted into the patch for some antennas, in different positions for a parametric study. When incorporating the resonato
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
3. Higher Order Mode Attenuation in Microstrip Patch Antenna with DGS H Filter Specification from 5 to 10 GHz Range
Abstract This work proposes the application of a slot in the ground plane, Defected Ground Structure (DGS), of a microstrip patch antenna. The application of this technique aims to attenuate higher-order excited modes without deteriorating the antenna parameters in the fundamental mode. The methodology for the design of the slot in H-format is presented, bas
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
4. Physics-Based Design of Microstrip Magnetic Dipoles Using Cavity Model
Abstract This paper presents an efficient technique of microstrip magnetic dipoles design that explores the physics ruling the antenna behavior not restricting to parametric analyses in a full-wave simulation software. The proposed approach makes use of the cavity model whose parameters are progressively enhanced by using full-wave electromagnetic simulation
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
5. Effect of hCG application at different moments of the estrous cycle on corpus luteum and uterine vascularization and serum progesterone concentration in mares
Abstract Establishment of pregnancy after embryo transfer is the ultimate goal of an embryo transfer program and increasing pregnancy rates and reducing pregnancy loss are mandatory. The utilization of treatments to improve conception rates in recipient mares has been the focus of several research groups over the last years and the results are controversial.
Anim. Reprod.. Publicado em: 25/11/2019
-
6. Reliability of reinforced concrete beams designed in accordance with Brazilian code NBR-6118:2014
Resumo O presente trabalho busca avaliar o índice de confiabilidade atingido pelas vigas de concreto armado dimensionadas de acordo com a norma brasileira NBR-6118:2014 em relação ao estado limite último de flexão. As principais estatísticas das resistências são obtidas por simulações de Monte Carlo utilizando o software ANSYS e a ferramenta probab
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
7. HDL-PARTICLES SEPARATION EMPLOYING DIFFERENT PRECIPITATING AGENTS: FUNCTIONAL PROPERTIES OF THE IMPACT OF CHEMICAL PRECIPITATION ON LIPOPROTEIN PARTICLE-SIZE AND PARAOXONASE-1-ACTIVITY
First-generation methods used to quantify HDL-cholesterol have been used for decades. Therefore, first-generation precipitatingreagents still in use, the chemical impact on HDL-particles functionality (structure/activity-relationship) is not well-documented. The study aim was to identify the most efficient precipitating-reagent for lipoprotein separation to
Quím. Nova. Publicado em: 21/10/2019
-
8. Productivity and Superficial Quality of an Aspherical Die Using CAD/CAM
ABSTRACT Nowadays, it is hard to imagine modern industry without the manufacturing and design software aided by computer, known as CAD/CAM, once the search for excellence in complex geometry parts, reduced time, quality assurance and interchangeability is increasing. Within this quest, the CAD/CAM platform has become a significant factor in manufacturing, es
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. On-load Back-EMF Optimization Based on the Back-EMF MST Method and Parametric Optimization
Abstract This paper proposes an optimal design for a surface mounted permanent magnet synchronous machine (SM-PMSM) based on parametric optimization process to reduce the on-load Back-EMF distortions caused by an increase in the electromagnetic load and in the saturation. Unlike conventional methods described in the literature, the optimization approach prop
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
10. Enhancement the Fatigue Life of Floating Breakwater Mooring System Using Tuned Liquid Column Damper
Abstract Safety is a key design criterion for floating structures. A high rate of mooring accidents has been reported over the past decades. Preventing mooring line failure is a key design objective for floating breakwater systems. The mooring system comprises sets of mooring lines anchored to the seabed. These components are exposed to highly cyclic nonline
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
11. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
12. FE Modeling and Seismic Performance Evaluation of Hybrid SMA-Steel RC Beam-Column Joints
Abstract Severe permanent deformations of buildings during earthquakes have been found as one of the major causes of the instability and failure of structures. The application of superelastic Shape Memory Alloy rebars at the plastic hinge region of reinforced concrete beam-column joints (SESMA-BCJs) can eliminate the seismic residual deformations. Such self-
Lat. Am. j. solids struct.. Publicado em: 27/06/2019