Packing Material
Mostrando 1-12 de 60 artigos, teses e dissertações.
-
1. Steroid vs. antibiotic impregnated absorbable nasal packing for wound healing after endoscopic sinus surgery: a randomized, double blind, placebo-controlled study
Resumo Introdução: A cirurgia endoscópica nasossinusal pode levar à formação de crostas e sinéquias, o que pode afetar o processo de cicatrização. Objetivo: O objetivo do nosso estudo foi comparar a influência do espaçador nasal absorvível embebido em esteroide versus antibiótico versus solução salina na cicatrização de ferida pós-operat�
Braz. j. otorhinolaryngol.. Publicado em: 29/08/2019
-
2. Determination of the optimal replacement content of Portland cement by stone powder using particle packing methods and analysis of the influence of the excess water on the consistency of pastes
Resumo O cimento Portland é considerado o componente de base com o maior impacto ambiental na construção civil, em termos de emissões de CO2. Quanto aos agregados, o processo de cominuição das rochas, além da areia artificial, gera pó de pedra que acaba sendo armazenado ao ar livre, gerando impactos ambientais. Assim, a substituição do cimento por
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
3. Caracterização da cinza de caroço de açaí residual para adição ao concreto
Resumo Os problemas ambientais são uma realidade do mundo atual e vêm associados ao crescimento urbano e populacional, com pouco ou nenhum planejamento. O setor da construção civil é um dos maiores consumidores de recursos naturais e gerador de resíduos sólidos. Assim, é interessante pensar em uma maneira de incorporar materiais que hoje são conside
Ambient. constr.. Publicado em: 2019-03
-
4. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018
-
5. Preservation of sweet red pepper paste quality: effect of packing material, ozone gas and protective agent use
Abstract Unlike conventional methods, sweet red pepper paste was produced by various techniques in assistance of various starter cultures. Products were stored at 37 °C for 60 days. Salinity, acidity, color change, invert sugar, brown pigment formation parameters were determined during storage period. Microbiological, statistical and sensory evaluation meth
Food Sci. Technol. Publicado em: 22/03/2018
-
6. Reinforcement of poly (vinyl alcohol) films with alpha-chitin nanowhiskers
Abstract Composites Films were produced using Poly (Vinyl Alcohol) as the soft material and reinforced with Chitin Nanowhiskers(NWCH) as the rigid material. The present work studies the reinforcing mechanisms of NWCH in PVA films, made through a solvent casting technique and characterized for their calorimetric, swelling and mechanical properties. DSC tests
Polímeros. Publicado em: 15/03/2018
-
7. ICP OES Determination of Contaminant Elements Leached from Food Packaging Films
ABSTRACT Determination of potential contaminants elements in food packing films arising from contact with acidic aqueous foods was undertaken by inductively coupled plasma optical emission spectrometry (ICP OES) in accordance with DIN EN 1186-1. Test sections from plastic films were totally immersed in 3% w/v CH3COOH used as the food simulant. Testing was c
Braz. arch. biol. technol.. Publicado em: 17/08/2017
-
8. Computational study on structure and properties of new energetic material 3,7-bis(dinitromethylene)-2,4,6,8-tetranitro-2,4,6,8-tetraaza-bicyclo[3.3.0]octane
The IR spectrum, crystal structure, electronic structure, thermodynamic properties, heat of formation and detonation properties of a new polynitro heterocyclic energetic material 3,7-bis(dinitromethylene)-2,4,6,8-tetranitro-2,4,6,8-tetraazabicyclo[3.3.0]octane were investigated theoretically. The calculated results show that this compound has a centrosymmetr
Quím. Nova. Publicado em: 2016-05
-
9. Empacotamento de partículas de cimento e sílica ativa em pastas pelo uso de modelo analítico
Pela sua pozolanicidade e alta reatividade, a sílica ativa, quando adicionada ao concreto em porcentagens adequadas, pode proporcionar um aumento na resistência mecânica do material. Além da contribuição química, alterações físicas no concreto com sílica ativa também são observadas pela melhora no empacotamento de partículas na pasta, resultado
Rev. IBRACON Estrut. Mater.. Publicado em: 2016-02
-
10. Analysis of Dimension Stone Waste Addition to the Clayey Mass Used in Roof Tile Production
Addition of dimension stone waste to clayey mass is an alternative to make the dimension stone sector more environmentally sustainable and to reduce the consumption of clayey raw material. Our aim is to study the technical feasibility of dimension stone waste addition to the clayey mass used in roof tile production. Samples of waste and clay were tested for
Mat. Res.. Publicado em: 2015-12
-
11. Particle passage kinetics and neutral detergent fiber degradability of silage of pineapple waste (aerial parts) under different packing densities
The objective of this study was to determine the kinetics of in situ degradability parameters of the dry matter (DM) and neutral detergent fiber (NDF) and the passage of materials originating from the ensilage of the waste from pineapple cultivation (aerial parts). The four treatments utilized were silage of pineapple waste compacted at 600, 700, 900 and 100
R. Bras. Zootec.. Publicado em: 2014-01
-
12. Remoção de matéria orgânica carbonácea e nitrogênio em Reator Aeróbio-Anóxico de Leito Fixo (RAALF) aplicado ao pós-tratamento de efluente de reator anaeróbio / Removal of carbonaceous organic matter and nitrogen in an Aerobic-Anoxic Fix Bed Reactor (AAFBR) applied to the tertiary treatment of domestic wastewater
This work presents the Aerobic-Anoxic Fix Bed Reactor (AAFBR), with superimposed chambers, as an alternative concerning the post-treatment of anaerobic reactors efiluents aiming the removal of carbonaceous organic matter and nitrogen. Polyurethane foam cubic matrices (5 mm) were used packing material. Hydrodynamic essays were carried out in order to obtain t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/07/2011