Organic Solar Cells
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Supramolecular Approach in Energy Conversion Devices
This review summarizes investigations carried out at the Laboratory of Photochemistry and Energy Conversion (LFCE) in the University of São Paulo dealing with design and characterization of ruthenium(II), rhenium(I) and iridium(III) polypyridine complexes with desired photochemical and photophysical properties in light of the development of optoelectronics
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
2. Flexible, Large-Area Organic Solar Cells With Improved Performance Through Incorporation of CoFe2O4 Nanoparticles in the Active Layer
Cobalt ferrite (CoFe2O4) nanoparticles (NPs), with an average diameter of about 4-10 nm, were produced by the proteic sol-gel method and successfully doped into the active layer of poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) organic solar cells. Pristine and CoFe2O4 NPs-doped blends of P3HT:PCBM were dispersed in
Mat. Res.. Publicado em: 13/01/2020
-
3. Review of Power Device for Solar-Powered Aircraft Applications
ABSTRACT This paper reviews various power device components of solar-powered aircraft such as photovoltaic (PV) cells, maximum power point tracker (MPPT) and rechargeable batteries. The various power device components were highlighted, and the ones applicable to aircraft were analyzed, based on criteria as efficiency for photovoltaic cells; energy densities
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
4. Application of Zinc Oxide in Hybrid Solar Cells Using a P3HT and P3OT Polymer Junction as Charge Carrier
Hybrid solar cells show an increasing number in researches due to its low cost and easy of production. They are composed by and organic material and a semiconductor oxide. The aim of this paper was to synthesis and characterize zinc oxide by coprecipitation and apply it in a hybrid solar cell that uses a P3HT/P3OT copolymer as charge carrier. The cell was as
Mat. Res.. Publicado em: 01/07/2019
-
5. COMPARATIVE STUDY OF TiO2 AND ZnO APPLICATION IN HYBRID SOLAR CELLS USING COPOLYMER P3OT/P3MT
Hybrid inorganic-organic solar cells are an attractive alternative energy source because of their low-cost production and ability to make use of a large amount of solar radiation available. This work aims to evaluate different solar cells composed of TiO2 and ZnO with P3OT/P3MT copolymer. Layers of semiconductor oxides were deposited on transparent fluorine-
Quím. Nova. Publicado em: 02/05/2019
-
6. DISEÑO Y CARACTERIZACIÓN TEÓRICA DE MATERIALES FOTOACTIVOS EFICIENTES BASADOS EN DERIVADOS DE NAFTOPIRROL Y DE NAFTOTIOFENO PARA CELDAS SOLARES ORGÁNICAS
In this research we have designed electron donors D-π-A type containing two different π fragments to obtain naphthopyrrole (D-NPR-A) and naphthotiophene (D-NTP-A) derivatives, proposed for the use in organic bulk hetero-junction (BHJ) solar cells (OSCs). These derivatives were characterized by DFT and TD-DFT calculations. For all the electron donors the an
Quím. Nova. Publicado em: 2016-08
-
7. CÉLULAS SOLARES SENSIBILIZADAS POR CORANTES NATURAIS: UM EXPERIMENTO INTRODUTÓRIO SOBRE ENERGIA RENOVÁVEL PARA ALUNOS DE GRADUAÇÃO
An interesting practical experiment about the preparation of dye–sensitized solar cells (DSSC) using natural dyes were carried out by the undergraduate students in the chemistry course at UNICAMP . Natural dyes were extracted from blueberries (Vaccinium myrtillus L.), jabuticabas (Myrciaria cauliflora), raw and cooked beets (Beta vulgaris L.), and annattos
Quím. Nova. Publicado em: 2015-12
-
8. Aplicação do corante da casca da berinjela em células solares fotossensibilizadas. / Application of dye from the peel of eggplant in photosensitizer in solar cells.
Despite the efficiency of conventional solar cells reach about 20%, the cost of producing electricity using photovoltaic panels about 42 cents per kWh is still much higher than the cost of power generated by hydroelectric, 8 cents per kWh. Given the high cost of producing solar panels, woke up the interest in solar cells using dyes fotoexcitáveis known as G
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/02/2011
-
9. Polyol-polyesther matrices containing phthalocyanine derivatives macrocilces / Derivados de ftalocianina em sistemas poliméricos poliéster-poliol
Phthalocyanines are planar macrocycles with the presence of a central metal ion, formed by bridges of nitrogen and substituent groups in the aromatic rings adjacents. A large number of (PI) electrons, molecular symmetry and the possibility to coordinate different metals in nitrogen central atoms allows the use of these compounds in optical devices, light emi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/05/2010
-
10. Desenvolvimento de uma metodologia de fabricação de transistores de filmes finos orgânicos. / Development of a manufacturing methodology for organic thin film transistors.
In this work, it is presented a methodology for organic thin-film transistor (OTFT) fabrication. Poly(3-hexylthyophene) (P3HT):[6,6]-phenyl-C61-butyric acidmethyl ester (PCBM) bulk heterojunction solar cells were studied for their maximum power conversion efficiency (PCE) around 5 %. Efficiencies evolution in time from 10-6 to 1.7 % show the difficulties inv
Publicado em: 2010
-
11. Estudo atomístico da formação de interfaces orgânico-inorgânico: Tiofenos sobre óxido de titânio / Atomistic study of the formation of organic-inogarnic interfaces: thiophenes over titanium oxide
No estudo de sistemas híbridos orgânico-inorgânico, o uso de materiais como polímeros conjugados e óxidos de metal de transição tem despertado grande interes- se. Em particular, destacam-se sistemas compostos de tiofenos e óxido de titânio, que encontram uma importante aplicação em células solares. Para um melhor entendimento da interação entre
Publicado em: 2008
-
12. Sol-Gel TiO2 thin films sensitized with the mulberry pigment cyanidin
TiO2 films have various applications, among them solar cells and photodegradation of pollutants. In this study, we investigated TiO2 films functionalized with the organic dye cyanidin extracted from black mulberry (Morus nigra). The TiO2 was functionalized by the sol-gel method and the film was deposited on glass substrates by dip-coating. Our aim was to inv
Materials Research. Publicado em: 2007-12