Optoelectronic Devices
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Wavelength-Selective Near Unity Absorber Based on Fabry-Pérot Nanoresonators
Abstract We proposed and analyzed a planar narrow-band absorber based on a bi-layer metal/dielectric structure. The planar absorber uses the Fabry-Pérot resonance and the inherent loss of the metals, for maximum light absorption in the range of the electromagnetic spectrum visible to the near infrared. The absorption resonance peak can be shifted to other r
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
2. Preparation of Fluorescent Carbon-Based Dots from Waste Tire Pyrolysis
The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbon-based dots (CBD) from carbon black (CBL) derivatives of tires is described. For this, the CBL was treated with different acids to produce CBL1 and CBL2 particles sus
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. Estudio Ab-initio de propiedades estructurales, elásticas y electrónicas de nanohilos core/shell
ABSTRACT This Zinc oxide (ZnO) is widely used in different electronic devices due to its thermal, electronic, and piro-piezoelectric properties. Some of these properties are noticeable improvement at the nanoscale, specially when ZnO together with other material create heterostructures. Recently, core/shell nanowires have been synthesized in order to raise t
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Propiedades físicas y cristalinas del Cd1-xZnxTe (0 ≤ x ≤ 1)
ABSTRACT Cd1-xZnxTe (0 ≤ x ≤ 1) and ZnTe are II-VI semiconductors, which are used in single crystalline structure to improve their crystalline and electrical properties. The CZT and ZnTe must possess high crystalline and electrical quality to be used, the first in x or γ-ray detectors, and as substrates for suitable epitaxial films for detecting IR radi
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
6. Dynamic Digital Holography for recording and reconstruction of 3D images using optoelectronic devices
Abstract In this work, we present the optical recording and reconstruction of dynamic 3D digital holograms using optoelectronic devices. Digital Holography technique allows recording and reconstruction of three-dimensional images of real objects, since a hologram presents both the intensity and phase information about the object. The experimental implementat
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-09
-
7. Growth of Large Size Lithium Niobate Single Crystals of High Quality by Tilting-mirror-type Floating Zone Method
Large size high quality LiNbO3 single crystals were grown successfully by tilting-mirror-type floating zone (TMFZ) technique. The grown crystals were characterized by X-ray diffraction, etch pits density measurement, Impedance analysis, Vibrating sample magnetometry (VSM) and UV-Visible spectrometry. The effect of mirror tilting during growth on the structur
Mat. Res.. Publicado em: 28/03/2016
-
8. Radiation Induced Synthesis of In2O3Nanoparticles - Part II: Synthesis of In2O3 Nanoparticles by Thermal Decomposition of Un-irradiated and γ-irradiated Indium Acetylacetonate
AbstractPure cubic phase, In2O3 nanoparticles with porous structure were synthesized by solid state thermal oxidation of un-irradiated and γ-irradiated indium acetyl acetonate in presence and absence of sodium dodecyl sulphate as surfactant. The as- synthesized In2O3nanoparticles were characterized by X-ray diffraction (XRD), fourier transformation infrared
Mat. Res.. Publicado em: 2015-10
-
9. CARACTERIZAÇÃO DE NANOFIOS DE GERMÂNIO SINTETIZADOS UTILIZANDO COBRE COMO CATALISADOR
This paper presents reliable synthesis of germanium nanowires by the vapor-liquid-solid method using copper as an alternative catalyst to gold, the most commonly used metal. The morphological study showed long range single-crystalline germanium nanowires with diamond structure and diameters ranging from 20 nm to 80 nm and lengths in tenths of a micrometer
Quím. Nova. Publicado em: 2015-07
-
10. Nanoelectronic Devices Based on Carbon Nanotubes
ABSTRACT: Carbon nanotubes are possible building blocks in the development of new generation of electronic devices. The carbon nanotubes allow one fabrication of devices using nanometric scales. They can be used in projects of a wide range of electronic and optoelectronic components such as diodes, transistors and interconnection elements, among others. This
J. Aerosp. Technol. Manag.. Publicado em: 2015-03
-
11. Development of Electrical Conduction with Beryllium Doping of CdO Nanostructure thin Films
The objective of the present investigation is to study the effect of beryllium doping on the structural, optical, and electrical properties of CdO, focusing on the improvement of carrier mobility (μ) that accompanied with high electrical conductivity and good optical transparency in the near-infrared region. Thus, nanocrystallite Be-doped CdO films were pre
Mat. Res.. Publicado em: 2015-02
-
12. Photo-Induced conductivity of heterojunction GaAs/Rare-Earth doped SnO2
Rare-earth doped (Eu3+ or Ce3+) thin layers of tin dioxide (SnO2) are deposited by the sol-gel-dip-coating technique, along with gallium arsenide (GaAs) films, deposited by the resistive evaporation technique. The as-built heterojunction has potential application in optoelectronic devices, because it may combine the emission from the rare-earth-doped transpa
Mat. Res.. Publicado em: 23/04/2013