Optical Properties
Mostrando 25-36 de 1037 artigos, teses e dissertações.
-
25. Size and shape-controlled nanomaterials based on modified polyol and thermal decomposition approaches. A brief review.
Abstract: Since its inception in 2007, the Colloidal Materials Group, one of the research groups in nanotechnology of the Institute of Chemistry of São Carlos (IQSC) at University of São Paulo (USP) carries out studies related to the development of syntheses methods of nanoparticles and multifunctional nanostructured systems. Our works search new synthesis
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
26. Metallic Phthalocyanines: impact of the film deposition method on its supramolecular arrangement and sensor performance
Abstract This short review gives a concise overview of the impact of deposition methods on the supramolecular arrangement of metallic phthalocyanine films and their applications. Primarily, an introduction about the possible phthalocyanine molecular structures and derivatives obtained from modification on the phthalocyanine rings was presented. The possibili
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
27. Characterization of Different Surface Layers Produced by Solid Boron-Nitro-Carburizing Thermochemical Treatment on AISI 1020
The aim of this study is to obtain and characterize surface layers on low carbon steel with the pack boron-nitro-carburizing process. Different mixtures of commercial powders (Turbonit® and Ekabor®) were used to investigate the case properties, microstructure and phases formation on AISI 1020 steel. A series of experiments were conducted in solid medium wi
Mat. Res.. Publicado em: 04/11/2019
-
28. Transmissive to Dark Electrochromic and Fluorescent Device Based on Poly(fluorene-bisthiophene) Derivative
Films of a poly(fluorene-bisthiophene) derivative, named PFBT, were electrodeposited onto indium tin oxide (ITO) electrodes and their electrochromic and fluorescence properties were investigated. Such films displayed color variation from yellow, in the neutral state, to green, in the oxidized state, as shown by tracking of the CIE (Commission Internationale
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
29. (Bio)conjugation Strategies Applied to Fluorescent Semiconductor Quantum Dots
Quantum dots (QDs) are semiconductor nanocrystals, which present unique photophysical properties, enabling their application as new fluorescent platforms for biomedical sciences. Colloidal QDs are end-capped with organic or inorganic compounds, not only to prevent their agglomeration but also to provide reaction sites for the attachment of targeting (bio)mol
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
30. Effect of Solid Solution Temperature on Microstructure and Corrosion Resistance of CoNiCrMo Alloy
Influence of solid solution temperature on microstructures and corrosion properties of CoNiCrMo alloy were investigated by means of optical microscopy (OM), scanning electron microscope (SEM) and electronic differential system. The corrosion resistance of CoNiCrMo alloy in 0.9%NaCl aqueous solution was also investigated. The results indicated that with the i
Mat. Res.. Publicado em: 24/10/2019
-
31. Interplay between Near-Field Properties and Au Nanorod Cluster Structure: Extending Hot Spots for Surface-Enhanced Raman Scattering
Materials science has observed a continuous increase in the use of metal nanoparticles in a wide range of studies, from fundamental physics to technological applications such as photocatalysis and optical communication devices. This broad scope has the same fundamental origin, the localized surface plasmons, whose excitation leads to strong light confinement
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
32. Restorative Possibilities Using Zirconia Ceramics for Single Crowns
Resumo Dois casos clínicos são apresentados para explorar as diferenças técnicas e discutir as vantagens e desvantagens de se utilizar zircônia com cerâmica estratificada ou monolítica para confeccionar coroas unitárias. O primeiro caso descreve os passos clínicos na confecção de uma coroa monolítica no segundo pré-molar esquerdo utilizando uma
Braz. Dent. J.. Publicado em: 07/10/2019
-
33. Effect of Ca Content on Properties of Extruded Mg-3Zn-0.5Sr-xCa Alloys for Medical Applications
Mg-3Zn-0.5Sr-xCa(wt.%) (x=0, 0.2, 0.5) alloys were fabricated by casting and hot extrusion. X-ray diffraction (XRD) and optical microscopy observation showed that the microstructure of Mg-3Zn-0.5Sr-xCa alloys was composed of α-Mg matrix and Mg17Sr2 phase precipitated along grain boundaries. The tensile strength of the alloy increased from 255MPa to 305MPa w
Mat. Res.. Publicado em: 30/09/2019
-
34. Wood basic density effect of Eucalyptus grandis in the paper making
ABSTRACT The basic density is the main technical property of the wood due to the fact of the easy determination and correlation with the others wood properties. In this article, it was evaluated wood chips from a five-years-old Eucalyptus grandis in three different silvicultural treatments for pulp and paper production. First, a conventional kraft pulping wa
Matéria (Rio J.). Publicado em: 16/09/2019
-
35. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
36. Análise comparativa entre a têmpera e partição versus a têmpera e revenimento para o aço SAE 4340
RESUMO Um novo tratamento térmico tem sido pesquisado recentemente, cuja denominação é têmpera e partição (T&P), com o intuito de criar aços com austenita estável em sua microestrutura. Inicialmente, esse tratamento foi realizado em aços de alto silício, não obstante, seu potencial alcança outros diversos materiais como os de baixa liga contendo
Matéria (Rio J.). Publicado em: 16/09/2019