Optical Characterization
Mostrando 13-24 de 467 artigos, teses e dissertações.
-
13. Moringa oleifera seed as a natural coagulant to treat low-turbidity water by in-line filtration
Resumo O objetivo deste estudo é avaliar o uso de semente de Moringa oleifera (MO) como um coagulante natural para remoção de turbidez e cor aparente no tratamento de água de abastecimento com baixa turbidez inicial via técnica de filtração direta em linha. A morfologia e carga de superfície foram investigadas por técnicas de caracterização como m
Rev. Ambient. Água. Publicado em: 25/11/2019
-
14. Synthesis and characterization of microalgae fatty acids or Aloe vera oil microcapsules
Abstract It’s proposed a single methodology for the encapsulation of Aloe vera oil or microalgae fatty acids using the complex coacervation process between gelatin and gum arabic. Although a very recurrent method, it is not trivial to establish a single coacervation methodology to encapsulate different compounds. The optimal synthesis conditions, that resu
Polímeros. Publicado em: 04/11/2019
-
15. Characterization of Different Surface Layers Produced by Solid Boron-Nitro-Carburizing Thermochemical Treatment on AISI 1020
The aim of this study is to obtain and characterize surface layers on low carbon steel with the pack boron-nitro-carburizing process. Different mixtures of commercial powders (Turbonit® and Ekabor®) were used to investigate the case properties, microstructure and phases formation on AISI 1020 steel. A series of experiments were conducted in solid medium wi
Mat. Res.. Publicado em: 04/11/2019
-
16. Doxycycline release and antibacterial activity from PMMA/PEO electrospun fiber mats
Abstract Objective: To investigate the use of polymethyl methacrylate (PMMA) electrospun fiber mats containing different amounts of polyethylene oxide (PEO) as a doxycycline delivery system and to test antibacterial activity against an oral pathogen. Methodology: PMMA powders or PEO (mol wt 200 Kd) (10,20,30% w/w/) were dissolved in N, N-dimethylformamide
J. Appl. Oral Sci.. Publicado em: 07/10/2019
-
17. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
18. Adding value to polystyrene waste by chemically transforming it into sulfonated polystyrene
ABSTRACT Polystyrene (PS), one of the most used polymers in everyday life, has a low recycling rate due to its inexpensive virgin resin. In order to make polystyrene waste (WPS) recycling advantageous, it is possible to change it chemically, introducing heteroatoms in the polymer chain thus transforming the waste into a material with more added value. In thi
Matéria (Rio J.). Publicado em: 16/09/2019
-
19. Characterization of Li2O-Al2O3-SiO2 glass-ceramics produced from a Brazilian spodumene concentrate
Resumo Vitrocerâmicas do sistema LAS (Li2O-Al2O3-SiO2) com elevada resistência ao choque térmico foram obtidas com sucesso com o uso de um concentrado de espodumênio brasileiro como principal matéria-prima (80%-70% em massa). Duas composições (Li2O.Al2O3.nSiO2) foram produzidas com n= 2 e 4, próximas às composições estequiométricas das fases eucr
Cerâmica. Publicado em: 15/08/2019
-
20. Microstructural Evolution Due to One Thermal Cycle in a Superduplex Stainless Steel ASTM A890/A890M - Grade 6A in the As-Weld and Post-Weld Heat Treatment Conditions
During welding of the superduplex stainless steels are exposed to thermal cycles, allowing precipitation of deleterious phases as well as unbalance as the ferrite and austenite phases. This work analyzed the microstructural changes taking place on a plate ASTM A890/A890M - grade 6A steel submitted to arc welding one welding of pass conducted on a flat surfac
Mat. Res.. Publicado em: 08/08/2019
-
21. Development, characterization and viability study of probiotic microcapsules produced by complex coacervation followed by freeze-drying
RESUMO: A técnica de coacervação complexa foi utilizada para a produção de microcápsulas contendo Lactobacillus acidophilus La-5 em gelatina e goma arábica seguida de secagem por liofilização. As microcápsulas foram caracterizadas por microscopia óptica e eletrônica de varredura, assim como a resistência dos probióticos frente à liberação �
Cienc. Rural. Publicado em: 10/07/2019
-
22. Microstructure evolution during the extrusion of a 6351 aluminum alloy tube
Abstract The aluminum alloy AA 6351 is a precipitation hardened alloy of the Al-Mg-Si system, additionally containing Mn and Fe. In this study, the microstructural characterization during processing of a thick wall extruded AA 6351 tube was carried out. Several complementary techniques for microstructural characterization were used, such as polarized light o
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
23. New insights into the detection and molecular characterization of Cryptosporidium with emphasis in Brazilian studies: a review
ABSTRACT Cryptosporidium spp. is a pathogenic protozoan present in the gastrointestinal tract of several hosts. This protozoan was originally classified as within the Coccidia Class and has recently been reclassified to gregarine based on studies that observed the evolutionary phases from the process of excision and sequencing of the 18S rRNA gene. Molecular
Rev. Inst. Med. trop. S. Paulo. Publicado em: 19/06/2019
-
24. Análise das Propriedades Mecânicas de Juntas de Aço Carbono Estrutural Soldadas pelo Processo Arco Submerso com os Arcos Simples e Duplo (Tandem-Arc)
Resumo Diante de um cenário econômico onde a concorrência é cada vez mais acirrada, a busca por processos, técnicas e equipamentos de soldagem que proporcionem ganhos na produtividade é uma exigência para garantir a competitividade das empresas no mercado. Com o desenvolvimento e a adoção de novas tecnologias é possível inovar os processos convenc
Soldag. insp.. Publicado em: 13/06/2019