Optic Characterization
Mostrando 1-12 de 43 artigos, teses e dissertações.
-
1. Effect of pH on Optic and Structural Characterization of Chemical Deposited AgI Thin Films
AgI thin films were grown on amorphous commercial glass substrates with chemical bath deposition (CBD) at different pH values (2, 3, 4, 5, 6), 6 hours deposition time and 60 °C. The structure of the nanocrystals was characterized by X-ray diffraction (XRD). The ratio of Ag+ and I- ions changed the crystalline structures. The presence of the Ag+ ions produce
Mat. Res.. Publicado em: 31/08/2017
-
2. Preparation and Characterization of Nanoscale Cobalt Blue Pigment for Ceramic Inkjet Printing by Sol-Gel Self-Propagating Combustion
Cobalt blue pigments were prepared by self-propagating combustion followed by sol-gel method using aluminum nitrate and cobalt nitrate as the raw material. X ray diffraction (XRD), scanning electron microscopy (SEM), fiber optic spectrometer and colorimetric analysis were used to investigate the effect of reaction temperature, metal ion concentration and dis
Mat. Res.. Publicado em: 27/07/2017
-
3. Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy
ABSTRACT The Ni- based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, despite its unique properties and extensive use, its wear resistance is in some cases unsatisfactory. In this study, Inconel
Matéria (Rio J.). Publicado em: 22/06/2017
-
4. Caracterização motora e funcional da paraplegia espástica, atrofia óptica e neuropatia periférica (síndrome Spoan) / Functional and motor characterization of spastic paraplegia, optic atrophy and peripheral neuropathy
INTRODUCTION: Spoan syndrome is a complex form of spastic paraplegia of recessive inheritance recently identified in individuals from Southwest of Rio Grande do Norte state. Clinical features are characterized by congenital optic atrophy, progressive spastic paraplegia, and axonal neuropathy, resulting in severe handicap. Phenotypic description of this disea
Publicado em: 2009
-
5. Síntese, caracterização e aplicação de polímeros conjugados derivados de ferroceno e de bisfenol-A / Synthesis, characterization and application of conjugated polymers derived from ferrocene and bisphenol-A
Owing to the current interest in organometallic polymers and their applications, a group of conducting polymers containing ferrocene in the main chain was synthesized aiming the study of their magnetoresistive, magneto-optic and redox properties. The following polymers were prepared via McMurry method: poly(1,1-ferrocenylenevinylene) (PFV) and poly[1,1-ferro
Publicado em: 2008
-
6. Estudo das transformaÃÃes de fase em Pseudo â ZTAs para aÃo API 5L X-70 visando desenvolvimento de dispositivo substrato
The microstructure transformation of structural steel has been studied from continuous cooling in metallic means to simulate the microestrutural transformations in different places in a HAZ (Heat Affected Zone). The studied material is Steel API 5L X70, largely used in piping in the Petrochemical Industries for its hight mechanical resistance and low weight,
Publicado em: 2008
-
7. Caracterização estrutural de agregados formados pelo antifúngico anfotericina B e lipídios catiônicos: uma possível formulação farmacológica / Structural characterization of aggregates formed by the antifungal drug amphotericin B and cationic lipids: a possible pharmacological formulation
Amphotericin B (AB) is a natural antibiotic, produced by Streptomyces nodosus, with a very potent antifungal activity. It is a polyene macrolide molecule, isolated in 1953. Since then, it has been extensively used in the treatment of systemic mycotic infections. Considering AB very low solubility in aqueous medium, it has been largely used as an aqueous disp
Publicado em: 2008
-
8. Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições
The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally invol
Publicado em: 2008
-
9. Estudo de ovos de quatro espécies do gênero Meccus (Hemiptera, Reduviidae, Triatominae), vetores da doença de Chagas
The objective of this work was to analyze the morphological, morphometrical, and histological characteristics of eggs of four triatomine bugs species still not studied, in order to understand phylogenetic aspects and to facilitate parameters used in taxonomy, with the purpose of a specific and generic characterization of these vectors in public health. The e
Memórias do Instituto Oswaldo Cruz. Publicado em: 2007-02
-
10. Preparation and study of photodegraded polimeric matrix composites for photovoltaic cells encapsulation / Preparação e estudo da fotodegradação de compósitos de matriz polimérica para encapsulamento de células fotovoltaicas
The solar cells components are made off blades and metallic and ceramic semiconductors films. Such materials are not inert to the terrestrial atmosphere action. In this context, important part of the fotovoltaics modules production includes stages for the cells protection. These will have to be preserved from aggressive actions of the environment, for what t
Publicado em: 2007
-
11. "Caracterização estrutural e óptica de elastômeros dopados com ferrofluidos" / Optical and Structural Characterization of Elastomers Dopeds with Ferrofluids
This work aims the structural, mechanical and optical characterization of urethane/urea elastomers (PU/PBDO), based on polypropylene oxide and polybutadiene diol, pure, after swelling in toluene and doped with ferrofluid. The ratios in weight % of PU and PBDO used are 40/60, 50/50, 60/40 and 80/20. The structural analysis were made through of polarized light
Publicado em: 2007
-
12. Caracterização morfo-fisiológica e identificação de fragmentos de cDNA diferencialmente expressos de tegumentos de sementes de soja com permeabilidade contrastante / Morpho-physiologic characterization and identification of fragments of cDNA distinguishing expressed in soybean seed coat with contrasting permeability
Some works have reported the existence of contrasting soybean genotypes for physiological quality of seeds. There are such differences because of the presence of seeds with total or partial impermeability for water absorption into the coat that make them less susceptible to mechanical damages, weather adversities, deterioration by humidity and pathogen occur
Publicado em: 2007