Open Circuit Potential
Mostrando 1-12 de 91 artigos, teses e dissertações.
-
1. Boosting the Photocurrent of the WO3/BiVO4 Heterojunction by Photoelectrodeposition of the Oxy-Hydroxide-Phosphates Based on Co, Fe, or Ni
Here we investigated the photoelectrodeposition of oxygen-evolving catalysts (OECs) based on oxy-hydroxides-phosphates of Co, Fe, or Ni (CoPi, FePi, and NiPi) on the WO3/BiVO4 heterojunction and their activity in water oxidation. The OECs were deposited by cycles of (i) open-circuit potential (OCP) and (ii) applying a potential positive enough to oxidize the
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Aqueous Extract of Cumaru (Dipteryx odorata) Seeds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution
The corrosion inhibition of mild steel by aqueous extract of cumaru (Dipteryx odorata) seeds and its high molecular weight fraction (HMWF) was investigated in 1 mol L-1 HCl solution. The study was carried out through gravimetric essays, open circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance analyses, as wel
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
3. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
4. A New Electrochemical Platform Based on a Polyurethane Composite Electrode Modified with Magnetic Nanoparticles Coated with Molecularly Imprinted Polymer for the Determination of Estradiol Valerate in Different Matrices
A polyurethane composite electrode modified with magnetic nanoparticles (mag; Fe3O4) coated with molecularly imprinted polymers (MIPs) was developed for the electrochemical determination of estradiol valerate. Chemical and morphological analyses of the mag-MIP were performed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (E
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
5. Aço carbono 1040 como indicador de agressividade do solo e da pasta de cimento em sistemas de ancoragem de linhas de transmissão
RESUMO O encapsulamento de hastes de âncora em pasta de cimento reduz o contato dos materiais metálicos com os ambientes agressivos, em torres estaiadas de linhas de transmissão de energia elétrica. Contudo, ainda são reportados casos de falha prematura devido à corrosão do sistema de ancoragem. O íon cloreto é considerado um dos principais respons�
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Corrosion Behavior of AA7075-T73 Aluminum Alloy During Machining of Aeronautical Components
Corrosion of AA7075-T73 aluminum alloy during machining process was studied. An experimental device was proposed in order to simulate machining procedure. A design of experiments - DOE was used in order to evaluate what process parameter is significant. Some electrochemical tests based on open-circuit potential vs time measurements and potentiodynamic polari
Mat. Res.. Publicado em: 01/07/2019
-
7. HPGR as alternative to fused alumina comminution route: an assessment of circuit simplification potential
Abstract A considerable portion of energy consumption and, as a consequence, operational costs in mineral processing, is associated with comminution. High Pressure Grinding Rolls (HPGR) are appealing for their energy efficiency and resulting lower operating costs. This article evaluates this technology as an alternative to the conventional fused alumina comm
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
8. Comportamento da corrosão microbiológica do aço duplex com aplicação de sais de quaternário de amônio
RESUMO A corrosão microbiológica tem causado diversos prejuízos para variados segmentos industriais que utilizam os materiais metálicos em seus sistemas. Uma forma de minimizar e até mesmo controlar os problemas causados pela corrosão microbiológica tem sido a aplicação de biocidas nestes sistemas. Neste trabalho, a corrosão microbiológica do aço
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. On the Global and Localised Corrosion Behaviour of the AA2524-T3 Aluminium Alloy Used as Aircraft Fuselage Skin
The aim of this work was to study the corrosion process of new aluminium alloy AA2524-T3 (Solution Heat Treated and Cold Worked), which is a promising substitute of the base line AA2024-T3 for aircrafts fabrication, by global and localised techniques in sodium chloride medium (0.05 mol L-1 NaCl). The open circuit potential results revealed a stochastic evolu
Mat. Res.. Publicado em: 14/01/2019
-
10. Efecto de la composición sobre el comportamiento frente a la corrosión de aceros inoxidables austeníticos y martensíticos
ABSTRACT The aim of this work is to study the electrochemical behavior of a series of stainless steels in NaCl solution (10000 ppm Cl-) at room temperature. Considering the differences in structures (austenitic and martensitic) and the composition of alloys, a relationship between their electrochemical behavior and PREN (Pitting resistance equivalent number)
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Formación electroquímica de películas de polipirrol sobre Nitinol a partir de soluciones de ácido sulfosuccínico
ABSTRACT In this work the electrosynthesis of polypyrrole (PPy) on Nitinol from solutions of sulfosuccinic acid (0,25 M) and pyrrole (0,25 M) was studied. The PPy was formed potentiostatically in solutions of pH 1 and 7. As far as we know, this is the first time that the electrodeposition of PPy is carried out in the presence of sulfosuccinic acid. The morph
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. AVALIAÇÃO DA ADSORÇÃO E ESTUDO ELETROQUÍMICO DE CÉLULAS SOLARES PRODUZIDAS COM TiO2 E CORANTE EXTRAÍDO DO HIBISCUS
Dye-sensitized solar cells using natural dyes have lower cost when compared to ruthenium-based dyes. This paper aims to evaluate, electrochemically, solar cells composed of TiO2 with dye extracted from the Hibiscus(var. Sabdariffa) and propose an adsorption model capable of predicting the adsorption mechanism of the dye on the semiconductor surface. The char
Quím. Nova. Publicado em: 2018-05