Oil Well Drilling
Mostrando 1-12 de 39 artigos, teses e dissertações.
-
1. A statistical solution for cost estimation in oil well drilling
Abstract Drilling operations must be preceded by adequate planning, fulfilling the path to produce hydrocarbons at low and competitive costs. Conventional well planning is based on the personal experience of project engineers, which use information from offset wells to estimate the performances in future wells. This article reviews and discusses a published
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
2. Toxicity of Drilling Waste from Oil Wells on Oligochaeta
ABSTRACT The most abundant and critical elements in residues from well drilling and prospecting are barium and sodium. Ecotoxicological tests have been used to evaluate the toxicity caused by toxic substances present in the soil. The objective of the present study was to verify the effect of the application of drilling residue from oil wells on Oligochaeta
Floresta Ambient.. Publicado em: 06/08/2018
-
3. Study of Continuous Rheological Measurements in Drilling Fluids
Abstract Drilling an oil well involves using drilling fluids that perform cleaning and cooling functions, but that most importantly maintain the fluids of the geological formation contained by hydraulic pressure. A fundamental role in predicting the hydraulic pressure of the well consists of monitoring the fluid’s rheological behavior. This paper summarize
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
4. Rheological Characterization of Bentonite Dispersions with Xanthan for Oil Well Drilling Fluids
Shear tests using a coaxial cylinders viscometer were performed in order to determine the rheological and thixotropic properties of xanthan gum dispersions with sodium bentonite in the presence of high salt concentrations of sodium and calcium chlorides. The dispersions rheology with different temperatures and concentrations of NaCl, CaCl2 and xanthan gum we
Mat. Res.. Publicado em: 05/06/2017
-
5. SMART MONITORING AND DECISION MAKING FOR REGULATING ANNULUS BOTTOM HOLE PRESSURE WHILE DRILLING OIL WELLS
Abstract Real time measurements and development of sensor technology are research issues associated with robustness and safety during oil well drilling operations, making feasible the diagnosis of problems and the development of a regulatory strategy. The major objective of this paper is to use an experimental plant and also field data, collected from a basi
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
6. L'INFORMATION BREVET AU SERVICE DE L'INDUSTRIE PÉTROLIÈRE : CAS DE CONCEPTION ET D'OPTIMISATION DES TRÉPANS PAR INGÉNIERIE INVERSEE
The aim of this paper is to show the results of a study originally conducted for an Algerian State-Owned Company ENSP (Manufacturing Branch / formerly ALDIM) specialized in drill bits manufacturing. We show innovation opportunities offered by the use of reverse engineering assisted by patent information in the oil industry. This applied research, mainly base
JISTEM J.Inf.Syst. Technol. Manag.. Publicado em: 2014-09
-
7. In situ biosurfactant production and hydrocarbon removal by Pseudomonas putida CB-100 in bioaugmented and biostimulated oil-contaminated soil
In situ biosurfactant (rhamnolipid) production by Pseudomonas putida CB-100 was achieved during a bioaugmented and biostimulated treatment to remove hydrocarbons from aged contaminated soil from oil well drilling operations. Rhamnolipid production and contaminant removal were determined for several treatments of irradiated and non-irradiated soils: nutrient
Braz. J. Microbiol.. Publicado em: 2013
-
8. Química Sem Fronteiras: o desafio da energia
Coal, natural gas and petroleum-based liquid fuels are still the most widely used energy sources in modern society. The current scenario contrasts with the foreseen shortage of petroleum that was spread out in the beginning of the XXI century, when the concept of "energy security" emerged as an urgent agenda to ensure a good balance between energy supply and
Quím. Nova. Publicado em: 2013
-
9. Análise de desempenho de diferentes leis de controle de vibrações torcionais em colunas de perfuração de poços de petróleo / Performance analysis of different control laws for torsional vibrations in oil wells drillstrings
O fenômeno de stick-slip, no processo de perfuração de poços de petróleo, é propiciado pela interação entre broca e formação rochosa e pode dar origem a grandes oscilações na velocidade angular podendo provocar danos irreparáveis ao processo. Neste trabalho, analisa-se o desempenho de leis de controle aplicadas à mesa rotativa (responsável por
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/04/2012
-
10. DIAGNOSTICS OF OPERATIONAL PROBLEMS DURING OIL WELL DRILLING / DIAGNÓSTICOS DE PROBLEMAS OPERACIONAIS DURANTE A PERFURAÇÃO DE POÇOS DE PETRÓLEO
A perfuração de poços de petróleo é uma operação complexa e de elevado risco e custo financeiro. Com o passar dos anos o número de poços horizontais e de longo alcance perfurados aumentou consideravelmente devido à existência de reservatórios mais profundos e de difícil acesso, além da necessidade de se obter uma melhor eficiência na extraçã
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/10/2011
-
11. Análise dinâmica de colunas de perfuração de poços de petróleo usando controle linear de velocidade não-colocalizado / Dynamics of oilwell drillstrings using non-colocated linear velocity control
Este trabalho apresenta uma análise paramétrica da reposta dinâmica de colunas de perfuração de poços de petróleo com controle proporcional-integral de velocidade não colocalizado. A operação de perfuração de poços de petróleo e gás em águas profundas consiste na abertura de poços em solo rochoso através de uma broca cuja rotação é contr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/05/2011
-
12. Estudo do comportamento PVT de misturas de metano e fluidos de perfuração base éster / Study of the PVT behavior of methane and ester based drilling fluids mixtures
During conventional drilling operations, it is necessary to maintain the wellbore pressure greater than the reservoir pore pressure, otherwise a kick may occur. If the well control procedure is not effective during the circulation of the formation influx out of the well, a blowout could happen, which is a dangerous event concerning safety and environmental i
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/06/2010