Numerical Relation
Mostrando 13-24 de 146 artigos, teses e dissertações.
-
13. Direct Numerical Simulation Code Validation for Compressible Shear Flows Using Linear Stability Theory
ABSTRACT: In order to simulate compressible shear flow stability and aeroacoustic problems, a numerical code must be able to capture how a baseflow behaves when submitted to small disturbances. If the disturbances are amplified, the flow is unstable. The linear stability theory (LST) provides a framework to obtain information about the growth rate in relatio
J. Aerosp. Technol. Manag.. Publicado em: 07/05/2018
-
14. Modeling the creep behavior of GRFP truss structures with Positional Finite Element Method
Abstract This paper presents the development of a formulation, based on Positional Finite Element Method, to describe the viscoelastic mechanical behavior of space trusses. The numerical method used was chosen due to its efficiency in the applications concerning nonlinear numerical analyses. The formulation describes the positional variation over time under
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
15. DETERMINING PRODUCTION AND INVENTORY PARAMETERS: AN INTEGRATED SIMULATION AND MAVT APPROACH WITH TRADEOFF ELICITATION
ABSTRACT This study puts forward a multi-attribute decision model that determines good production and inventory parameter settings in make-to-stock (MTS) environments controlled by the Conwip (constant work-in-process) method. This model uses a discrete event simulation to evaluate the performance of a system in relation to work-in-process and a finished goo
Pesqui. Oper.. Publicado em: 2018-04
-
16. Finite element simulation of fracture in a restored premolar tooth using high aspect ratio elements
Abstract Introduction The term cracked tooth syndrome refers to an incomplete fracture of a vital posterior tooth that involves the dentin and occasionally extends into the pulp. There is a very limited number of publications trying to model dentin crack growth using numerical techniques. Therefore, it is essential to numerically model this phenomenon in o
Res. Biomed. Eng.. Publicado em: 19/03/2018
-
17. COMPUTING MAX FLOWS THROUGH CUT NODES
ABSTRACT In this work, the presence of cut nodes in a network is exploited to propose a competitive method for the multi-terminal maximum flow problem. The main idea of the method is based on the relation between cut-trees and cut nodes, which is observed in the context of sensitivity analysis on the variation of edges capacities. Computational experiments w
Pesqui. Oper.. Publicado em: 2017-09
-
18. Investigation on the Effects of Process Parameters on Laser Percussion Drilling Using Finite Element Methodology; Statistical Modelling and Optimization
Abstract In the present research, the simulation of the Nickel-base superalloy Inconel 718 fiber-laser drilling process with the thickness of 1mm is investigated through the Finite Element Method. In order to specify the appropriate Gaussian distribution of laser beam, the results of an experimental research on glass laser drilling were simulated using three
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
19. A Doubly Curved Axisymmetric Finite Element for Subsea Sandwich Domes
Abstract The paper focuses on the analysis of sandwich domes using a newly developed doubly curved axisymmetric sandwich finite element. The simple equivalent single layer finite element employs a cubic polynomial approximation for transverse displacement and meridional displacement. The present element accounts for the transverse shear strains of the facing
Lat. Am. j. solids struct.. Publicado em: 2016-07
-
20. Elasto-Plastic Stress Analysis in Rotating Disks and Pressure Vessels Made of Functionally Graded Materials
Abstract A new elastio-plastic stress solution in axisymmetric problems (rotating disk, cylindrical and spherical vessel) is presented. The rotating disk (cylindrical and spherical vessel) was made of a ceramic/metal functionally graded material, i.e. a particle-reinforced composite. It was assumed that the material's plastic deformation follows an isotropic
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
21. Estimation Uncertainties in the Optical Signal-to-Noise Ratio Network Optimization
In this work, we investigate the effects of estimation uncertainties in the optimization of the optical signal-to-noise ratio (OSNR) at the wavelength division multiplexing (WDM) optical networks. The OSNR optimization increases the network throughput and energy efficiency and it enables to minimize the number of retransmissions by higher layers. The OSNR op
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-03
-
22. Vibration Analysis of a Magnetoelectroelastic Rectangular Plate Based on a Higher-Order Shear Deformation Theory
Abstract Free vibration of a magnetoelectroelastic rectangular plate is investigated based on the Reddy's third-order shear deformation theory. The plate rests on an elastic foundation and it is considered to have different boundary conditions. Gauss's laws for electrostatics and magnetostatics are used to model the electric and magnetic behavior. The partia
Lat. Am. j. solids struct.. Publicado em: 2016-03
-
23. Health professionals identify components of the International Classification of Functioning, Disability and Health (ICF) in questionnaires for the upper limb
BACKGROUND: Several Brazilian studies have addressed the International Classification of Functioning, Disability and Health (ICF), but few have analyzed the knowledge of the health professionals with regards to the ICF. OBJECTIVE: To verify whether the classification of the items in the Brazilian-Portuguese versions of The Shoulder Pain and Disability In
Braz. J. Phys. Ther.. Publicado em: 19/01/2016
-
24. Dispersion of Love wave in an isotropic layer sandwiched between orthotropic and prestressed inhomogeneous half-spaces
Abstract An in-depth study has been carried out for the dispersion of Love waves in an isotropic elastic layer sandwiched between orthotropic and prestressed inhomogeneous elastic half-spaces. The inhomogeneities in density and rigidity of the lower half-space are space dependent and an arbitrary function of depth. Simple mathematical techniques are used to
Lat. Am. j. solids struct.. Publicado em: 2015-10