Numerical Non Linear Analysis
Mostrando 1-12 de 104 artigos, teses e dissertações.
-
1. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
2. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. Physical and geometric non-linear analysis using the finite difference method for one-dimensional consolidation problem
Abstract This article presents a numerical model based on the finite difference method for the physical and geometric non-linear analysis of a one-dimensional consolidation problem regarding a saturated, homogeneous and isotropic soil layer with low permeability and high compressibility. The problem is formulated by adopting the void ratio as the primary var
REM, Int. Eng. J.. Publicado em: 2019-06
-
4. Numerical analysis of truss systems with stiffened flattened end-bars
Abstract Circular hollow sections are usually used in long-span roof truss systems. One of the typology for connecting elements in such structures involves the flattening of bar ends. This article presents the numerical analysis of a plane truss composed of circular hollow sections, in which diagonal bars have flattened ends. In this sense, a new flattening
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
5. Numerical analysis of cold-formed double angles back-to-back under compression
Abstract Here-in, a numerical analysis based on the Finite Element Method (FEM) is proposed in order to investigate cold-formed steel back-to-back double angle structural behavior under compression. Considering non-linear analysis, an investigation was performed to analyze the influence of some aspects, such as the loading condition (concentric and eccentric
REM, Int. Eng. J.. Publicado em: 2017-12
-
6. Distortional Failure and DSM Design of Cold-Formed Steel S-Shaped Beams Under Uniform Bending
Abstract This work reports a numerical investigation on the distortional buckling/post-buckling behaviors, ultimate strength and Direct Strength Method (DSM) design of cold-formed steel S-beams, commonly used in industrial rack systems. The analyzed beams are single-span, under uniform bending, exhibiting two different end support conditions and 5 cross-sect
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
7. Modelling of Rocking and Sliding Effects in the Seismic Analysis of a Free-Standing Column
Abstract A study on the seismic response of a free-standing marble column, including rocking and sliding effects, is presented in this paper. The rocking-sliding model implemented for the development of the analyses corresponds to the basic theoretical and numerical simulation of the dynamic phenomenon. The assessment procedure adopted for the application of
Lat. Am. j. solids struct.. Publicado em: 2017-10
-
8. Elastoplastic Stability and Failure Analysis of FGM Plate with Temperature Dependent Material Properties under Thermomechanical Loading
Abstract The present paper explores the stability and failure response of elastoplastic Ni/Al2O3 functionally graded plate under thermomechanical load using non-linear finite element formulation based on first-order shear deformation theory and von-Karman’s nonlinear kinematics. The temperature dependent thermoelastic material properties of FGM plate are v
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
9. Non-Linear Three Dimensional Finite Elements for Composite Concrete Structures
Abstract The current investigation focused on the development of effective and suitable modelling of reinforced concrete component with and without strengthening. The modelling includes physical and constitutive models. New interface elements have been developed, while modified constitutive law have been applied and new computational algorithm is utilised. T
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
10. Nonlinear Vibration and Mode Shapes of FG Cylindrical Shells
Abstract The nonlinear vibration and normal mode shapes of FG cylindrical shells are investigated using an efficient analytical method. The equations of motion of the shell are based on the Donnell’s non-linear shallow-shell, and the material is assumed to be gradually changed across the thickness according to the simple power law. The solution is provided
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
11. Nonlinear Dynamics Analysis of FGM Shell Structures with a Higher Order Shear Strain Enhanced Solid-Shell Element
Abstract In this paper, non-linear dynamics analysis of functionally graded material (FGM) shell structures is investigated using the higher order solid-shell element based on the Enhanced Assumed Strain (EAS). With this element, a quadratic distribution of the shear stress through the thickness is considered in an enhancing part. Material properties of the
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
12. Numerical Analysis of Geometrically Non-Linear Behavior of Functionally Graded Shells
Abstract In this paper, a geometrically nonlinear analysis of functionally graded material (FGM) shells is investigated using Abaqus software. A user defined subroutine (UMAT) is developed and implemented in Abaqus/Standard to study the FG shells in large displacements and rotations. The material properties are introduced according to the integration points
Lat. Am. j. solids struct.. Publicado em: 2017