Numerical Models
Mostrando 13-24 de 707 artigos, teses e dissertações.
-
13. Structural models for analysis of reinforced concrete frame buildings with masonry infills
Resumo Este trabalho tem como objetivo o estudo do comportamento de pórticos de edifícios de concreto armado preenchidos com alvenaria frente às ações horizontais, empregando-se dois modelos estruturais: i) modelo de diagonal equivalente (MDE) e ii) modelo com elementos finitos bidimensionais para estado plano de tensões (MEF). No primeiro modelo, a al
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
14. Oblique penetration of tungsten alloy rod to finite-thickness metal plate
Abstract In order to study the critical ricochet velocity and critical penetration velocity of tungsten alloy rod obliquely penetrating a finite-thickness metal plate, experiment and numerical calculation of tungsten alloy rod impacting on homogeneous armor steel plate with a thickness of 30mm at an angle of 60° were carried out. Compared the experimental a
Lat. Am. j. solids struct.. Publicado em: 04/11/2019
-
15. Impact responses of slender composite plates for bird-strike testing of fan blades
Abstract Bird-strike failure of fan blades is one of the basic challenges for the safety of aircraft engines. Simplified slender blade-like plates are always used to evaluate the impact-induced damage mechanism at design stage. One undesirable issue is the failure at the root of clamped slender plates, which cannot recover the real case of twisted blades. Fo
Lat. Am. j. solids struct.. Publicado em: 04/11/2019
-
16. Large deflection and initial instability analysis of anisotropic plates by the generalized finite element method
Abstract This paper presents investigations laminated plates under moderately large transverse displacements and initial instability, through the Generalized Finite Element Methods - GFEM. The von Kármán plate hypothesis are used along with Kirchhoff and Reissner-Mindlin kinematic plate bending models to approximate transverse displacements and critical bu
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
17. HYBRID MANUFACTURING SYSTEM WITH THREE OPTIONS OF REMANUFACTURED AND DISPOSAL ITEMS
ABSTRACT This study is devoted to the optimal control of a hybrid manufacturing system with returned products after usage, represented as an infant mortality mode under a periodic review policy. Three hybrid models have been discussed; remanufacturing is continuous along the planning period (without a disposal option), remanufacturing happened in the second
Pesqui. Oper.. Publicado em: 23/09/2019
-
18. Numerical Study on Response Characteristics of Solid Rocket Pintle Motor
ABSTRACT: Pintle technology is currently a versatile technology used in a solid rocket motor (SRM) to control the desired thrust by changing the nozzle throat area, while effectively controlling the chamber pressure at the same time. The sudden movement of the pintle can induce rapid changes in the flow field and the occurrence of pressure oscillations insid
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
19. Beam-Column Joints Reinforcement Detailing Adequacy in Case of a Corner Column Loss-Numerical Analysis
Abstract This study investigates the behavior of reinforced concrete (RC) beam-column joints at the corner panel after a ground corner column loss scenario. The ductility of a frame is dependent on the ductility of its components, particularly its joints. Deficiency in joints performance can be related to an unexpected event. For example, the removal of a gr
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
20. A methodology to investigate the influence of the fillet radius on the buckling of integrally stiffened panels
Abstract The use of integrally stiffened panels (ISP's) in wings of small and medium-sized aircraft is frequent in aviation. These thin-walled structures are often subjected to compressive loads during their life-time and, although the finite element method has become an important tool for engineers to obtain the buckling load of structural members, some res
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
21. NUMERICAL AND COMPUTATIONAL ASPECTS OF COSMO-BASED ACTIVITY COEFFICIENT MODELS
ABSTRACT In the present work, some numerical and computational aspects of COSMO-based activity coefficient models were explored. The residual contribution in such models rely on the so called self-consistency equation. This equation does not have a closed-form solution and is usually solved by the successive substitution method. The performance of a classica
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
22. Deforestation impact on discharge regime in the Doce River Basin
Resumo A resposta hidrológica em bacias hidrográficas devido às mudanças do uso do solo pode ser avaliada por meio da construção de cenários, usando modelos hidrológicos. Nesse contexto, o objetivo desse trabalho foi analisar as consequências do desmatamento no comportamento hidrológico da bacia hidrográfica do rio Doce, que possui uma área de dr
Rev. Ambient. Água. Publicado em: 15/07/2019
-
23. Simulação do Processo de Soldagem Elétrica por Centelhamento de um Aço para Trilhos Ferroviários. Parte 1: Análise de Tensões Residuais Via Elementos Finitos
Resumo Trilhos longos, soldados pelo processo Flash Butt Welding (FBW), são a realidade das ferrovias brasileiras de média e alta carga por eixo. Embora apresentem características desejáveis do ponto de vista do comportamento dinâmico da via, as soldas são regiões de descontinuidade estrutural e mecânica onde se originam tensões residuais, e que est
Soldag. insp.. Publicado em: 27/06/2019
-
24. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019