Numerical Experimental Analysis
Mostrando 1-12 de 365 artigos, teses e dissertações.
-
1. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
2. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
4. Should ethanol be considered a treatment for COVID-19?
Abstract This paper describes the analysis of the effects of a frequency selective surface (FSS) on the characteristics of a microstrip line fed antenna with a bow-tie slot in the ground plane for operation in the frequency range 1 to 10 GHz. The use of the FSS is proposed to miniaturize the antenna structure and increase the number of resonance frequencies
Rev. Assoc. Med. Bras.. Publicado em: 2020-09
-
5. Effects of an FSS Reflector on a Microstrip Line Fed Bow-Tie Slot Antenna
Abstract This paper describes the analysis of the effects of a frequency selective surface (FSS) on the characteristics of a microstrip line fed antenna with a bow-tie slot in the ground plane for operation in the frequency range 1 to 10 GHz. The use of the FSS is proposed to miniaturize the antenna structure and increase the number of resonance frequencies
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
6. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
7. Structural reliability model considering mixed probabilistic and interval variables
Abstract Traditional probability-based structural reliability analysis method can only consider random uncertainties described by random distribution functions, which required sufficient experimental samples. On comparison, interval uncertainties can be more appropriate when lacking information. In realistic situations, several structural reliability models
Lat. Am. j. solids struct.. Publicado em: 17/01/2020
-
8. EXPERIMENTAL AND NUMERICAL ANALYSIS OF CHAOTIC ADVECTION AS AN EFFICIENT APPROACH TO MAXIMIZE HOMOGENEOUS LAMINAR MIXING IN A BATCH MIXER
Abstract In the present work, the impacts of effective parameters on the mixing of Stokes flows in a chaotic batch mixer are numerically and experimentally studied. The batch mixer consists of a container and two circular rotors where the rotors can rotate independently. To investigate the possibility of improving the mixing, the effect of non-constant speed
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
9. Numerical analysis of torsional tangent rigidity of reinforced concrete waffle slab
Resumo Este trabalho de investigação científica aborda a análise da rigidez tangente à torção de lajes nervuradas de concreto armado por meio de comparações da análise numérica com resultados de ensaios experimentais, cujo cálculo foi feito no programa ATENA. Tal programa foi desenvolvido especialmente para cálculo de estruturas de concreto arma
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
10. Ensaios de infiltração em modelos experimentais de coberturas secas utilizando cinzas de carvão mineral da Termelétrica do Pecém
RESUMO O elevado volume de cinzas de carvão mineral acumulado nas bacias de armazenamento da Usina Termoelétrica Energia Pecém resultou em uma demanda por pesquisas que propusessem diferentes formas de utilização desse resíduo, de modo a dar um destino final para este material. O uso das cinzas na forma de coberturas secas de depósitos de resíduos se
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Nonlinear numerical analysis of composite slabs with steel decking
Resumo O comportamento das lajes mistas é governado pelo cisalhamento longitudinal na interface entre o aço e o concreto, que é desenvolvido em lajes sob flexão simples. O método m-k e o método da interação parcial, utilizados no cálculo da resistência ao cisalhamento na interface aço-concreto de lajes mistas, são baseados em ensaios experimentai
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
12. Impact responses of slender composite plates for bird-strike testing of fan blades
Abstract Bird-strike failure of fan blades is one of the basic challenges for the safety of aircraft engines. Simplified slender blade-like plates are always used to evaluate the impact-induced damage mechanism at design stage. One undesirable issue is the failure at the root of clamped slender plates, which cannot recover the real case of twisted blades. Fo
Lat. Am. j. solids struct.. Publicado em: 04/11/2019