Numerical Approach
Mostrando 25-36 de 495 artigos, teses e dissertações.
-
25. HYBRID MANUFACTURING SYSTEM WITH THREE OPTIONS OF REMANUFACTURED AND DISPOSAL ITEMS
ABSTRACT This study is devoted to the optimal control of a hybrid manufacturing system with returned products after usage, represented as an infant mortality mode under a periodic review policy. Three hybrid models have been discussed; remanufacturing is continuous along the planning period (without a disposal option), remanufacturing happened in the second
Pesqui. Oper.. Publicado em: 23/09/2019
-
26. A New Hybrid Preconditioner for the Interior Point Method
RESUMO Este trabalho visa melhorar o cálculo da direção de busca no Método de Pontos Interiores primal-dual usando métodos iterativos precondicionados. Trata-se de uma abordagem híbrida que combina o precondicionador Fatoração Controlada de Cholesky e o precondicionador Separador. Esta abordagem tem mostrado bons resultados, entretanto, nesses préco
TEMA (São Carlos). Publicado em: 16/09/2019
-
27. Caracterização de publicações científicas sobre terapia ocupacional em periódicos não específicos da profissão no período de 2004 a 2015
Resumo Introdução Na terapia ocupacional os periódicos científicos têm sido objetos de estudos no intuito de se compreender as trajetórias e características da produção de conhecimento da profissão. No Brasil, a avaliação da produção bibliográfica difundida em periódicos tem sido pré-requisito para a inserção e a permanência de pesquisad
Cad. Bras. Ter. Ocup.. Publicado em: 22/08/2019
-
28. Modular modeling approach for FDM printed structures and piezo disks for metamaterial design
Abstract Research in metamaterials has recently gained interest in the field of noise and vibration control. The ability of creating band gap zones with minimum added mass is the main feature behind its success. In addition, the use of 3D printed parts, particularly the Fused Deposition Modeling (FDM), offers a practical solution for manufacturing parts with
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
29. Higher-order explicit time integration methods for numerical analyses of structural dynamics
Abstract In this article, third- and fourth-order accurate explicit time integration methods are developed for effective analyses of various linear and nonlinear dynamic problems stated by second-order ordinary differential equations in time. Two sets of the new methods are developed by employing the collocation approach in the time domain. To remedy some sh
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
30. Impact of primary hyperhidrosis on the life of physical education academics of a university in the Brazilian Northeast
Abstract Aim: To assess the prevalence, quality of life (QoL), and the damages caused by PH, in the professional and personal scope of Physical Education academics with Primary Hyperhidrosis (PH). Methods: A descriptive, exploratory, qualitative and quantitative cross-sectional study was carried out. Twenty-five students from the physical education course
Motriz: rev. educ. fis.. Publicado em: 15/07/2019
-
31. Simulação do Processo de Soldagem Elétrica por Centelhamento de um Aço para Trilhos Ferroviários. Parte 1: Análise de Tensões Residuais Via Elementos Finitos
Resumo Trilhos longos, soldados pelo processo Flash Butt Welding (FBW), são a realidade das ferrovias brasileiras de média e alta carga por eixo. Embora apresentem características desejáveis do ponto de vista do comportamento dinâmico da via, as soldas são regiões de descontinuidade estrutural e mecânica onde se originam tensões residuais, e que est
Soldag. insp.. Publicado em: 27/06/2019
-
32. Numerical Investigation of Tension Reinforcement Lap Length of Eurocode 2 Using a Four-Point Beam Loading System
Abstract This report presents a computational research on Eurocode 2 (EC2) tension lap lengths (lo) design in a normally reinforced concrete beam, using ANSYS Workbench simulation software program by simulating a laboratory 4-point beam loading test system under static loading(discrete model approach). A typical 4-point laboratory setup loading system was mo
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
33. Inelastic second-order analysis of steel columns under minor-axis bending
Abstract The inelastic second-order behavior of steel structural columns under minor-axis bending is presented in this article. To study this behavior, a nonlinear frame element formulation is adopted in which the steel's plasticity process is accompanied at the nodal points of each finite element through the refined plastic-hinge method (RPHM). A tangent mo
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
34. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
35. Bivariate Copula-based Linear Mixed-effects Models: An Application to Longitudinal Child Growth Data
RESUMO Estudos longitudinais com múltiplas variáveis respostas são comuns na área de saúde pública e, consequentemente, métodos estatísticos adequados são requeridos quando há interesse em analisar a evolução temporal de uma ou mais variáveis resposta. Contudo, especificar a função de densidade conjunta de todas as variáveis respostas e a est
TEMA (São Carlos). Publicado em: 30/05/2019
-
36. Monitoring simplification in plankton communities using different ecological approaches
Resumo Objetivo Este estudo pretende responder: (i) as comunidades de fitoplâncton podem ser utilizadas como substitutos de comunidades zooplanctônicas? (ii) podemos utilizar abordagens ecológicas como grupos funcionais (FG) ou classificação morfofuncional (MBFG) como substitutos para espécies de fitoplâncton?; (iii) podemos usar grupos substitutos (
Acta Limnol. Bras.. Publicado em: 30/05/2019