Nondestructive Test
Mostrando 25-36 de 48 artigos, teses e dissertações.
-
25. Utilização de métodos não destrutivos e semi destrutivos na avaliação de pontes de concreto. / Use of non-destructive methods and semi-destructive evaluation of concrete bridges.
As estruturas de concreto, especialmente as pontes de concreto, estão sujeitas a um conjunto de ações que leva ao seu envelhecimento devido aos processos de deterioração, muitas vezes deixando de responder às exigências para as quais foram projetadas. Tal situação, em muitos casos, é agravada pela falta de conhecimento dos processos e mecanismos de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/08/2011
-
26. Investigação da microarquitetura óssea através de microtomografia 3D / Investigation of bone microarchitecture using 3D microtomography
X-Ray Computed Microtomography (uCT) is a nondestructive technique used to study the internal structure of bones with a spatial resolution of the order of microns. In this study, six pairs of bone samples (femur mouse) were studied by uCT. The tests were conducted in the absence or presence of aluminum filters (thickness of 0.25, 0.50 and 0.75 mm), using thr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2011
-
27. Desenvolvimento de método para medida de permeabilidade superficial de revestimentos de argamassa. / Development of method for measuring the surface permeability of coating mortar.
The phenomenon of permeability refers to the ability with which a fluid is transported through a porous medium, driven by pressure gradient between the material and the external environment. Degradation agents are conducted to the interior of mortar and concrete driven through such a phenomenon. Therefore, it is the permeability as a key parameters for durab
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/05/2011
-
28. Development of Non-Destructive Test based on Magnetic Barkhausen noise for characterization of stress and elastic plastic deformation in steels. / Desenvolvimento de Ensaio Não Destrutivo baseado no Ruído Magnético de Barkhausen para caracterização de tensões elásticas e deformações plásticas em aços.
Neste trabalho se estuda a aplicação de um método de Ensaio Não Destrutivo, baseado no Ruído Magnético de Barkhausen (RMB), na medição de falhas superficiais em aços. O RMB é gerado por abruptas mudanças na magnetização de materiais quando submetidos a campos magnéticos variáveis. Essas mudanças são afetadas pela microestrutura e a presença
Publicado em: 2010
-
29. Caracterização da estrutura anatômica do lenho, dos anéis de crescimento e dos canais de resina de árvores de Pinus caribaea var. hondurensis Barr. et Golf. / Characterization of the anatomical structure of the wood, the growth rings and the resin ducts in Pinus caribaea var. hondurensis Barr. et Golf.
The research on resin tapping trees with pine species have shown the effect of factors that affect the production and quality of resin, related with the species, genetic variability, growth rate, age, forest management, etc.. The gum-resin extraction practices, the concentration, frequency of application of chemical stimulants, the time of year that panels a
Publicado em: 2009
-
30. Desenvolvimento de técnicas para avaliação de combustíveis nucleares tipo placa pelo método de ensaio por ultra-som
One of the most important steps in the fabrication processes of plate type nuclear fuels, intended to be used in research reactors or naval propulsion, is the development of nondestructive testing (NDT) methods and techniques for their quality assessment during fabrication and post-irradiation analysis. Those tests can contribute to detect discontinuities su
Publicado em: 2008
-
31. Evaluation of the technological properties of the wood of Eucalyptus urophylla by near infrared spectroscopy. / AVALIAÃÃO DAS PROPRIEDADES DA MADEIRA DE Eucalyptus urophylla POR MEIO DA ESPECTROSCOPIA NO INFRAVERMELHO PRÃXIMO
Forestry companies such as pulp and paper, steel and timber producers, require fast and accurate methods to be applied in a large number of samples for characterization of their raw material. The Near InfraRed Spectroscopy-NIRS is a technique considered fast, non-destructive, applicable in products whose molecules contain mainly CH, OH, NH, HS or C=O bonds.
Publicado em: 2008
-
32. Inspeção de feixes tubulares de trocadores de calor
Decisions making related to the physical conditions of tubular bundles of heat exchangers involves an important subjective aspect due to the intrinsic difficulty of inspection of those components promoted by the complex lay-out of its tubes and consequent lack of visual access. Therefore, it is not unusual to occur failure of those equipments during the camp
Publicado em: 2008
-
33. Structural health monitoring of composite materials subjected to impacts using the electromechanical impedance technique / Monitoramento de integridade estrutural de materiais compostos sujeitos a impactos empregando a técnica da impedância eletromecânica
Nowadays, composite materials have increasingly replaced traditional materials in applications that require improved performance, safety, economy and durability. Nonetheless, such materials exhibit complex damage mechanisms that cannot be easily detected in early stages. Failures can occur during manufacturing, operation or even in the course of maintenance.
Publicado em: 2008
-
34. âDesenvolvimento e ValidaÃÃo de um Modelo MatemÃtico para CÃlculo da Ãrea Superficial de Frangos de Corteâ. / Development and validation of a model to compute the surface area of broiler chickens
SILVA, Eberson. Development and validation of a model to compute the surface area of broiler chickens. 2007. 44 p. Dissertation (Master degree in Agricultural Engineering â Structures and Environment) Federal University of Lavras, Lavras, MG.* The surface area (As) of poultry is an important parameter in heat and mass transfer calculation, being tha
Publicado em: 2007
-
35. Influence of the specimen size on destructive methods of parallel compression grain and on the test non-destructive using ultra sonic waves / Influencia da dimensão do corpo-de-prova no ensaio destrutuvo de compressão paralela as fibras e no ensaio não-destrutivo utilizando ultra-som
é praticamente toda exportada em sua forma in natura sem que a ela seja agregado valor de beneficiamento. Um dos problemas enfrentados pela indústria moveleira é o fato da madeira não ser submetida à classificação, dificultando a elaboração de projetos e a certificação da qualidade do móvel confeccionado a partir deste material. Nesse contexto as
Publicado em: 2006
-
36. Aspects of seeds germination and influence of light on the development, leaf anatomy and chemical composition of essential oil in Ocimum gratissimum L. / Aspectos da germinaÃÃo das sementes e influÃncia da luz no desenvolvimento, anatomia foliar e composiÃÃo quÃmica do Ãleo essencial em Ocimum gratissimum L.
Before the need to deepen the knowledge about medicinal flora, the species Ocimum gratissimum L., an important producer of essential oil much utilized as a phytotherapeutic, was selected. The main objectives in this work were to evaluate physiologic aspects of germination and storage of seeds as well as to investigate growth leaf anatomy and accumulation of
Publicado em: 2006