Non Linear Structural Analysis
Mostrando 1-12 de 68 artigos, teses e dissertações.
-
1. Quality Control for Lignin and Gelatin Microcapsules Loaded with Orange Essential Oil
Sustainable natural product-based microstructured systems and biopolymers are strong candidates for use in crop protection. Lignin and gelatin microcapsules loaded with orange essential oil were developed with spray-drying in order to enhance its potential. We evaluated the microparticle controlled release mechanisms, biological effects, structural and therm
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Behaviour of hollow circular section with multiple perforations under compression, flexure and torsion
Abstract Effect of the presence of perforations on thin structure has been extensively investigated for decades. Various perforation parameters were investigated in past studies. However, study on thin cylinder with multiple perforations has not been carried out. In searching for lighter structural members, the concept of perforated hollow section has been i
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
3. Strut-and-tie models for linear and nonlinear behavior of concrete based on topological evolutionary structure optimization (ESO)
Resumo A busca por sistemas resistentes representativos para estrutura de concreto requer profundo conhecimento sobre seu comportamento mecânico. Os modelos de bielas e tirantes são procedimentos clássicos utilizados no dimensionamento do concreto armado onde existem concentrações de tensão, as chamadas regiões descontínuas da estrutura. No entanto,
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
4. Numerical analysis of cold-formed double angles back-to-back under compression
Abstract Here-in, a numerical analysis based on the Finite Element Method (FEM) is proposed in order to investigate cold-formed steel back-to-back double angle structural behavior under compression. Considering non-linear analysis, an investigation was performed to analyze the influence of some aspects, such as the loading condition (concentric and eccentric
REM, Int. Eng. J.. Publicado em: 2017-12
-
5. Non-Linear Three Dimensional Finite Elements for Composite Concrete Structures
Abstract The current investigation focused on the development of effective and suitable modelling of reinforced concrete component with and without strengthening. The modelling includes physical and constitutive models. New interface elements have been developed, while modified constitutive law have been applied and new computational algorithm is utilised. T
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
6. Thermal Distortion Analysis of Inflatable Antenna Structures Considering Inflation Gas
ABSTRACT This paper addresses the static distortion and stress analysis of inflatable antenna structures subjected to a thermal load, which is a very important type of load experienced by such structures during service in orbit. Non-linear finite element analysis methods for inflatable structures were formulized, and the thermal stress of thin films was cons
J. Aerosp. Technol. Manag.. Publicado em: 2016-12
-
7. Development of Sliding Connections for Structural Analysis by a Total Lagrangian FEM Formulation
Abstract In this study a total lagrangian 2D finite element formulation is used to model plane frames developing large displacements and rotations considering sliding connections. This kind of connections is usually called prismatic and cylindrical joints. In order to be self-containing, the steps of the development of a frame finite element of any approxima
Lat. Am. j. solids struct.. Publicado em: 2016-11
-
8. Numerical Analysis of an Intercity Bus Structure: A Simple Unifilar Model Proposal to Assess Frontal and Semifrontal Crash Scenarios
Abstract To improve the safety of the intercity bus structure against impact scenarios and to reduce the injuries and death in traffic accidents it is crucial in a country with continental dimensions like Brazil, where the road transport matrix is fundamental in the traffic of people and goods. In this context in the present article, a numerical model of an
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
9. Structural analyses of reinforced tubular T-joints
Abstract The use of rolled hollow sections has been substantially boosted mainly due to the advantages associated with structural behavior and aesthetics, leading to an intense use in Europe, Southeast Asia, North America, Australia, and now, in Brazil due to the wider supply of these profiles. Therefore, it is important to investigate the structural behavio
Rem: Rev. Esc. Minas. Publicado em: 2016-03
-
10. Shear Strengthening of RC Deep Beams with Sprayed Fiber-reinforced Polymer Composites (SFRP): Part 2 Finite Element Analysis
AbstractThis paper presents the finite element analysis conducted on SFRP strengthened reinforced concrete (RC) deep beams. The analysis variables included SFRP material (glass and carbon), SFRP thickness (3 mm and 5 mm), SFRP configuration and strength of concrete. The externally applied SFRP technique is significantly effective to enhance the ultimate load
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
11. In silico Antibacterial Activity Modeling Based on the TOMOCOMD-CARDD Approach
In the recent times, the race to cope with the increasing multidrug resistance of pathogenic bacteria has lost much of its momentum and health professionals are grasping for solutions to deal with the unprecedented resistance levels. As a result, there is an urgent need for a concerted effort towards the development of new antimicrobial drugs to stay ahead i
J. Braz. Chem. Soc.. Publicado em: 2015-06
-
12. A New Jacobi-based Iterative Method for the Classical Analysis of Structures
Abstract Traditionally, classical methods of structural analysis such as slope-deflection and moment distribution methods (Cross method) are used for primary analysis of structures and also controlling the results of computer programs. The main objective of this paper is to introduce a new method for classical computing and extending it to a matrix formulati
Lat. Am. j. solids struct.. Publicado em: 2015