Non Destructive Testing
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Estimação da profundidade de fissuras em concreto através da velocidade de ondas ultrassônicas
RESUMO As fissuras são as manifestações patológicas mais recorrentes no concreto, devido as diferentes formas de exposição que o material está sujeito. Neste cenário, é importante que as edificações passem por inspeções através de diferentes métodos, dentre os quais os ensaios não destrutivos (END) aparecem como ferramenta alternativa. Dentre
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Tempo de Voo da Onda Difratada (ToFD) Auxilia na Garantia da Qualidade da Produção de Peças e Estruturas Mecânicas
Resumo A Técnica Tempo de Voo da Onda Difratada (ToFD) é uma técnica de ensaio não destrutivo por ultrassom utilizada para a detecção de falhas e descontinuidades em diferentes componentes, garantindo a qualidade, confiabilidade e segurança. É amplamente utilizada na indústria, principalmente na avaliação de peças e estruturas mecânicas. É lar
Soldag. insp.. Publicado em: 14/11/2019
-
3. Evaluation of reinforced concrete structural durability in the post-occupation phase - A case study in Novo Hamburgo/RS
Abstract Researches on building performance have been developed over time. The Brazilian Performance Standard - NBR 15575 - deals with the issues of durability applied to residential buildings, establishing criteria and parameters to classify the systems into minimum, intermediate and higher performance levels. In relation to the service life, studies are al
REM, Int. Eng. J.. Publicado em: 2019-03
-
4. Monitoring Heat Treatments in Steels by a Non Destructive Ultrasonic Method
In order to determine if heat treatments can be discerned by nondestructive ultrasonic testing, samples of SAE 1045 and SAE 4140 steels were subjected to the classical heat treatments of annealing, normalizing, quenching, and quenching and tempering, and their elastics constants, Young's, shear and Poisson's moduli, were monitored by ultrasound. Results show
Mat. Res.. Publicado em: 24/08/2017
-
5. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
6. Aplicação de métodos não destrutivos para qualificação de combustíveis tipo dispersão de U308-Al e U3Si2-Al no reator IEA-R1 / Application of non-destructive methods for qualification of the U3O8-Al and U3Si2-Al dispersion fuels in the IEA-R1 Reactor
IPEN/CNEN-SP manufactures fuels to be used in its nuclear research reactor the IEA-R1. To qualify those fuels, it is necessary to check if they have a good performance under irradiation. As Brazil doesnt have nuclear research reactors with high neutron fluxes, or suitable hot cells for carrying out post-irradiation examination of nuclear fuels, IPEN/CNEN-SP
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/11/2011
-
7. PROPRIEDADES FÍSICO-MECÂNICAS DE CHAPAS AGLOMERADAS PRODUZIDAS COM BAMBU, PINUS E EUCALIPTO. / PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD PRODUCED WITH BAMBOO, PINE AND EUCALYPT.
This study investigated the physical and mechanical properties of particleboards formed of bamboo (Bambusa tuldoides), pine (Pinus taeda) and eucalyptus (Eucalyptus grandis) and their combinations. To this end, panels were made, defined by the use of each type of particle pure or mixed by two or three being set 0, 25, 50, 75 and 100% of dry weight proportion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/07/2011
-
8. Avaliação da eficiência do ácido pirolenhoso no tratamento preservativo de taliscas de bambu gigante contra a deterioração por fungos / Evaluation of pyroligneous acid efficiency on preservative treatment of giant bamboo strips against fungi
O bambu apresenta inúmeras características que o qualificam como um material versátil e que há milhares de anos vem servindo como matéria-prima para diversos fins, fazendo parte da história e da cultura de muitos povos. Muitas pesquisas vêm sendo realizadas acerca da utilização do bambu em setores diversos como da construção civil, movelaria e pro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/05/2011
-
9. Análise de blocos estruturais de concreto utilizando a técnica da ultrassonografia
The use of non-destructive testing (NDT) inspection and ultrasound evaluation of physical and mechanical properties of concrete has been in recent years, the subject of advanced studies both in academia and in science. This technique, known more and more, gaining new fans and greater reliability along the production chain of Construction, focused only on ins
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/02/2011
-
10. Análise estatística multivariada para reconhecimento de padrões em ensaios não destrutivos magnéticos. / Multivariate statistical analysis for pattern recognition applied to a non destructive magnetics testing.
Neste trabalho se estuda a aplicação de técnicas de estatística multivariada para reconhecimento de padrões em sinais de ensaios não destrutivos (END) magnéticos, baseados no Ruído Magnético de Barkhausen (RMB). O reconhecimento de padrões pode ser feito de forma não supervisionada com a técnica multivariada de Análise de Agrupamentos, conglomer
Publicado em: 2011
-
11. A simple and reliable method for the screening of transgenic tobacco plants.
Even though much improvement has been made in plant transformation methods, the screening of transgenic plants is often a laborious work. Most approaches for detecting the transgene in transformed plants are still time-consuming, and can be quite expensive. The objective of this study was to search for a simpler method to screen for transgenic plants. The in
Pesquisa Agropecuária Brasileira. Publicado em: 2011
-
12. Generation mean analysis of root growth under aluminium-stress hydroponics in the soybeans (Glycine max (L.) Merrill).
There are vast areas in the tropics which are limited in their use by mineral stresses such as aluminium and low available nutrients. The grain crops shall be further adapted if breeding programmes include identification and use of the genetic factors to these hindrances. Three soybean families originated from crosses, selfing and backcrosses among the varie
Pesquisa Agropecuaria Brasileira. Publicado em: 2011