Ni Cr Mo Alloys
Mostrando 13-19 de 19 artigos, teses e dissertações.
-
13. Magnetic properties of Pr-Fe-Co-B bonded HDDR magnets with alloying additions
Microstructures and magnetic properties of Pr-Fe-Co-B bonded magnets were investigated. The magnets can be represented by the formulae, Pr14Fe63.9Co16B6M 0.1 (M = Ti, V, Cr, Ni, Zr, Nb or Mo), Pr14Fe63.8Co16B6Nb 0.1T0.1 (T/= Al, Si, P, Cu or Ga) and Pr14Fe63.6Co16B6Nb 0.1R0.3 (R = Gd, Tb or Dy). The effects of additions on the magnetic properties of PrFeCoB-
Materials Research. Publicado em: 2007-09
-
14. Obtenção de ligas amorfas em volume : aplicações a ligas metalicas e a compostos intermetalicos magnetocaloricos / Production of bulk amorphous alloys : application an metallic alloys an magnetocaloric intermetallic compounds
O objetivo deste trabalho foi obter ligas amorfas em volume metálicas e magnetocalóricas através dos processos de centrifugação e injeção. Para isto foi necessária a construção de uma injetora em vácuo de ligas metálicas. Testes para confirmar a possibilidade de obtenção de novas ligas amorfas em volume através destes processos foram feitos co
Publicado em: 2006
-
15. CaracterizaÃÃo das Fases Presentes em DepÃsito de NÃquel ER-NiCrMo-3 em Tubos de AÃo de 9Cr 1Mo Usados em Fornos de Refinaria de PetrÃleo / Characterization of Phases Present in ER-Nickel Deposit NiCrMo-3 in the 9Cr Steel Tube 1mo Used in Oil Refinery Furnaces
Este trabalho estuda as fases presentes na solda de Inconel 625 utilizadas para unir tubos de uma serpentina de forno de uma refinaria de petrÃleo, fabricada com material de aÃo liga tipo 9Cr-1Mo e revestida internamente com alumÃnio. Para a realizaÃÃo do estudo, foi fabricado um corpo dee prova em conformidade com os procedimentos de fabricaÃÃo da se
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/09/2005
-
16. In vitro and in vivo electrochemical studies of nickel-chromium-molybdenum-titanium alloy applied to oral implant suprastructures / Estudos eletroquímicos in vitro e in vivo da liga níquelcromomolibdênio titânio aplicada em supraestruturas de implantes orais
The electrochemical behavior of the nickel-chromium-molybdenum-titanium (Ni-Cr-Mo-Ti) alloy was studied and compared to a gold-platinum-palladium (Au-Pt-Pd) alloy in 0.15 mol.L -1 NaCl medium at 36.5ºC. In vitro studies also involved the electrochemical titanium characterization since these alloys are employed in osseointegrated implant suprastructures. In
Publicado em: 2005
-
17. "Estudo da biocompatibilidade de ligas metálicas odontológicas e do Ti cp obtidos por fundição" / Study of biocompatibility of dental alloys and Ti cp obtained by casting
Há uma grande quantidade de ligas odontológicas no mercado e é difícil para os dentistas escolher qual utilizar. Além disso, não há pesquisas que tenham investigado a influência dos métodos de fundição e da variação de temperatura na biocompatibilidade destes materiais. Então, o objetivo deste estudo foi comparar a biocompatibilidade das ligas
Publicado em: 2005
-
18. Desajuste Marginal de Infra-estruturas metálicas de próteses fixas sobre implantes considerando tipos de pilares, materiais e solda a laser / Marginal misfit of metallic structures of total fixed implant supported prosthesis considering abutments, material and laser welding
The adaptation precision of metallic structures to implant abutments is a very questionable subject and the scientific literature lacks about the alloy that shows an adaptation closer to the ideal. This study had the proposal of: evaluating the vertical marginal misfit levels (in μm) using a digital microscope of one-piece and after laser welding metall
Publicado em: 2005
-
19. Role of alloying elements and carbides in the chlorine-induced corrosion of steels and alloys
The high temperature corrosion of steels and Ni-base alloys in oxidizing and chloridizing environments is of practical interest in relation to problems in waste incineration plants and power plants using Cl containing fuels. The behaviour of the most important alloying elements Fe, Cr, Ni, Mo, Mn, Si, Al upon corrosion in an oxidizing and chloridizing atmosp
Materials Research. Publicado em: 2004-03