Navier
Mostrando 13-24 de 294 artigos, teses e dissertações.
-
13. Simulação Numérica da Dinâmica de Coliformes Fecais no Lago Luruaco, Colômbia
RESUMO O lago Luruaco localizado no Departamento de Atlántico, Colômbia, sofre com o despejo de esgoto sem tratamento, trazendo riscos à saúde de todos que utilizam suas águas. O presente estudo tem como objetivo realizar a simulação numérica da dinâmica da concentração de coliformes fecais no lago. A simulação do fluxo hidrodinâmico do lago é
TEMA (São Carlos). Publicado em: 2017-12
-
14. On the development of the Navier-Stokes equation by Navier
After the work of Navier, the Navier-Stokes equation was re-obtained by different arguments by numerous investigators. We have chosen to revisit the approaches of Navier not only because they were pioneering, but also because, unexpectedly, by undergirding his theory on Laplace's new concept of molecular forces - thought to be capable of capturing the effect
Rev. Bras. Ensino Fís.. Publicado em: 30/11/2017
-
15. Performance and Wake Analysis of Rotors in Axial Flight Using Computational Fluid Dynamics
ABSTRACT: Flow field around rotors in axial flight is known to be complex especially in steep descent where the rotor is operating inside its own wake. It is often reported that, in this flight condition, the rotor is susceptible to severe wake interactions causing unsteady blade load, severe vibration, loss of performance, as well as poor control and handli
J. Aerosp. Technol. Manag.. Publicado em: 2017-06
-
16. Aerodynamics of Harmonically Oscillating Aerofoil at Low Reynolds Number
ABSTRACT: Two-dimensional flows over harmonically oscillating symmetrical aerofoil at reduced frequency of 0.1 were investigated for a Reynolds number of 135,000, with focus on the unsteady aerodynamic forces, pressure and vortex dynamics at post-stall angles of attack. Numerical simulations using ANSYS® FLUENT CFD solver, validated by wind tunnel experimen
J. Aerosp. Technol. Manag.. Publicado em: 2017-03
-
17. A New Fifth-Order Shear and Normal Deformation Theory for Static Bending and Elastic Buckling of P-FGM Beams
Abstract A new fifth-order shear and normal deformation theory (FOSNDT) is developed for the static bending and elastic buckling analysis of functionally graded beams. The properties of functionally graded material are assumed to vary through the thickness direction according to power-law distribution (P-FGM). The most important feature of the present theory
Lat. Am. j. solids struct.. Publicado em: 2017
-
18. Numerical Study of Wake Characteristics in a Horizontal-Axis Hydrokinetic Turbine
ABSTRACT Over the years most studies on wake characteristics have been devoted to wind turbines, while few works are related to hydrokinetic turbines. Among studies applied to rivers, depth and width are important parameters for a suitable design. In this work, a numerical study of the wake in a horizontal-axis hydrokinetic turbine is performed, where the ma
An. Acad. Bras. Ciênc.. Publicado em: 01/12/2016
-
19. Navier Solution for Buckling Analysis of Size-Dependent Functionally Graded Micro-Plates
Abstract In the present paper, buckling analysis of functionally graded rectangular micro-plates, on the basis of strain gradient theory with one length scale parameter is studied. Considering the Kirchhoff plate theory and the principle of minimum total potential energy, governing equations of micro-plate subjected to in-plane loads are extracted. In accord
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
20. Computational Fluid Dynamics (CFD) simulating heated air from wood burning inside a poultries barn
ABSTRACT Animal welfare is essential for livestock yield gains, which has been ethically justifiable and socially acceptable. Thus, our research aimed to test computational fluid dynamics model (CFD) to simulate heated air within a poultry barn. Data were simulated in CFD software based on Navier-Stokes equations (geometry of 3 m x 6 m, considering a symmetr
Eng. Agríc.. Publicado em: 2016-10
-
21. Simulation of Stress Concentration Problems in Laminated Plates by Quasi-Trefftz Finite Element Models
Abstract Hybrid quasi-Trefftz finite elements have been applied with success to the analysis of laminated plates. Two independent fields are approximated by linearly independent, hierarchical polynomials: the stress basis in the domain, adapted from Papkovitch-Neuber solution of Navier equations, and the displacement basis, defined on element surface. The st
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
22. NUMERICAL SIMULATION OF THE INCOMPRESSIBLE TURBULENT FLOW OF A BINARY MIXTURE OF AIR-WATER VAPOR: APPLICATIONS IN DRYING PROCESS
Abstract The present work deals with numerical simulation of the incompressible turbulent flow of a binary mixture air-water vapor inside channels. Calculations are performed using the RANS (Reynolds Average Navier-Stokes Equations) formulation in addition to the standart k-ε turbulence model. The mathematical model is discretized by a finite difference sch
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
23. Túneis de vento numéricos
Escoamentos viscosos não são, em geral, discutidos de maneira detalhada em cursos de física geral e básica. Isso se deve, em parte, ao fato da equação de Navier-Stokes admitir solução analítica apenas para alguns poucos casos restritos, enquanto problemas mais sofisticados só podem ser resolvidos por meio de métodos numéricos. Neste trabalho, apr
Rev. Bras. Ensino Fís.. Publicado em: 19/04/2016
-
24. CFD 2D Description of Local Flow of Polymer Workpiece through a modified U-Shaped Die During Equal Channel Multiple Angular Extrusion
The present article is focused on a 2D computational fluid mechanics study of local viscous flow dynamics and the formation character of rotary modes of deformation during Equal Channel Multiple Angular Extrusion (ECMAE) of a polymer workpiece fluid model through a U-shaped die with parallel slants in channel intersection zones. The present local flow proble
Mat. Res.. Publicado em: 08/04/2016