Nanowires
Mostrando 1-12 de 75 artigos, teses e dissertações.
-
1. Reusable Heterogeneous SnO2/ZnO Catalyst for Biodiesel Production from Acidified/Acid Oils
A catalyst comprised of SnO2 impregnated on ZnO nanowires, which presented remarkable ability to catalyze fatty acid esterification/transesterification reactions, is reported. For optimization of reaction conditions, artificially acidified soybean oil with 10 wt.% oleic acid was used as a model feed. The optimized conditions were: 150 °C, 6 h, 5 g of oil, c
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
2. INFLUÊNCIA DA COMPOSIÇÃO DOS NANOFIOS PT-IR/C NA ATIVIDADE CATALÍTICA FRENTE A OXIDAÇÃO ELETROQUÍMICA DE ETANOL EM MEIO ÁCIDO
Carbon-supported platinum-iridium nanowire-shape electrocatalysts containing 20% of metallic loading were synthesized by chemical reduction method using formic acid as a reducing agent and tested towards the oxidation of ethanol in acidic medium. The developed electrocatalysts were synthesized with the following compositions: Pt0.9Ir0.1/C, Pt0.8Ir0.2/C, Pt0.
Quím. Nova. Publicado em: 2020-02
-
3. Doped Silicon Nanowires for Lithium Ion Battery Anodes
Nanostructured silicon (Si) has showed outstanding results as Li-ion battery anode material. Fabrication of nanostructured silicon anode materials is usually very complex, time consuming and expensive. In this work, silicon nanowires (SiNW`s) were produced by using rapid and uncostly metal catalyzed electroless etching (MCEE) method from various silicon wafe
Mat. Res.. Publicado em: 17/01/2019
-
4. Estudio Ab-initio de propiedades estructurales, elásticas y electrónicas de nanohilos core/shell
ABSTRACT This Zinc oxide (ZnO) is widely used in different electronic devices due to its thermal, electronic, and piro-piezoelectric properties. Some of these properties are noticeable improvement at the nanoscale, specially when ZnO together with other material create heterostructures. Recently, core/shell nanowires have been synthesized in order to raise t
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Analysis of Styrene Polymerization Without Surfactant and N2 Gas in Cylindrical Flask.
The conditions of chemical synthesis can be crucial for polymerization of styrene in such a way that it can be produced latex beads at nanometric range (ϕ < 400nm). In this work, it will be analyzed how the absence of N2 and surfactant will result in colloidal particles with high affinity to agglomerate forming two kinds of nanostructured assemblies: colloi
Mat. Res.. Publicado em: 22/01/2018
-
6. AgAu Nanotubes: Investigating the Effect of Surface Morphologies and Optical Properties over Applications in Catalysis and Photocatalysis
We herein report the preparation of AgAu nanotubes displaying controlled surface morphologies and optical properties by varying the reaction temperature during the galvanic reaction between Ag nanowires and AuCl4-(aq). As the AgAu nanotubes presented similar sizes and compositions, they enabled us to isolate the influence of surface morphology and optical pr
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
7. Effect of the modification by titanium dioxide nanotubes with different structures on the fatigue response of Ti grade 2
Nanotechnology is seeing as having potential to raise benefits to several research and application areas. Recently materials with nanostructured surfaces of nanopores, nanotubes and nanowires have become an important investigation field, since their chemical and physical properties may be substantially different from those of the corresponding substrate. In
Mat. Res.. Publicado em: 18/05/2017
-
8. Facile Synthesis of Tellurium Nanowires and Study of Their Third-Order Nonlinear Optical Properties
We report on the synthesis of single-crystalline tellurium nanowires with different aspect-ratios prepared via facile surfactant-assisted synthesis under mild conditions. Short and long Te nanowires were synthesized by the reduction of tellurium dioxide by hypophosphorous acid with the assistance of polyoxyethylene (23) laurylether and cetyltrimethylammonium
J. Braz. Chem. Soc.. Publicado em: 2017-01
-
9. MATHEMATICAL MODELING OF THE ELECTRIC CURRENT GENERATION IN A MICROBIAL FUEL CELL INOCULATED WITH MARINE SEDIMENT
Abstract Microbial fuel cells (MFC) are electrochemical devices that utilize the ability of some microorganisms to oxidize organic matter and transfer electrons resulting from their metabolism to an insoluble acceptor. The goal of the present study was to model the kinetics of electrical current generation from an MFC inoculated with marine sediment. For thi
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
10. Fabricación de alúmina anódica porosa de bajo costo: Un estudio comparativo de la morfología producida por uno y dos pasos de anodizado
ABSTRACT A simple and low cost method for the fabrication of Nanoporous alumina templates with potential applications for nanowires fabrication is described. As raw material, commercial aluminum has been used. The nanoporous templates obtained have a mean pore diameter of (20 ± 4) nm. The fabrication process consists mainly of two-step anodization. Both ste
Matéria (Rio J.). Publicado em: 2016-09
-
11. Nano and Micro Ceramic Membranes from Degradable Templates
Abstract The nano/microstructures with highly porous surface area have attracted tremendous attention, particularly the synthesis and tailoring of porous and hollow materials of high performance. In this paper, an easy method of cost-effective synthesis of hollow ceramic fiber membranes based on Hydroxyapatite, TiO2 and ZrO2 stabilized with Yttrium, is propo
Mat. Res.. Publicado em: 28/07/2016
-
12. Electrosynthesis and Characterisation of Polymer Nanowires from Thiophene and its Oligomers
Validating methodology formerly reported, polythiophene electrosynthesised as nanowires from the monomer and some of its oligomers is now described. The work is conducted on a platinum electrode previously modified with a template that tunes the polymer growth inside the confined space of the pores. In addition, it was confirmed that the use of larger chain-
J. Braz. Chem. Soc.. Publicado em: 2015-11