Nanostructured
Mostrando 37-48 de 284 artigos, teses e dissertações.
-
37. Synthesis and Characterization of Niobium Carbide with Copper Addition Obtained Via Gas Solid Reaction
The use of niobium containing materials' has gained much attention of the scientific community in the late years due its various applications in diverse fields. NbC is a highly versatile material. Copper addition may alter several of its properties, such as morphology, crystal structure etc. as well as enhance its catalytic behavior. Nanostructured NbC with
Mat. Res.. Publicado em: 26/02/2018
-
38. Nanoporous Gold Surface: An Efficient Platform for Hydrogen Evolution Reaction at Very Low Overpotential
A nanostructured porous gold film (NPGF) was fabricated onto a gold electrode surface by an electrochemical approach involving anodization followed by electrochemical reduction in absence of binary alloys, templates and chemical reducing agents. The electrocatalytic activity of the as-fabricated electrocatalyst was examined towards hydrogen evolution reactio
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
39. Influence of pH in Obtaining Indium Tin Oxide Nanoparticles by Microwave Assisted Solvothermal Method
A systematic study about synthesis of In1-xSnxO2 (ITO) nanostructured crystals by microwave-assisted solvothermal method is reported. Different solutions using InCl3.4H2O and SnCl4.5H2O precursors in ethylene glycol solvent were prepared in distinct pHs (acid and basic ones). The syntheses were performed at 200 ºC using a heating rate of 50 ºC min-1 and so
Mat. Res.. Publicado em: 22/01/2018
-
40. Analysis of Styrene Polymerization Without Surfactant and N2 Gas in Cylindrical Flask.
The conditions of chemical synthesis can be crucial for polymerization of styrene in such a way that it can be produced latex beads at nanometric range (ϕ < 400nm). In this work, it will be analyzed how the absence of N2 and surfactant will result in colloidal particles with high affinity to agglomerate forming two kinds of nanostructured assemblies: colloi
Mat. Res.. Publicado em: 22/01/2018
-
41. Alveolar bone repair with strontium- containing nanostructured carbonated hydroxyapatite
ABSTRACT Objective: This study aimed to evaluate bone repair in rat dental sockets after implanting nanostructured carbonated hydroxyapatite/sodium alginate (CHA) and nanostructured carbonated hydroxyapatite/sodium alginate containing 5% strontium microspheres (SrCHA) as bone substitute materials. Methods: Twenty male Wistar rats were randomly divided into
J. Appl. Oral Sci.. Publicado em: 18/01/2018
-
42. Spray Deposited Nanostructured CuO Thin Films: Influence of Substrate Temperature and Annealing Process
In this study, CuO thin films were deposited on glass substrates at a wide range of temperatures from 450ºC to 550ºC with steps of 25ºC by chemical spray pyrolysis technique. Aiming to investigate the effect of annealing process, one of the resulting films was annealed at 450ºC for 3 hours under ambient air. Based on X-ray diffraction, all the resulting
Mat. Res.. Publicado em: 11/01/2018
-
43. ZnO nanoparticle fabrication starting from ultra-high (1:2) PVOH/ZnAc proportion electrospun nanowire mats
Abstract: The high versatility of nanostructured ZnO has drawn considerable attention from the scientific community since the second half of the two thousand decade. Within this timeframe, electrospinning became one of the simplest ways to produce nanostructured ZnO. In this work, we present the production and characterization of ZnO nanoparticles obtained f
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
44. Nanostructured magnetic alginate composites for biomedical applications
Abstract This is a study of the preparation and characterization of polymeric-magnetic nanoparticles. The nanoparticles used were magnetite (Fe3O4) and the chosen polymers were alginate and chitosan. Two types of samples were prepared: uncoated magnetic nanoparticles and magnetic nanoparticles encapsulated in polymeric matrix. The samples were analyzed by XR
Polímeros. Publicado em: 2017-12
-
45. Development and Validation of a Stability-Indicating Method for Perillyl Alcohol Incorporated in Poly(lactide-co-glycolide) Nanoparticles and Stress Degradation Studies
Perillyl alcohol has been studied in the treatment of cancer disease. However, its high toxicity is a drawback, which can be overcome by its incorporation in nanostructured systems. The aim of this work was to develop and validate a chromatographic method for determination of perillyl alcohol encapsulation efficiency in a polymeric nanoparticles formulation
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
46. Titanate Nanotubes as New Nanostrutured Catalyst for Depolymerization of PET by Glycolysis Reaction
The final destination of PET packaging is creating economic and environmental concerns. One of the alternatives to minimize this problem would be making use of chemical recycling of this material through glycolysis with the aim to produce bis(hydroxiethyl) terephthalate, BHET monomer. This reaction is well known, but it still presents problems as BHET purity
Mat. Res.. Publicado em: 06/11/2017
-
47. Influencia del Aporte Térmico Sobre la Microestructura en Recargues Duros Multicomponentes (Cr, Mo, W, Nb, C, B) Nanoestructurados Base Hierro
Abstract: Surfacing welding is an issue that was increasing in relevance in last years, related with a raising number of applications in several industries. Hardfacings of nanostructured multicomponent steel of recent creation, have a set of outstanding properties. Nevertheless, the information available related with its processing is still scarce. The aim o
Soldag. insp.. Publicado em: 09/10/2017
-
48. Nanostructured Antigen-Responsive Hydrogels Based on Peptides for Leishmaniasis Detection
Hydrogels based on peptide nanostructures are biological entities that can be applied in a wide range of applications, such as scaffolds for tissue engineering, drug delivery, and biosensors. The aim of this research was to study peptide hydrogels based on N-(9-fluorenylmethoxycarbonyl)-L, L-diphenylalanine (Fmoc-FF) in two different media: water and phospha
J. Braz. Chem. Soc.. Publicado em: 2017-09