Nanostructured
Mostrando 1-12 de 284 artigos, teses e dissertações.
-
1. Impact of fuel quantity on luminescence properties of Sr3Al2O6:Eu by combustion synthesis
Abstract The photoluminescent behavior of Eu-doped Sr3Al2O6 obtained by highly efficient solution combustion synthesis is reported. In order to understand the influence of the fuel on the synthesis, the stoichiometric quantity and an excess of fuel were evaluated. By adjusting the amount of fuel, different luminescence responses were obtained, allowing europ
Cerâmica. Publicado em: 2023
-
2. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
3. Antimicrobial High-Density Polyethylene (HDPE)/ZnO Nanocomposites Obtained by in situ Polymerization
Nanostructured zinc oxide (ZnO) prepared by combustion in solution was used to obtain nanocomposites. The ZnO particles were characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), and scanning electron microscopy (SEM), showing crystallite size of 32 nm and a superficial area of 32.6 m2 g-1. Nanocomposites with 1, 3, and 5 wt.% of ZnO in the
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
4. Nanostructured Lipid Carriers Loaded with 17-α-Estradiol Accumulate into Hair Follicles
To improve 17-α-estradiol targeting in alopecia treatment, a formulation of nanostructured lipid carrier (NLC) prepared by the sonication method was developed. The physicochemical characterization showed an average diameter of 96 ± 15 nm and the average zeta potential of -17 ± 6 mV. In addition, the encapsulation efficiency (EE) of 17-α-estradiol, assess
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
5. Effect of Welding Parameters on Nanostructured Fe-(C, B)-(Cr, Nb) Alloys
New nanostructured Fe-(Nb,Cr)-(C,B) multicomponent alloys have been developed for hardfacing application. They have better wear resistance than traditional Fe-Cr-C alloys. The nano-alpha-Fe, eutectic and hard carboborides phases of the weld metal usually show variations with the welding procedure. 6 test samples with different heat input were welded. It was
Mat. Res.. Publicado em: 20/01/2020
-
6. Solvothermal Synthesis of Cerium-Doped Titania Nanostructured Materials Modified with Acetylacetone for Solar-Driven Photocatalysis
This study reports the preparation of nanostructured cerium-doped titanium dioxide photocatalysts containing different cerium concentrations by a modified sol-gel route involving the use of acetylacetone. The nanocrystalline powders had their structural, morphological, and optical properties characterized by X-ray diffraction, vibrational and Raman spectrosc
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
7. ToF-SIMS Characterization of Nanostructured ZrO2 Coatings Applied to Near Equiatomic Ni-Ti Alloy
The ToF-SIMS technique was applied to analyze thin ZrO2 coatings deposited on the surface of a Ni-Ti alloy. Due to its nanostructured nature, these films are difficult to characterize by conventional techniques. ZrO2 coatings were deposited on near equiatomic Ni-Ti wires by pulse electrodeposition. Part of the samples was electrolytically polished before the
Mat. Res.. Publicado em: 20/12/2019
-
8. SYNTHESIS, CHARACTERIZATION, ADSORPTION AND THERMODYNAMIC STUDIES OF PURE AND BINARY CO2-N2 MIXTURES ON OXYGEN ENRICHED NANOSTRUCTURED CARBON ADSORBENTS
Abstract Oxygen enriched porous carbons have been synthesized by a nanocasting technique using mesoporous zeolite as template and epoxy resin as precursor. Characterization results show the effect of the nanocasting technique on the development of heterogeneous surface, high basicity, and high surface area of 686.37 m2g-1, beneficial for CO2 adsorption. Pure
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
9. Size and shape-controlled nanomaterials based on modified polyol and thermal decomposition approaches. A brief review.
Abstract: Since its inception in 2007, the Colloidal Materials Group, one of the research groups in nanotechnology of the Institute of Chemistry of São Carlos (IQSC) at University of São Paulo (USP) carries out studies related to the development of syntheses methods of nanoparticles and multifunctional nanostructured systems. Our works search new synthesis
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
10. Proteins and Peptides at the Interfaces of Nanostructures
Abstract: The present review focuses on the proteins and peptides at the interfaces of nanostructured metals and semiconductors as a result of their use in synthesis in-situ and functionalization of nanostructures. We start the review with an introduction about the peculiar properties of nanostructured materials and their applications. In the following, the
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
11. Performance eletrocatalítica frente a nitrito de um filme híbrido de fosfomolibdato e sílica organomodificada
RESUMO Materiais híbridos orgânico-inorgânicos nanoestruturados são produzidos com a finalidade de desenvolver e/ou aprimorar uma propriedade de interesse. Uma forma de obtenção de materiais híbridos é através da imobilização de um componente inorgânico em uma rede de sílica organicamente modificada (ormosil). Neste trabalho, um polioxometalato
Matéria (Rio J.). Publicado em: 25/11/2019
-
12. Fish Bone as a Source of Raw Material for Synthesis of Calcium Phosphate
Fish bone is rich in calcium carbonate, which makes it an alternative source of low cost calcium carbonate for the synthesis of calcium phosphate bioceramic for use in bone regeneration. The calcium phosphate bioceramic was prepared by a wet precipitation method with acid and base reactions. The synthesized bioceramic was characterized in terms of X-ray diff
Mat. Res.. Publicado em: 28/10/2019