Nanostructured Materials
Mostrando 13-24 de 107 artigos, teses e dissertações.
-
13. Effect of the modification by titanium dioxide nanotubes with different structures on the fatigue response of Ti grade 2
Nanotechnology is seeing as having potential to raise benefits to several research and application areas. Recently materials with nanostructured surfaces of nanopores, nanotubes and nanowires have become an important investigation field, since their chemical and physical properties may be substantially different from those of the corresponding substrate. In
Mat. Res.. Publicado em: 18/05/2017
-
14. Study of the Nanostructure Effect on Polyalkylthiophene Derivatives Films Using Impedance Spectroscopy
In this paper, devices fabricated with a diode-like structure (electrode/polymer/electrode) from spin-coated and nanostructured (Langmuir-Schaefer) films of polythiophene derivatives were characterized by impedance spectroscopy and studied by theoretical fitting to reach a better understanding of the physical processes in the devices. The materials used for
Mat. Res.. Publicado em: 20/03/2017
-
15. OTIMIZAÇÃO DA SÍNTESE DE HIDROGÉIS NANOCOMPÓSITOS INTERCALADOS PARA POSSÍVEL APLICAÇÃO NA ÁREA MÉDICA
In this study, the hydrogel formulations based on polysaccharide sodium alginate were investigated for further development of intercalated nanocomposite hydrogels, for purposes of future applications in the areas of health as a carrier in drug delivery systems. Thus, the objective of the work dealt with in the optimization of hydrogels synthesis and obtainin
Quím. Nova. Publicado em: 2017-01
-
16. Estudio de la estructura y las propiedades mecánicas en un recubrimiento de circona estabilizada con 8% en mol de itria elaborado por proyección térmica por plasma a partir de suspensiones
The study of nanostructured coatings manufactured by thermal spraying has generated a great interest in the last two decades due to their considerable improved properties especially in the physical and mechanical properties. This improvement is to reduce grain sizes of their raw materials at scales of 100-1000 times lower compared to conventional coatings (m
Matéria (Rio J.). Publicado em: 2016-03
-
17. Self-Assembled Networks and Molecular Gels Derived from Long-Chain, Naturally-Occurring Fatty Acids
Self-assembly of molecular gelators in a variety of liquids provides an attractive route for the construction of nanostructured materials with desired functionalities. This review focuses on correlations between structural features of gelators, specifically derivatives of long-chain, naturally-occurring fatty acids in which functional groups have been modifi
J. Braz. Chem. Soc.. Publicado em: 2016-02
-
18. NIR Luminescence from Sol-Gel Er3+ Doped SiO2:GeO2 Transparent Gels, Nanostructured Powders and Thin Films for Photonic Applications
Samples of (1 – x)SiO2:xGeO2 compositions, containing x = 10 and 20, and doped with Er3+, were prepared by a simple sol-gel route. Homogeneous and transparent gels were synthesized and xerogels were obtained by gel annealing from 700 ºC to 1100 ºC. Films exhibiting high transmittance in the visible and near infrared were deposited by spin-coating techniq
J. Braz. Chem. Soc.. Publicado em: 2015-12
-
19. UTILIZAÇÃO DO COMPÓSITO NANOESTRUTURADO SIO2/TIO2NA FOTODEGRADAÇÃO DE CORANTES TÊXTEIS COM LUZ SOLAR NATURAL
SiO2/TiO2 nanostructured composites with three different ratios of Si:Ti were prepared using the sol-gel method. These materials were characterized using energy dispersive X-ray fluorescence, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, photoluminescence, Raman wit
Quím. Nova. Publicado em: 2015-09
-
20. Solvent Effect on the Morphology of Lamellar Nanocomposites Based on HIPS
In this study, hybrid nanocomposites based on HIPS, high-impact polystyrene, were prepared in chloroform and in a 1:1 mixture of toluene and chloroform varying the quantity of organophilic montmorillonite. The morphology of the hybrid materials was investigated by X-ray diffraction (XRD) and proton relaxometry, determined in a low-field 1H nuclear magnetic r
Mat. Res.. Publicado em: 2015-02
-
21. Supramolecular arrangements of an organometallic forming nanostructured films
Organometallic materials have become subject of intensive research on distinct technological applications. The Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques have proven to be suitable to address challenges inherent to organic devices, in which the film properties can be tuned at molecular level. Here, we report on the supramolecular arrangemen
Mat. Res.. Publicado em: 2014-12
-
22. Synthesis and characterization of Fe3O4 nanoparticles with perspectives in biomedical applications
Nowadays the use of magnetic nanoparticles (MNP) in medical applications has exceeded expectations. In molecular imaging, MNP based on iron oxide coated with appropriated materials have several applications in vitro and in vivo studies. For applications in nanobiotechnology these MNP must present some characteristics such as size smaller than 100 nanometers,
Mat. Res.. Publicado em: 29/04/2014
-
23. A novel technology for minimizing the synthesis time of nanostructured powders in planetary mills
A key objective in processing of nanostructured powders via high energy ball milling is to minimize the synthesis time. This paper presents the application of imperialist competitive algorithm (ICA) for optimization of milling parameters in order to minimize the synthesis time of nanostructured powders in planetary mills. At first a direct relationship betwe
Mat. Res.. Publicado em: 11/03/2014
-
24. Evaluation of a nanostructured microwave absorbent coating applied to a glass fiber/polyphenylene sulfide laminated composite
The rapid coating of composites with absorbing paints yields materials that can absorb microwave radiation and still have approximately the same specific mass of the original composites. The use of paints with specific electromagnetic properties together with carbon- nanotube-based materials allows the production of structural materials of interest to the ae
Mat. Res.. Publicado em: 18/02/2014