Nanostructure
Mostrando 1-12 de 72 artigos, teses e dissertações.
-
1. Hydrogen production from aqueous glycerol using titanate nanotubes decorated with Au nanoparticles as photocatalysts
Abstract: Protonated titanate nanotubes (HTiNts) were synthesized using the hydrothermal method, followed by proton exchange with acid. Gold nanoparticles decorated titanate nanotubes (AuHTiNts) were obtained by the reduction of AuCl4- under vigorous stirring with an aqueous solution of HTiNts containing 1 wt% of ascorbic acid. To investigate the surface str
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
2. Optimized synthesis for improved TiO2 NT array surface
Resumo Diferentes espessuras de camadas de fotorresiste foram depositadas sobre a lâmina de Ti, de forma a diminuir a corrente inicial durante o processo de síntese e, assim, evitar ou reduzir a formação da camada inicial compacta de TiO2 sobre os nanotubos. Foi realizado um estudo dos estágios iniciais de crescimento dos nanotubos (NTs) para a síntese
Cerâmica. Publicado em: 15/08/2019
-
3. Processing of nanomaterials in Layer-by-Layer films: Potential applications in (bio)sensing and energy storage
Abstract: The study and preparation of new nanostructures involving the integration of distinct nanomaterials have been important for the development of new electrochemical devices for (bio)sensing and energy storage. Such devices envisage miniaturized or flexible electronic equipment for emerging technologies, including adaptive displays, artificial skin an
An. Acad. Bras. Ciênc.. Publicado em: 19/06/2019
-
4. Síntese e avaliação de nanopartículas de sílica mesoporosas na liberação controlada de feromônios repelentes de abelha
Resumo Neste estudo foi avaliado o armazenamento e liberação de feromônios repelentes de abelhas em uma nanoestrutura de sílica mesoporosa. O nanomaterial foi sintetizado via método sol-gel e caracterizado por microscopia eletrônica de transmissão, espectroscopia de infravermelho e método BET. As nanopartículas mesoporosas apresentaram-se com área
Cerâmica. Publicado em: 06/06/2019
-
5. CuO Rapid Synthesis with Different Morphologies by the Microwave Hydrothermal Method
CuO structures were synthesized by microwave hydrothermal treatment using two different mineralizing agents (NaOH and NH4OH) and were evaluated as photocatalysts. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) surface area analysis. The XRD patterns indicated the formation of
Mat. Res.. Publicado em: 11/10/2018
-
6. Cell and Bacteria-Baterial Interactions on the Ti10Mo8Nb Alloy After Surface Modification
The purpose of this study is the surface modification of Ti10Mo8Nb experimental alloy by using TiO2 nanostructure growth. Ingots of the Ti10Mo8Nb experimental alloy were produced by fusion from sheets of molybdenum, niobium, and titanium commercially pure in an arc melting furnace under argon atmosphere. The potentiostatic anodic oxidation was performed usin
Mat. Res.. Publicado em: 18/06/2018
-
7. Thermal Properties and Kinetics of Al/α-MnO2 Nanostructure Thermite
In this work, thermal properties and kinetics of Al-nanoparticles/α-MnO2 nanorods thermite were reported. The α-MnO2 nanorods were synthesized using a hydrothermal method and were characterized by X-ray powder diffraction (XRD) and X-ray photoelectron spectra (XPS), then combined with Al nanoparticles based on the ultrasonic mixing method to prepare the na
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
8. Band Structure in Carbon Nanostructure Phononic Crystals
We investigate the band structure of elastic waves propagating in carbon nanostructure phononic crystals with square, rectangular, triangular, honeycomb and Kagomé lattices. We also study the influence of carbon nanostructure cross section geometry - circular, hollow circular, square and rotated square with a 45° angle of rotation with respect to the x and
Mat. Res.. Publicado em: 27/11/2017
-
9. Multifunctional Nanocomposites between Different Carbon Nanostructures and Styrene Acrylic Latex
This work describes the preparation, characterization and properties study of multifunctional nanocomposites between poly(styrene-co -butyl acrylate) latex and different carbon nanostructures: iron-filled carbon nanotubes (CNT), graphene or graphene oxide. Different approaches were employed to prepare stable aqueous dispersions of these nanostructures, accor
J. Braz. Chem. Soc.. Publicado em: 2017-08
-
10. The correlation between tribological properties of nanostructure TiN coatings and deposition process parameters in PACVD system
ABSTRACT Titanium base coatings are being used extensively for improving wear characteristics at the surface of different parts. Titanium nitride was deposited by Plasma Assisted Chemical Vapor Deposition (PACVD) techniques with purpose improve interface with substrate, as this can increase wearing of the entire part in spite of desirable wear behavior of Ti
Matéria (Rio J.). Publicado em: 22/06/2017
-
11. NOVOS HÍBRIDOS BASEADOS EM OXIHIDRÓXIDO DE FERRO(III) E NANOPARTÍCULAS DE OURO (AuNPs/FeOOH) COMO CATALISADORES PARA A REDUÇÃO DE POLUENTES ORGÂNICOS AMBIENTAIS
A new δ-FeOOH supported nano-Au catalyst was prepared by a facile method using HAuCl4 as the gold source and NaBH4 as the reducing agent. The samples (denoted as AuNPs/FeOOH) were characterized by means of X-ray diffraction (XRD), UV-vis and infrared spectroscopies and scanning electron microscope (SEM). The obtained characterization data confirmed the form
Quím. Nova. Publicado em: 2017-06
-
12. Study of PtPd Bimetallic Nanoparticles for Fuel Cell Applications
Bimetallic nanoparticles are of special interest for their potential applications for fuel cells, mainly for portable power applications. Among the bimetallic systems, Pt-Pd bimetallic nanoparticles have received great interest as they can be widely used as effective catalysts for various electrochemical reactions. In this work, Pt-Pd alloy bimetallic nanopa
Mat. Res.. Publicado em: 15/05/2017