Nanofibers
Mostrando 13-24 de 81 artigos, teses e dissertações.
-
13. Development of a Novel Mixed Titanium, Silver Oxide Polyacrylonitrile Nanofiber as a Superior Adsorbent and its Application for MB Removal in Wastewater Treatment
In this study, a novel electrospun nanofibrous composite was synthesized from polyacrylonitrile (PAN) and well-dispersed oxide nanoparticles containing Ti and Ag (PAN-TA). The nanoparticles incorporated into the nanofibers can endow the composite with photocatalytic and antimicrobial ability. The morphologies and structure of the nanofibers were characterize
J. Braz. Chem. Soc.. Publicado em: 2018-03
-
14. Use of Amphiphilic Composites based on Clay/Carbon Nanofibers as Fillers in UHMWPE
In this work, it is proposed a new strategy to improve the dispersion of inorganic fillers in polymeric matrices by producing surface carbon nanostructures. Clay/carbon nanofibers particles were prepared and used as fillers to improve the mechanical and thermal properties of ultra-high molecular weight polyethylene (UHMWPE). Thermogravimetry (TG), differenti
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
15. Microalgae biopeptides applied in nanofibers for the development of active packaging
Abstract This study was conducted to develop PCL nanofibers with the incorporation of microalgae biopeptides and to evaluate the stability of chicken meat cuts during storage. PCL and PCL/biopeptides nanofibers were formed by electrospinning method, and the diameters obtained were 404 and 438 nm, respectively. The tensile strength, elongation, melting temper
Polímeros. Publicado em: 2017-12
-
16. Synthesis, Characterization and Photocatalytic Performance of SnS Nanofibers and SnSe Nanofibers Derived from the Electrospinning-made SnO2 Nanofibers
SnO2 nanofibers were fabricated by calcination of the electrospun PVP/SnCl4 composite nanofibers. For the first time, SnS nanofibers and SnSe nanofibers were successfully synthesized by double-crucible sulfurization and selenidation methods via inheriting the morphology of SnO2 nanofibers used as precursors, respectively. X-ray diffraction (XRD) analysis sho
Mat. Res.. Publicado em: 16/10/2017
-
17. Development of VEGF-loaded PLGA matrices in association with mesenchymal stem cells for tissue engineering
The association of bioactive molecules, such as vascular endothelial growth factor (VEGF), with nanofibers facilitates their controlled release, which could contribute to cellular migration and differentiation in tissue regeneration. In this research, the influence of their incorporation on a polylactic-co-glycolic acid (PLGA) scaffold produced by electrospi
Braz J Med Biol Res. Publicado em: 07/08/2017
-
18. Production of polymeric nanofibers with different conditions of the electrospinning process
ABSTRACT Nanofibers are materials that present high elasticity, strength, porosity and surface-area-to-volume ratio. The electrospinning method is the most widely adopted technique for forming polymeric nanofibers due to repeatability, easy scale-up process and production of long and continuous nanofibers. This method produces nanofibers with diameters rangi
Matéria (Rio J.). Publicado em: 20/07/2017
-
19. Effect of Chitosan on the Properties of Electrospun Fibers From Mixed Poly(Vinyl Alcohol)/Chitosan Solutions
Electrospun nanofibers were prepared from mixed solutions of partially hydrolyzed poly(vinyl alcohol) (PVA) and medium molar mass chitosan (CS) at different solution compositions, at 15 and 20 kV. The mats were visualized by scanning electron microscopy (SEM), and the average diameters of nanofibers were determined. Three of these solutions were chosen for f
Mat. Res.. Publicado em: 22/05/2017
-
20. What Changes in Poly(3-Hydroxybutyrate) (PHB) When Processed as Electrospun Nanofibers or Thermo-Compression Molded Film?
In the present study, PHB film was prepared by thermo-compression molding and PHB nanofibers mat was produced through electrospinning process. The nanofibers morphology was confirmed by SEM. The film and nanofibers crystallinity degree was estimated by different methods. FTIR and WAXD indicated that PHB film is more crystalline than PHB nanofibers. However,
Mat. Res.. Publicado em: 12/02/2016
-
21. Single Flexible Nanofiber to Simultaneously Realize Electricity-Magnetism Bifunctionality
In order to develop new-typed multifunctional composite nanofibers, PANI/Fe3O4/PVP flexible bifunctional composite nanofibers with simultaneous electrical conduction and magnetism have been successfully fabricated via a facile electrospinning technology. Polyvinyl pyrrolidone (PVP) is used as a matrix to construct composite nanofibers containing different am
Mat. Res.. Publicado em: 05/02/2016
-
22. Polyethylene-polyaniline Nanofiber Composites: Evaluation of Experimental Conditions of in situ Polymerization
The difficult processability of polyaniline (PAni) can be overcome by preparing composites with high density polyethylene (HDPE), resulting in a conducting material with improved mechanical properties. PAni nanofibers were synthesized in this research using a rapid mixing method, while HDPE/PAni composites were prepared by in situ polymerization using Cp2ZrC
Mat. Res.. Publicado em: 23/10/2015
-
23. Oxygen Permeability Coefficient of High Density Polyethylene/Cu Nanofibers Nanocomposites below Percolation
AbstractThe main objective of this study was to relate the elastic modulus of a polymer nanocomposite to its permeability coefficient. The materials studied included high density polyethylene (HDPE) filled with copper nanofibers (Cu-nanofibers). Both of the experimental values of the elastic modulus and the gas permeability coefficient of the HDPE/Cu-nanofib
Mat. Res.. Publicado em: 2015-10
-
24. CuO Nanofibers Immobilized on Paraffin-Impregnated Graphite Electrode and its Application in the Amperometric Detection of Glucose
1-D nanostructures are promising materials for development of electrochemical devices offering benefits such as fast electron transfer rates and large surface areas. Copper oxide nanofibers (CuO-NFs) synthesized by electrospinning technique and subsequent thermal treatment, were used to modify paraffin-impregnated graphite electrode (PIGE) for a sensitive
J. Braz. Chem. Soc.. Publicado em: 2015-08